Page 1
RattleByte Multi Region Upgrade Board
Sony
BDP-Sx200 BDP-Sx500 BDP-Sx700 BDP-S1700K
UBP-X500 UBP-X700 UBP-X700K UBP-X700M
UBP-UX70 UBP-X800 UBP-UX80 UBP-X800M2
UBP-X1000ES UBP-X1100ES
Operating Instructions
This RattleByte multi region upgrade board enables your Blu-Ray disc player to play BD-Video and
DVD-Video discs from all regions. While region free DVD playback is performed automatically, the
Blu-Ray region must be set manually using the player's original remote control. The following
operating instructions assume that the RattleByte multi region upgrade board has been fitted to the
player.
Setting the Blu-Ray region
Setting the Blu-Ray region can only be performed while the unit is in full stand-by.
Make sure that the Quick Start and/or Remote Start (if available) modes of the unit
are set to OFF!
● Press [ON/STANDBY] to turn off the unit.
● Press [YELLOW] to select Blu-Ray region A.
● Press [BLUE] to select Blu-Ray region B. This is the initial setting.
● Press [RED] to select Blu-Ray region C.
● The unit will power on automatically. BD-Video discs from the selected region can now be
played.
● Repeat the above sequence to play BD-Video discs from a different region.
www.rattlebyte.com - 1 - © 2025 RattleByte Technologies
Loading...