Sony BRAVIA KDL-55W800C, BRAVIA KDL-50W800C Reference Manual

KDL-55W800C / 50W800C
Television Téléviseur
Reference Guide
US
Manuel de référence
FR
U.S.A.: http://www.sony.com/tvsupport Canada: http://www.sony.ca/support
United States Canada
1.800.222.SONY 1.877.899.SONY
Please Do Not Return the Product to the Store
Service à la clientèle Sony
Canada : http://support.sony.ca/fr États-Unis : http://www.sony.com/tvsupport
Canada États-Unis
1.877.899.SONY 1.800.222.SONY
Ne retournez pas le produit au magasin
2
US
Table of Contents
IMPORTANT NOTICE . . . . . . . . . . . . . . . . 2
Safety information . . . . . . . . . . . . . . . . . 3
Precautions . . . . . . . . . . . . . . . . . . . . . . . 5
Parts and Controls . . . . . . . . . . . . . . . .7
Controls and Indicators . . . . . . . . . . . . . 7
Inputs and Outputs . . . . . . . . . . . . . . . . 8
Using Remote Control . . . . . . . . . . . . .9
Remote Control Parts Description. . . . . 9
Connecting the TV . . . . . . . . . . . . . . . 11
Showing a Set Top Box with HDMI
connection . . . . . . . . . . . . . . . . . . . . . . 11
Showing a Set Top Box with
COMPONENT connection . . . . . . . . . . . 12
Cable System or VHF/UHF Antenna
System. . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting MHL Device. . . . . . . . . . . . 13
Showing HD BRAVIA® Sync™ Basic
Connection . . . . . . . . . . . . . . . . . . . . . . 14
Showing HD Basic Connection with
Home Theater System . . . . . . . . . . . . . 15
Showing PC Connection with SD
VCR/DVD . . . . . . . . . . . . . . . . . . . . . . . . 16
Installing the TV to the Wall . . . . . . . 17
Detaching the Table-Top Stand from
the TV. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Installing the TV against a wall or
enclosed area. . . . . . . . . . . . . . . . . . .19
Troubleshooting. . . . . . . . . . . . . . . . 20
Troubles and Solutions . . . . . . . . . . . . 20
Specifications . . . . . . . . . . . . . . . . . . . 21
Introduction
Thank you for choosing this Sony product. Before operating the TV, please read this manual t
horoughly and retain it for future reference.
Note
• Images and illustrations used in Startup Guide and this manual are for reference only and may differ from actual product appearance.
Location of the identification label
Labels for the TV Model No. and Power Supply rating are located on the rear of the TV. Labels for the AC adapter Model No. and Serial No. are loc
ated on the bottom of the AC adapter.
CAUTION
To prevent electric shock and blade exposure, do not use this AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted.
• Operate the TV only DC 19.5 V (with AC adapter).
• Some people may experience discomfort (such as eye st
rain, fatigue, or nausea) while watching 3D video images or playing stereoscopic 3D games. Sony recommends that all viewers take regular breaks while watching 3D video images or playing stereoscopic 3D games. The length and frequency of necessary breaks will vary from person to person. You must decide what works best. If you experience any discomfort, you should stop watching the 3D video images or playing stereoscopic 3D games until the discomfort ends; consult a doctor if you believe necessary. You should also review (i) the instruction manual of any other device or media used with this television and (ii) our website (http://www.sony.com/tvsupport) for the latest inf
ormation. The vision of young children (especially those under six years old) is still under development. Consult your doctor (such as a pediatrician or eye doctor) before allowing young children to watch 3D video images or play stereoscopic 3D games. Adults should supervise young children to ensure they follow the recommendations listed above.
• Do not use, store, or leave the 3D Glasses or battery near a f
ire, or in places with a high temperature, e.g., in direct
sunlight, or in sun-heated cars.
The 50 class has a 49.5 inch viewable image size and the 55 clas
s has a 54.6 inch viewable image size (measured
diagonally).
IMPORTANT NOTICE
Owner’s Record
The model and serial numbers are located at the side and rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this TV.
Model Name
Serial No.
3
US
US
Your BRAVIA TV is ENERGY STAR® qualified in the default mode. It meets strict energy efficiency guidelines s
et by the U.S. Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of these government agencies, designed to
promote energy efficient products and practices. Changes to certain features, settings, and functionalities (
when available) of this TV (i.e. Picture/Sound, Light Sensor, Power Savings, Picture Scene/Mode, Auto Display, Shop Front Display Settings) can increase or change the power consumption. The “Standard” picture mode is default settings optimized f
or the input signal selected. Your BRAVIA TV is tested in these settings for ENERGY STAR qualification. Depending upon such changed settings, the power c
onsumption may exceed the limits required for the
ENERGY STAR qualification in the default mode.
FCC Related Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
re
ceiver.
• Connect the equipment into an outlet on a circuit
diff
erent from that to which the receiver is connected.
• Consult the dealer or an experienc
ed radio/TV technician
for help.
Safety and Regulatory
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this dev
ice is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
Only use Wireless LAN indoors when using it with IEEE 80
2.11a (5 GHz).
This equipment complies with FCC/IC radiation exposure lim
its set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20 cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles).
This device and its antenna(s) must not be co-located or oper
ating with any other antenna or transmitter except
Grant condition.
Note
This television includes a QAM demodulator which should allow you to receive unscrambled digital cable television programming via subscription service to a cable service provider. Availability of digital cable television programming in your area depends on the type of programming and signal provided by your cable service provider.
NOTE ON AC ADAPTER
Warning
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire or shock hazard, do not place objects filled wit
h liquids, such as vases, on the apparatus. Do not install this equipment in a confined space, such as a book
shelf or similar unit.
• Please ensure that the AC power outlet is installed near
t
he equipment and shall be easily accessible.
• Be sure to use the supplied AC adapter and AC power
c
ord. Otherwise it may cause a malfunction.
• Connect the AC adapter to an easily accessible AC power
ou
tlet.
• Do not coil the AC power cord
around the AC adapter. The c
ore wire may be cut and/or it may cause a malfunction of the TV.
• Do not touch the AC adapter with
wet hands.
• If you notice an abnormality in
the AC adapter, disconnect it from the AC power outlet
immediately.
• The set is not disconnected from the AC source as long as it
is connected to the AC power outlet, even if the set
itself has been turned off.
• As the AC adapter will become warm when it is used for a lon
g time, you may feel hot when touching it by hand.
Safety information
Declaration of Conformity
Trad e Name: S ONY Model: KDL-55W800C / KDL-50W800C Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules. Oper
ation is subject to the following two conditions: (1) This device may not cause harmful interference, and (
2) this device must accept any interference received, including interference that may cause undesired operation.
Pursuant to FCC regulations, you are cautioned that any c
hanges or modifications not expressly approved in this manual could void your authority to operate this equipment.
4
US
Before setting up your TV
Some TV models are packaged with a detached Table-Top Stand so you can mount your TV to a wall right away. See page 17 (Installing the TV to the Wall) if you want to mount the TV to a wall. If you are not mounting the TV to a wall, you will ne
ed to attach the Table-Top Stand. You will need a Phillips screwdriver (not supplied) and the supplied screws to complete the task. Look for the supplied Startup Guide. Be sure to consider the following while setting up your TV:
• Disconnect all cables when carrying the TV.
• Carry the TV with the adequate number of people; larger
siz
e TVs require two or more people.
• Correct hand placement while carrying the TV is very
im
portant for safety and to avoid damage.
• Ensure your TV has adequate ventilation, see page 19.
• For best picture quality, do not expose the screen to direct
illum
ination or sunlight.
• Avoid installing the TV in a room with reflective wall and
floor m
aterials.
• Avoid moving the TV from a cold area to a warm area.
Sudden r
oom temperature changes may cause moisture
condensation. This may cause the TV to show poor picture and/or poor color. Should this occur, allow moisture to evaporate completely before powering the TV on.
Securing the TV
Sony strongly recommends taking measures to prevent the TV from toppling over. Unsecured TVs may topple and result in pr
operty damage, serious bodily
injury or even death.
Preventing the TV from Toppling
• Secure the TV to a wall and/or stand.
• Do not allow children to play or climb on furniture and TV
se
ts.
• Avoid placing or hanging items on the TV.
• Never install the TV on:
slipper
y, unstable and/or uneven surfaces.
f
urniture that can easily be used as steps, such as a
chest of drawers.
• Install the TV where it cannot be pulled, pushed or
knock
ed over.
• Route all AC power cords and connecting cables so that
t
hey are not accessible to curious children.
Recommended Measures to Secure the TV
Consider the following measures when securing your TV to a Stand (not supplied).
1 Secure the Stand for the TV.
Make sure the Stand can adequately support the weight of
the TV. Use two angle braces (not supplied) to secure the stand. For each angle brace use the appropriate hardware to:
• Attach one side of the angle brace to the wall stud.
• Attach the other side to the Stand.
2 Secure the TV to the Stand.
Use the optional hardware listed as follows (not su
pplied):
• M6 machine screws (screwed into the TV’s rear cover)
• A screw or similar (attach it to the Stand)
• Rope or chain (strong enough to support the weight of
the TV). Make sure that there is no excess slack in the rope or chain.
The length of the M6 machine screw differs depending on th
e rope or chain diameter. Please see below illustration.
Angle brace (not supplied)
Stand
Screw hole on the rear cover
M6 machine screw (not supplied)
Rope or chain (not supplied)
Screw (not supplied)
10-12 mm
Screw M6
Rope or chain
TV’s rear cover
5
US
US
3 Anchor the TV to the wall by using bolts, wall anchor and
chain (or rope). Attach the Wall-Mount Attachment (supplie
d with the
TV) to the rear of the TV.
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to fasten the Wall-Mount Attachment when atta
ching them to the TV.
• Use only a flat head screwdriver to install the Wall-Mount Attachment. U
se of another tool might result in over torqueing the Wall-Mount Attachment and damaging the TV.
Please see below illustration for M6 eye bolt length.
Note
• Your TV is shipped with screws attached to the rear of the TV depending on the TV model. (They are fastened in the screw holes for wall mounting.) Be sure to remove the upper two screws prior to anchoring the TV to a wall.
• Securing the TV to the stand without securing the TV and the
stand to the wall provides minimum protection against the TV toppling over. For further protection, be sure to follow the three measures recommended.
How to care for your BRAVIA TV
Safety is very important. Please read and follow the safety documentation (Safety Booklet) separately provided.
Unplug the TV and other c
onnected equipment from the wall outlet before you begin cleaning your TV.
• Wipe the LCD screen gently
w
ith a soft cloth.
• Stubborn stains may be
r
emoved with a cloth slightly moistened with a solution of mild soap and warm water.
• If using a chemically pr
etreated cloth, please follow the instruction provided
on the package.
• Never spray water or detergent directly on the TV set. It may dr
ip to the bottom of the screen or exterior parts and
enter the TV set, and may cause damage to the TV set.
• Never use strong solvents such as a thinner, alcohol or b
enzine for cleaning.
• Do not plug in the TV into the wall outlet until the m
oisture from cleaning has evaporated. The TV should also be placed on a stable surface to prevent it fr
om toppling over (see page 4). If you have young children or pets at home, check regularly to ensure the TV is se
curely fastened.
1.5 N·m {15 kgf·cm}
M6 eye bolts (not supplied)
Wall-mount holes
Rope or chain (not supplied)
Wall-anchor (not supplied)
8-12 mm
M6 eye bolt
Wall-Mount Attachment
Precautions
6
US
The following chart shows the high-definition (HD) and standard-definition (SD) video formats supported by your BRAVIA TV inputs.
*1 For details of supported formats, refer to the “S
pecifications” in this manual.
*2 For supported PC formats refer to the Help Guide
The BRAVIA® Full HDTV Experience
Thank you for choosing Sony! Your new BRAVIA® TV opens the door to the “Full HDTV Experience.” This document will help you get the most out of your TV. Please take a moment to register your TV at:
U.S.A.: http://productregistration.sony.com Canada: http://www.sony.ca/registration
Four Steps to a Full HD Experience
Set, Source, Sound, and Setup.
1 Set
Now that you have made the best selection in LED backlit L
CD TV technology, be sure to remove all of the accessories from the packaging before setting up your TV.
2 Source
To experience the stunning detail of your BR
AVIA TV,
you need access to HD programming.
• Upgrade your signal or content source to high-
defin
ition (HD) by contacting your HD service provider.
• Receive over-the-air HD broadcasts with an HD­qualit
y antenna connected directly to the back of your
TV. Visit ht
tp://www.antennaweb.org for more
information on antenna selection and setup.
• Discover the wealth of entertainment now available on super
-high resolution Blu-ray Disc™ player and
other Sony HD equipment.
3 Sound
Complete the high-definition experience with a BR
AVIA
Sync™ surround sound system or A/V receiver from Sony.
4 Setup
Install your TV and connect your sources. See page 11 for sample connection diagrams. To help assure the h
ighest quality for your HD experience, use Sony HDMI
(High-Definition Multimedia Interface) cables.
To learn more about HDTV, visit:
U.S.A.: http://www.sony.com/HDTV Canada: http://www.sony.ca/hdtv
This TV displays all video input signals in a
resolution of 1,920 dots × 1,080 lines.
INPUT VIDEO AUDIO
SUPPORTED FORMATS
1080/
24p/
30p
1080p*11080i 720/
24p/
30p
720p*1480p 480i PC*
2
HD
HDMI
COMPONENT
Audio L/R
SD
VIDEO
Composite
video
connection
Audio L/R
7
US
US
Parts and Controls
Remote Control sensor* / Light
sensor*
/ Illumination LED / 3D Sync
Transmitter*
The Illumination LED lights up or blinks according to the status of the TV.
•White When turning on the TV/picture off mode/software update, etc.
•Cyan When connecting with a mobile device wirelessly.
•Amber Timer is set.
 (Power)
CH +/- (Channel)
+/- (Volume)
TV
Switch to a TV channel or input from other applications.
 (Input select)
Display and select the input source.
* Do not place anything near the sensor.
Controls and Indicators
TV
Ȫ ȫ
Ȭ
ȭ
8
US
 VIDEO IN, / COMPONENT
IN
• For a composite connection:
Use VIDEO IN, and (L/R) of / COMPONENT IN*.
• For a component connection:
Use Y, PB, PR, and (L/R).
DIGITAL AUDIO OUT (OPTICAL)
 LAN
 CABLE/ANTENNA
Connect to your cable or antenna.
REMOTE IR IN
REMOTE Serial Control
• These jacks are for receiving the external control signal. Enables extended control of the TV using RS232C via the IR IN and Serial Control jacks. IR IN : connect to the IR out terminal of the home controller. Serial Control : connect to the RS232C terminal of the home controller.
• Take care to not connect to headphones or an external audio system.
• If [RS232C Control] is set to [On], [BRAVIA Sync Settings] are not available.
USB 1/2
• Connecting a large USB device may interfere with other connected devices beside it.
• When connecting a large USB device, connect to the USB 1 jack.
HDMI IN 2/3/4
If connecting a digital audio system that is compatible with Audio Return Channel (ARC) technology, use HDMI IN
4. If not, an additional connection with
DIGITAL AUDIO OUT (OPTICAL) is necessary.
AUDIO OUT /
To listen to the TV's sound through the connected equipment, press HOME. Select [Settings] [Sound] [Headphone/Audio out] and then select the desired item.
HDMI IN 1/MHL
You can connect your MHL (Mobile High-definition Link) device using an HD quality MHL cable.
* When connecting mono equipment, connect to
the L (MONO) audio jack.
Inputs and Outputs
Ȯ
Ȱ
ȱ
Ȫȫ
ȭȬ
ȭ Ȯ
ȩ
ȯ
9
US
US
Using Remote Control
INPUT
Display and select the input source.
POWER
Turn on or turn off the TV (standby mode).
SYNC MENU
Display the BRAVIA Sync Menu.
(Twin picture/PIP)*1*
2
Display two pictures simultaneously.
Number buttons
Use with the 0-9 buttons to select digital channels.
PIC OFF*
2
Turn the picture off, while sound remains on.
Color buttons
Execute correspondent function at that time.
DISPLAY
Display information about the channel/ program/input you are viewing.
NETFLIX
Access the “NETFLIX” online service.
HELP
Display Help Menu.
Remote Control Parts Description
Ȫ
ȩ
ȫ
Ȭ
ȭ
Ȯ
ȯ
10
US
ACTION MENU
Display a list of contextual functions.
TV
Switch to a TV channel or input from other applications.
GUIDE*
1
Display the digital program guide.
BACK
Return to previous screen.
HOME
Display the TV Home Menu.
DISCOVER
Bring up the Content Bar to search for content.
//// (Item select/Enter)
VOL +/– (Volume)
Adjust the volume.
JUMP
Jump back and forth between two channels or inputs. The TV alternates between the current channel or input and the last channel or input that was selected.
MUTING
Mute the sound. Press again to restore the sound.
CH +/– (Channel)
Select the channel.
AUDIO
Change the language for the program currently being viewed.
CC/SUBTITLE
Turn subtitles on or off (when the feature is available).
//////
Operate media contents on TV and connected BRAVIA Sync compatible device.
WIDE
Change the screen format.
FOOTBALL
Turn Live Football Mode on or off (when the feature is available).
*1 The location, availability and function of
remote control button may vary depending on your country/region/TV model.
*2 Twin Picture/PIC OFF function will be available
from July 2015. You will receive Twin Picture/ PIC OFF function automatically as a network software upgrade. Make sure your TV is connected to the Internet. If you do not have a network connection, you will be able to download the software from the Sony support website using your PC. For details on how to upgrade, please visit the Sony support website.
Guidelines for IR Remote Control
• Point your remote control directly at the IR sensor located on your TV.
• Make sure that no objects are blocking th
e path between the remote control
and the IR sensor on your TV.
• Fluorescent lamps can interfere with y
our remote control; try turning off the
fluorescent lamps.
• If you are having problems with the r
emote control, reinsert or replace your batteries and make sure that they are correctly inserted.
11
US
US
Connecting the TV
For more information on connections, refer to the Help Guide.
Note
• Use an antenna cable connector no greater than 14 mm thick.
• When connecting the cable to the Cable/ A
ntenna, input finger tighten only, over
tightening the connection can damage the TV.
• Use an HDMI cable connector within 12 mm (
thickness) × 21 mm (width).
Recommendation for an F type plug
Projection of the inner wire from the c
onnection part must be less than 1.5 mm.
(Reference drawing for an F type plug)
1.5 mm max.
7 mm max.
Showing a Set Top Box with HDMI connection
Set Top Box
12
US
Showing a Set Top Box with COMPONENT connection
Set Top Box
Cable System or VHF/UHF Antenna System
Cable/Antenna
13
US
US
The TV simultaneously charges the MHL-compatible connected device while playing photo/ music/video files. You can use the TV remote control to control the connected MHL­compatible device.
Note
• If [Auto input change (MHL)] is set to [On], the TV automatically switches to HDMI IN 1/MHL from other input when MHL-compatible device is connected to HDMI IN 1/MHL jack. The availability of [Auto input change (MHL)] depends on whether the MHL-compatible device can support this feature.
• If [Charge MHL during Power Off] is set to [On], you can continue charging the MHL-compatible device e
ven when the TV is in standby mode.
Connecting MHL Device
Use authorized MHL 2 CABLE with MHL logo
MHL device
14
US
*1Signifies a BRAVIA Sync capable device. *2The optical connection is only needed for A/V receivers that do not support ARC (Audio
Return Channel). Set the speaker settings to audio out, press HOME, then select [Settings] [Sound] [Speakers] [Audio System]. Set the HDMI CEC settings on the TV and AV receiver to allow for system audio control for ARC connections.
Showing HD BRAVIA® Sync™ Basic Connection
*1Blu-ray Disc
HD Cable Box or HD Satellite Receiver
*
1
A/V Receiver
SAT (Dish) Cable/ Antenna
*
2
Optical Connection
*
1
Rear of TV
Under Panel
15
US
US
* The optical connection is only needed for home theater system that do not support ARC
(Audio Return Channel) when connecting with HDMI. Set the speaker settings to audio out, press HOME, then select [Settings] [Sound] [Speakers] [Audio System]. Set the HDMI CEC settings on the TV and AV receiver to allow for system audio control for ARC connections.
Showing HD Basic Connection with Home Theater System
VIDEO L R
Cable/ Antenna
Blu-ray Disc/DVD
SD Cable Box or SD Satellite Receiver
Cable/ SAT (Dish)
Home Theater System
* Optical
Connection
Rear of TV
Side Panel
Under Panel
Loading...
+ 34 hidden pages