Sony Bravia KDL-42EX443, Bravia KDL-42EX440, Bravia KDL-32EX343, Bravia KDL-32EX340 Operating Instructions Manual
A-EAQ-100-11(1)
LCD TV
Operating Instructions
Start-up Guide
Watching TV
Using Optional Equipment
Using MENU Functions
Network Set-up
Additional Information
KDL-42EX443 / 42EX440 / 32EX343 / 32EX340
NOTICE FOR
CUSTOMERS IN
THE UNITED
KINGDOM
A moulded plug complying with
BS1363 is fitted to this equipment for
your safety and convenience.
Should the fuse in the plug supplied
need to be replaced with the same
rating of fuse approved by ASTA or
BSI to BS 1362 (i.e., m arked with or
) must be used.
If the plug supplied with this
equipment has a detachable fuse
cover, be sure to attach the fuse cover
after you change the fuse. Never use
the plug without the fuse cover. If you
should lose the fuse cover, please
contact your nearest Sony service
station.
FUSE
FUSE
How to replace the fuse
Open the fuse compartment with a
blade screwdriver, and replace the
fuse.
Please refer to the illustration that
actually equipped with the product.
Introduction
Thank you for choosing this Sony
product.
Before operating the TV, please read
this manual thoroughly and retain it for
future reference.
Notice for Digital TV
function
• Any functions related to Digital TV
( ) will only work in countries or
areas where DVB-T/DVB-T2*
(MPEG-2 and H.264/MPEG-4 AVC)
digital terrestrial signals are
broadcast or wher e you have access
to a compatible DVB-C (MPEG-2
and H.264/MPEG-4 AVC) cable
service. Please confirm with your
local dealer if you can receive a
DVB-T/DVB-T2* signal where you
live or ask your cable provider if their
DVB-C cable service is suitable for
integrated operation with this TV.
• Your cable provider may charge a
fee for their services, or require you
to agree to its terms and conditions
of business.
• This TV set complies with DVB-T/
DVB-T2* and DVB-C specifications,
but compatibility with future DVB-T/
DVB-T2* digital terrestrial and DVBC digital cable broadcasts are not
guaranteed.
• Some Digital TV functions may not
be available in some countries/areas
and DVB-C cable may not operate
correctly with some providers.
This product has been
manufactured by or on behalf of
Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075
Japan. Inquiries related to
product compliance based on
European Union legislation shall
be addressed to the authorized
representative, Sony
Deutschland GmbH, Hedelfinger
Strasse 61, 70327 Stuttgart,
Germany. For any service or
guarantee matters, please refer
to the addresses provided in the
separate service or guarantee
documents.
~
• The illustrations used in this
manual are of the KDL42EX440 unless otherwise
state.
* DVB-T2 is not available for TV
model series KDL-42EX440/
32EX340.
DVB-T2 is available for TV
model series KDL-42EX443/
32EX343.
Trademark information
• is a registered trademark of
the DVB Project.
• HDMI, the HDMI Logo, and HighDefinition Multimedia Interface are
trademarks or regist ered trademarks
of HDMI Licensing LLC in the United
States and other countries.
• Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
• “BRAVIA” and are
trademarks of Sony Corporation.
Location of the
identification label
Labels for Model No., Production Date
(month/year) and Power Supply rating
(in accordance with applicable safety
regulation) are located on the rear of
the TV or package.
It is recommended that
you set “Auto Service
Update” to “On”, so as
to allow new digital
services to be added
automatically as they
become available.
Select “Settings” t “Channel Set-up”
t “Digital Set-up” t “Technical Set-
up” t “Auto Service Update”.
z
• It is recommended that you set
“Auto Service Update” to “On”,
so as to allow new digital
services to be added
automatically as they become
available. If set to “Off”, new
digital services will be notified
by an on-screen message and
the services will not be
automatically added. The
availability of this function
depends on your region/
country. If unavailable, perform
“Digital Auto Tuning” to add
new services.
GB
2
Table of Contents
Start-up Guide 4
Safety Information...........................................................................................................10
Precautions......................................................................................................................11
Overview of the remote ..................................................................................................13
Overview of the TV buttons and indicators ..................................................................15
Watching TV
Watching TV ....................................................................................................................16
Using the Digital Electronic Programme Guide (EPG) .......................................18
Using the Digital Programme List ........................................................................19
Using Optional Equipment
Connecting optional equipment ....................................................................................21
Viewing pictures from connected equipment ..............................................................22
Playing Back Photo/Music/Video via USB ....................................................................23
Photo Frame ....................................................................................................................26
Using BRAVIA Sync with Control for HDMI ..................................................................27
Using MENU Functions
Navigating through TV Menu .........................................................................................29
Settings ............................................................................................................................30
Network Set-up
Preparing a Network .......................................................................................................42
Setting up the Internet Connection ...............................................................................42
Additional Information
Installing the Accessories (Wall-Mount Bracket) .........................................................44
Specifications ..................................................................................................................47
Troubleshooting..............................................................................................................50
: for digital channels only
• Before operating the TV, please read “Safety Information” (page 10). Retain this manual for future reference.
• Instructions about “Installing Wall Mount Bracket” are included within this TV’s instructions manual.
3
GB
Start-up Guide
1: Checking the
accessories
Table-Top Stand (1)
Screws for stand (M5 × 16) (3)
Remote RM-ED049 (1)
Size AA batteries (2)
x To insert batteries into the remote
Push to
open
~
• Observe the correct polarity when inserting
batteries.
• Do not use different types of batteries together or
mix old and new batteries.
• Dispose of batteries in an environmentally friendly
way. Certain regions may regulate the disposal of
batteries. Please consult your local authority.
• Handle the remote with care. Do not drop or step
on it, or spill liquid of any kind onto it.
• Do not place the remote in a location near a heat
source, a place subject to direct sunlight, or a
damp room.
2: Attaching the
stand
~
• For best picture quality, do not expose the screen
to direct illumination or sunlight.
Follow the assembling steps required to place
on a TV stand.
1 Refer to the supplied Table-Top Stand
leaflet for proper attachment for some TV
models.
2 Place the TV with its screen facing down
on a level and stable surface covered
with a thick and soft cloth.
3 Fix the TV to the stand according to the
arrow marks that guide the screw
holes using the supplied screws.
Thick and soft cloth
~
• Be careful not to hit the Table-Top Stand against
the edge of the surface when attaching it.
~
• Hold the Table-Top Stand with one hand to avoid it
dropping when attaching.
~
• This TV is very heavy, so two or more people
should place the TV onto thick and soft cloth.
GB
4
• If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to securely tighten the three supplied
screws, otherwise the TV may fall down.
• Use an appropriate screwdriver to attach the
screws tightly without damaging the screw head.
• Please ensure the AC power cord is away from the
stand installation location when you attach the
stand.
• Do not touch the inner side of the bottom of the TV
stand to avoid being hurt.
3: Connecting an
aerial/cable/
VCR/DVD
recorder
Connecting an aerial/cable only
Terrestrial signal
or cable
Coaxial cable
Connecting an aerial/cable/VCR/DVD
recorder with SCART
Coaxial cable
Terrestrial
signal or
cable
Scart lead
Start-up Guide
VCR/DVD recorder
Coaxial cable
(Continued)
GB
5
Connecting an aerial/cable/VCR/DVD
recorder with HDMI
Coaxial
cable
Terrestrial
signal or
cable
HDMI cable
Coaxial cable
VCR/DVD recorder
4: Preventing the
TV from
toppling over
1 Install a wood screw (4 mm in diameter,
not supplied) in the TV stand.
2 Install a machine screw (M4, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine
screw with a strong cord (not supplied).
The length of the M4 machine screw differs
depending on the cord diameter. Please
refer to below illustration.
Screw M4
Cord
6-8 mm
z
• An optional Sony support belt kit is used to secure
the TV. Contact your nearest Sony Service Centre
to purchase a kit. Have your TV model name ready
for reference.
TV’s Table-Top
Stand
GB
6
5:
Selecting the
language,
country/region
and location
3 Press F/f to select the language
displayed on the menu screens, then
press .
Language
Select language.
3,4,5,6
1 Connect the TV to your mains socket
(220-240V AC, 50Hz).
Select Next
4 Follow the on-screen instructions to
select the country/region in which you will
operate the TV.
If the country/region which you want to use
on the TV does not appear in the list, select
“-” instead of a country/region.
5 Follow the on-screen instructions to set
the PIN code.
z
• Any PIN code can be used, except 0000. To
change the PIN code later, see page 38.
6 Follow the on-screen instructions to
select the location type in which you will
operate the TV.
This option selects the initial picture mode
appropriate for the typical lighting condition
in these environments.
In Shop mode, some settings will be
periodically reset for Shop usage.
Start-up Guide
2 Touch "/1 on the front of the TV.
When you turn on the TV for the first time,
the Language menu appears on the
screen.
~
• When you turn on the TV, the power indicator
lights up in green.
GB
7
6: Auto-tuning
the TV
1 Press F/f to select the broadcast type,
then press .
Auto Tuning
Select the broadcast type to automatically search for services
Digital and Analogue
Digital
Analogue
Skip
~
• This step will appear if any analogue channel
is found.
4 Set the current day and time.
~
• This step will appear only if clock has not been
obtained from digital broadcasting.
The message “Set-up complete” will
appear on the screen. Press .
The TV has now tuned in all the available
channels.
z
• USB System Update
You can update the TV system using USB memory.
Obtain information from the website below.
http://support.sony-europe.com/TV/
Select Back Next
RETURN
Back
2 Press F/f to select “Antenna” or
“Cable”, then press .
Select “Antenna” to receive terrestrial TV
broadcasting by an external antenna.
Select “Cable” if you are a Cable TV
subscriber not using an external set-top
box.
If you select “Cable”, the screen for
selecting the scan type appears. See “To
tune the TV for Cable connection” (page 8).
The TV then starts searching for all
available digital channels, followed by all
available analogue channels. This may take
some time, so do not press any buttons on
the TV or remote while proceeding.
~
• In some countries, you may select “Antenna”
instead of “Cable” to receive Cable TV
programmes.
If a message appears for you to confirm
the aerial connection
No digital or analogue channels were
found. Check all the aerial/cable
connections and press to start autotuning again.
3 Programme Sorting (Only in analogue
mode): Changes the order in which the
analogue channels are stored on the TV.
1 Press F/f to select the channel you
want to move to a new position, then
press
g.
2 Press
If you do not change the order in which the
analogue channels are stored on the TV,
press HOME to go to next step.
F/f to select the new position for
your channel, then press .
x To tune the TV for Cable connection
1 Press and F/f to select “Quick Scan”
or “Full Scan”, then press .
“Quick Scan” : channels are tuned
according to the cable operator information
within the broadcast signal.
Recommended setting for “Frequency” and
“Network ID” is “Auto”.
This option is recommended for fast tuning
when supported by your cable operator.
If the “Quick Scan” does not tune, please
use the “Full Scan” method below.
“Full Scan” : All available channels are
tuned and stored. This procedure may take
some time.
This option is recommended when “Quick
Scan” is not supported by your cable
provider.
2 Press f to select “Start”.
The TV starts searching for channels. Do
not press any buttons on the TV or remote.
~
• Some cable providers do not support “Quick
Scan”. If no channels are detected using “Quick
Scan”, perform “Full Scan”.
GB
8
Detaching the
Table-Top Stand
from the TV
~
• Do not remove the Table-Top Stand for any reason
other than to wall-mount the TV.
1 Place the TV with its screen facing down
on a level and stable surface covered
with a thick and soft cloth.
~
• Be careful not to hit the Table-Top Stand
against the edge of the surface when placing
the TV with its screen facing down.
2 Remove the screws guided by the arrow
marks of the TV. Do not remove any
other screws.
Start-up Guide
Thick and soft cloth
~
• Hold the Table-Top Stand with one hand to avoid it
dropping when detaching.
z
• Be sure the TV is on the vertical position before
switching on. TV set must not be powered on with
LCD panel face down to avoid uneven picture
uniformity.
GB
9
Safety Information
Installation/Set-up
Install and use the TV set in
accordance with the instructions
below in order to avoid any risk of fire,
electrical shock or damage and/or
injuries.
Installation
• The TV set should be installed near
an easily accessible mains socket.
• Place the TV set on a stable, level
surface.
• Only qualified service personnel
should carry out wall installations.
• For safety reasons, it is strongly
recommended that you use Sony
accessories, including:
– Wall-mount bracket
SU-WL500
(KDL-42EX443/42EX440)
– Wall-mount bracket
SU-WL100
(KDL-32EX343/32EX340)
• Be sure to use the screws supplied
with the Wall-mount bracket when
attaching the mounting hooks to the
TV set. The supplied screws are
designed as indicated by illustration
when measured from the attaching
surface of the mounting hook. The
diameter and length of the screws
differ depending on the Wall-mount
bracket model. Use of screws other
than those supplied may result in
internal damage to the TV set or
cause it to fall, etc.
32 TV: 6.5mm ~ 10mm
42 TV: 8mm ~ 12mm
Screw (supplied with the
Wall-mount bracket)
Mounting Hook
Hook attachment on rear
of TV set
Transporting
• Before transporting the TV set,
disconnect all cables.
• Two or three people are needed to
transport a large TV set.
• When transporting the TV set by
hand, hold it as shown in the
illustration. Do not put stress on the
LCD panel and the frame around the
screen.
Be sure to hold the bottom of
the panel, not the front part.
• When transporting the TV set, do not
subject it to jolts or excessive
vibration.
• When transporting the TV set for
repairs or when moving, pack it
using the original carton and
packing material.
Ventilation
• Never cover the ventilation holes or
insert anything in the cabinet.
• Leave space around the TV set as
shown below.
• It is strongly recommended that you
use a Sony wall-mount bracket in
order to provide adequate aircirculation.
Installed on the wall
30 cm
10 cm 10 cm
Leave at least this space around
the set.
10 cm
Installed with stand
30 cm
10 cm
Leave at least this space around
the set.
• To ensure proper ventilation and
prevent the collection of dirt or dust:
– Do not lay the TV set flat, install
upside down, backwards, or
sideways.
– Do not place the TV set on a
shelf, rug, bed or in a closet.
– Do not cover the TV set with a
cloth, such as curtains, or items
such as newspapers, etc.
– Do not install the TV set as shown
below.
Air circulation is blocked.
10 cm
6 cm
Mains lead
Handle the mains lead and socket as
follows in order to avoid any risk of fire,
electrical shock or damage and/or
injuries:
– Use only mains leads supplied by
Sony, not other suppliers.
– Insert the plug fully into the mains
socket.
– Operate the TV set on a 220–240 V
AC supply only.
– When wiring cables, be sure to
unplug the mains lead for your
safety and take care not to catch
your feet on the cables.
– Disconnect the mains lead from
the mains socket before working
on or moving the TV set.
– Keep the mains lead away from
heat sources.
– Unplug the mains plug and clean it
regularly. If the plug is covered
with dust and it picks up moisture,
its insulation may deteriorate,
which could result in a fire.
Notes
• Do not use the supplied mains lead
on any other equipment.
• Do not pinch, bend, or twist the
mains lead excessively. The core
conductors may be exposed or
broken.
• Do not modify the mains lead.
• Do not put anything heavy on the
mains lead.
• Do not pull on the mains lead itself
when disconnecting the mains lead.
• Do not connect too many ap pliances
to the same mains socket.
• Do not use a poor fitting mains
socket.
Prohibited Usage
Do not install/use the TV set in
locations, environments or situations
such as those listed below, or the TV
set may malfunction and cause a fire,
electrical shock, damage and/or
injuries.
Location:
• Outdoors (in direct sunlight), at the
seashore, on a ship or other vessel,
inside a vehicle, in medical
institutions, unstable locations, near
water, rain, moisture or smoke.
• If the TV is placed in the changing
room of a public bath or hot spring,
the TV may be damaged by airborne
sulfur, etc.
Cleaning:
Do not spray water or detergent
directly on the TV set. It may drip to the
bottom of the screen or exterior parts
and get inside, resulting in a
malfunction.
• When lifting or moving the TV set,
hold it firmly from the bottom.
GB
10
Wall Wall
Environment:
• Places that are hot, humid, or
excessively dusty; where insects
may enter; where it might be
exposed to mechanical vibration,
near flammable objects (candles,
etc). The TV set shall not be exposed
to dripping or splashing and no
objects filled with liquids, such as
vases, shall be placed on the TV.
• Do not place the TV in a humid or
dusty space, or in a room with oily
smoke or steam (near cooking tables
or humidifiers). Fire, electric shock,
or warping may result.
Situation:
• Do not use when your han ds are wet,
with the cabinet removed, or with
attachments not recommended by
the manufacturer. Disconnect the TV
set from mains socket and aerial
during lightning storms.
• Do not install the TV so that it sticks
out into an open space. Injury or
damage from a person or object
bumping into the TV may result.
Broken pieces:
• Do not throw anything at the TV set.
The screen glass may break by the
impact and cause serious injury.
• If the surface of the TV set cracks, do
not touch it until yo u have unplugged
the mains lead. Otherwise electric
shock may result.
• Do not subject the LCD screen to
any strong impact or shock. The
screen glass may crack or shatter
and cause injury.
When not in use
• If you will not be using the TV set for
several days, the TV set should be
disconnected from the mains for
environmental and safety reasons.
• As the TV set is not disconnected
from the mains when the TV set is
just turned off, pull the plug from the
mains to disconnect the TV set
completely.
• However, some TV sets may have
features that require the TV set to be
left in standby to work correctly.
For children
• Do not allow children to climb on the
TV set.
• Keep small accessories out of the
reach of chil dren, so that they are not
mistakenly swallowed.
If the following problems
occur...
Turn off the TV set and unplug the
mains lead immediately if any of the
following problems occur.
Ask your dealer or Sony service centre
to have it checked by qualified service
personnel.
When:
– Mains lead is damaged.
– Poor fitting of mains socket.
– TV set is damaged by being
dropped, hit or having something
thrown at it.
– Any liquid or solid object falls
through openings in the cabinet.
Warning
To prevent the spread of fire, keep
candles or other open flames away
from this product at all time.
Precautions
Viewing the TV
• View the TV in moderate light, as
viewing the TV in poor light or during
long period of time, strains your
eyes.
• When using headphones, adjust the
volume so as to avoid excessive
levels, as hearing damage may
result.
LCD Screen
• Although the LCD screen is made
with high-precision technology and
99.99% or more of the pixels are
effective, black dots may appear or
bright points of light (red, blue, or
green) may appear constantly on the
LCD screen. This is a structural
property of the LCD screen and is
not a malfunction.
• Do not push or scratch the front filter,
or place objects on top of this TV set.
The image may be uneven or the
LCD screen may be damaged.
• If this TV set is used in a cold place,
a smear may occur in the picture or
the picture may become dark. This
does not indicate a failure. These
phenomena disappear as the
temperature rises.
• Ghosting may occur when still
pictures are displayed continuously.
It may disappear after a few
moments.
• The screen and cabinet get warm
when this TV set is in use. This is not
a malfunction.
• The LCD screen contains a small
amount of liquid crystal. Follow your
local ordinances and regulations for
disposal.
Handling and cleaning the
screen surface/cabinet of
the TV set
Be sure to unplug the mains lead
connected to the TV set from mains
socket before cleaning.
To avoid material degradation or
screen coating degradation, observe
the following precautions.
• To remove dust from the screen
surface/cabinet, wipe gently with a
soft cloth. If dust is persistent, wipe
with a soft cloth slightly moistened
with a diluted mild detergent
solution.
• Do not spray water or detergent
directly on the TV set. It may drip to
the bottom of the screen or exterior
parts, and may cause a malfunction.
• Never use any type of abrasive pad,
alkaline/acid cleaner, scouring
powder, or volatile solvent, such as
alcohol, benzene, thinner or
insecticide. Using such materials or
maintaining prolonged contact with
rubber or vinyl materials may result
in damage to the screen surface and
cabinet material.
• Periodic vacuuming of the ventilatio n
openings is re commended to ensure
to proper ventilation.
(Continued)
11
GB
• When adjusting the angle of the TV
set, move it slowly so as to prevent
the TV set from moving or slipping off
from its table stand.
Optional Equipment
• Keep optional components or any
equipment emitting electromagnetic
radiation away from the TV set.
Otherwise picture distortion and/or
noisy sound may occur.
• This equipment has been tested and
found to comply with the limits set
out in the EMC Directive using a
connection signal cable shorter than
3 meters.
Caution about handling the
remote control
• Observe the correct polarity when
inserting batteries.
• Do not use different types of
batteries together or mix old and
new batteries.
• Dispose of batteries in an
environmentally friendly way. Certain
regions may regulate the disposal of
batteries. Please consult your local
authority.
• Handle the remote with care. Do not
drop or step on it, or spill liquid of
any kind onto it.
• Do not place the remote in a location
near a heat source, a place subject
to direct sunlight, or a damp room.
Disposal of the TV set
Disposal of Old
Electrical &
Electronic
Equipment
(Applicable in
the European
Union and other European
countries with separate
collection systems)
This symbol on the product or on its
packaging indicates that this product
shall not be treated as household
waste. Instead it shall be handed over
to the applicable collection point for
the recycling of electrical and
electronic equipm ent. By ensuring this
product is disposed of correctly, you
will help prevent potential negative
consequences for the environment
and human health, which could
otherwise be caused by inappropriate
waste handling of this product. The
recycling of materials will help to
conserve natural resources. For more
detailed information about recycling of
this product, please contact your local
Civic Office, your household waste
disposal service or the shop where
you purchased the product.
Disposal of
waste batteries
(applicable in the
European Union
and other
European
countries with separate
collection systems)
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not be
treated as household waste. On
certain batteries this symbol might be
used in combination with a chemical
symbol. The chemical symbols for
mercury (Hg) or lead (Pb) are added if
the battery contains more than
0.0005% mercury or 0.004% lead. By
ensuring these batteries are disposed
of correctly, you will help prevent
potentially negativ e consequences for
the environment and human health
which could otherwise be caused by
inappropriate waste handling of the
battery. The recycling of the materials
will help to conserve natural
resources. In case of products that for
safety, performance or data integrity
reasons require a permanent
connection with an incorporated
battery, this battery should be
replaced by qualified service staff
only. To ensure that the battery will be
treated properly, hand over the
product at end-of-life to the applicable
collection point for the recycling of
electrical and electronic equipment.
For all other batteries, please view the
section on how to remove the battery
from the product safely. Hand the
battery over to the applicable
collection point for the recycling of
waste batteries. For more detailed
information about recycling of this
product or battery, please contact
your local Civic Of fice, your household
waste disposal service or the shop
where you purchased the product.
About LCD Monitor
Temperature
When the LCD Monitor is used for an
extended period, the panel surrounds
become warm. You may feel hot when
touching there by the hand.
WARNING
Batteries must not be exposed to
excessive heat such as sunshine, fire
or the like.
12
GB
Overview of the remote
1 / – (Input select)
• In TV mode: Press to display a list of inputs.
2 SYNC MENU
Displays the menu of connected HDMI equipment. While
viewing other input screens or TV programmes, “HDMI Device
Selection” is displayed when the button is pressed.
~
• “Control for HDMI” (BRAVIA Sync) is only available with the
connected Sony equipment that has the BRAVIA Sync or BRAVIA
Theatre Sync logo or is compatible with Control for HDMI.
3 BRAVIA Sync (page 27)
./X/x/>/m/N/M
Sync-compatible equipment that is connected to the TV.
4 Coloured buttons (page 17, 19)
5 GUIDE / – EPG (Digital Electronic Programme Guide)
(page 18)
6 RETURN /
Returns to the previous screen of any displayed menu.
7 HOME (page 29)
8 DIGITAL – Digital mode (page 16)
ANALOG – Analogue mode (page 16)
9 – Screen mode (page 17)
0 Number buttons
• In TV mode: Selects channels. For channel numbers 10 and
above, press the second and third digit in quick succession.
• In Text mode: Enters the three digit page number to select the
page.
qa / – Text (page 17)
qs 2 +/– – Volume
qd % – Mute the sound
qf "/1 – TV standby
Turns the TV on and off from standby mode.
qg / – Info/Text reveal
• In digital mode: Displays brief details of the programme
currently being watched.
• In analogue mode: Displays information such as current
channel number and screen format.
• In Text mode (page 17): Reveals hidden information (e.g.
answers to a quiz).
qh F/f/G/g/
• In digital mode: Press to add channel to the empty
Favourite list or display Favourite list.
qj OPTIONS
Press to display a list that contains shortcuts to some setting
menus. The listed options vary depending on the current input
and content.
qk AUDIO
Press to change the dual sound mode (page 32).
ql SCENE – Scene Select mode (page 17)
: You can operate the BRAVIA
(Continued)
13
GB
w; – Subtitle setting
Press to change the subtitle language (page 36) (in digital mode
and USB Video mode only).
wa PROG +/–/ /
• In TV mode: Selects the next (+) or previous (-) channel.
• In Text mode (page 17): Selects the next ( ) or previous ( )
page.
ws – Previous channel
Press to return to the channel or external input that was last
viewed (for more than 15 seconds).
z
• The number 5, N, PROG + and AUDIO buttons have tactile dots. Use
the tactile dots as references when operating the TV.
14
GB
Overview of the TV buttons and indicators
1 Light sensor
Do not put anything over the sensor, doing so
may affect its function (page 41).
Remote control sensor
• Receives IR signals from the remote.
• Do not put anything over the sensor, as its
function may be affected.
2 – Picture Off / LED Timer indicator
• Lights up in green when the picture is
switched off (page 40).
• Lights up in orange when the sleep timer is
set or the TV is in photo frame mode. If you
set to “On Timer”, lights up in orange while
the TV is also in standby mode (page 39).
3 1 – Standby indicator
Lights up in red when the TV is in standby
mode.
4 " – Power indicator
Lights up in green when the TV is turned on.
5 "/1 – Power
Turns the TV on or off.
~
• To disconnect the TV completely, pull the plug
from the mains.
• When you turn on the TV, the power indicator
lights in green.
6 CH +/–/ /
• In TV mode: Selects the next (+) or previous
(-) channel.
• In TV menu: Moves through the options up
() or down ().
7 2 +/–/ /
• In TV mode: Increases (+) or decreases (-)
the volume.
• In TV menu: Moves through the options right
( ) or left ( ).
8 / – Input select / OK
• In TV mode: Selects the input source from
equipment connected to the TV sockets
(page 22).
• In TV menu: Selects the menu or option, and
confirms the setting.
9 HOME (page 29)
~
• Make sure that the TV is completely turned off
before unplugging the mains lead.
Unplugging the mains lead while the TV is
turned on may cause the indicator to remain lit
or may cause the TV to malfunction.
0 Speaker
• Outputs audio signal.
15
GB
Watching TV
Watching TV
2
3
1 Touch "/1 on the front of the TV to turn on
the TV.
When the TV is in standby mode (the 1
(standby) indicator on the TV front panel is
red), press "/1 on the remote to turn on the
TV.
2 Press DIGITAL/ANALOG to switch
between digital and analogue modes.
The channels available vary depending on
the mode.
3 Press the number buttons or PROG +/– to
select a TV channel.
To select channel numbers 10 and above
using the number buttons, press the
second and third digits in quick
succession.
To select a digital channel using the Digital
Electronic Programme Guide (EPG), see
page 18.
In digital mode
An information banner appears briefly. The
following icons may be indicated on the
banner.
: Data service (Broadcast application)
:Radio service
: Scrambled/Subscription service
: Multiple audio languages available
: Subtitles available
: Subtitles available for the hearing
impaired
: Recommended minimum age for current
programme (from 3 to 18 years)
: Parental Lock
: Digital Programme Lock
16
GB
3
Additional operations
To Do this
Adjust the volume Press 2 + (increase)/
-(decrease).
Access the
Programme index
table (in analogue
mode only)
Press . To select an
analogue channel, press F/
f, then press .
Loading...