Sony AVD-S50ES BROCHURE

AVD-S50ES
ES DVD Player/SACD/CD Receiver
• Single Disc DVD/SACD™/CD Receiver with Progressive Scan Output
NNeeww!!
Full Digital Drive Amplifier
• Progressive Scan DVD Output
• Multi-Channel Super Audio CD Playback
• CD-R/RW, Super Audio CD (Multi), MP3 Playback
• Dolby® Digital, dts® and Dolby® Pro Logic II Decoding
• Digital Cinema Sound™ Cinema Studio EX Modes A/B/C
• DVD/CD/SACD Text
• Audio DA Converter (1 Bit)
Amplifier Section
• Full Digital Drive Amplifier
• 500 Watts Total System Power (100W x 5), 6 ohms, 20-20kHz
• Tuner with 20 FM + 10 AM Station Presets
• Preprogrammed A/V Remote Commander® Remote Control
• Play Modes (Shuffle, Program, Repeat)
• Power Save Mode
Video Section
• Component Video and S­Video Outputs
• Progressive Scan Output (480p)
• Video DA Converter (10 Bit)
• Advanced SmoothScan™ Search
• SmoothSlow Slow Motion
Inputs and Outputs
• 3 Analog Audio Inputs / 1 Output
• 2 Optical / 1 Coaxial Digital Inputs / 1 Output
• 3 S-Video Inputs / 2 Outputs
• Component Video Output
• Subwoofer Line Output
• Headphone Jack 3.5mm Mini Pin
Construction Features
• Screw Type Speaker Terminals
KEY FEATURES
ADDITIONAL FEATURES
Product Information
AVD-S50ES
ES DVD Player/SACD/CD Receiver
The Ultimate Home Theater Solution From signal to ampli-
fication, Sony has achieved a quantum leap in technology, the digi­tal handshake.Traditionally once signal is output from a SACD, DVD, or CD processing occurs in the digital domain where the sig­nal is converted back to analog to be amplified. It is within this process where noise can be introduced into the signal. However, with the new Digital Drive Amplifier the signal to amplification, the process occurs entirely in the digital domain.This allows for greater linearity, improved signal to noise ratio and lower signal distortion.
As you can see, within the chassis of the Integrated Digital A/V Component every care has been taken to isolate the components from interference and noise.
1.The Digital Signal Interface
2. Isolated DVD Drive
3. Separate Power Supply Board
4. Digital Drive Amplifier The chassis allows for complete isolation to minimize signal degra-
dation and interference.Quality without compromise.
Specifications
Amplifier Section
• Total Power Output 500W: Front:100 Watts x 2 Center: 100 Watts x 1 Surround: 100 Watts x 2 (6 Ohms, 20-20kHz, 0.7% THD)
• Analog Audio Input Sensitivity and Impedance: 150mV, 50 kohms
• Coaxial Digital Input Sensitivity and Impedance:
0.5V, 75 ohms
• Analog Audio Output Level and Impedance: 2V, 1 kohms
• Subwoofer Output Level and Impedance: 3V, 47 kohms
• Subwoofer Output Level and Impedance: 3V, 47 kohms
• CD Frequency Response: 2-20kHz ±1.0dB
• Signal-to-Noise Ratio (Video 1 Audio Connectors Only): More than 80dB
• FM Signal-to-Noise Ratio (Mono/Stereo): 73dB/71dB
• FM Alternate Channel Selectivity: 60dB
• FM Stereo Separation (1 kHz): 32dB
Video Section
• Input Sensitivity/Impedance: S-Video In(Y):1Vp-p/75 ohm S-VideoIn(C):0.286Vp-p/75 ohm
• OutputSensitivity/Impedance: S-VideoOut(Y):1Vp-p/75 ohm S-VideoOut(C): 0.286Vp­p/75 ohm
• DVD-Video Frequency Response:PCM: 2-22kHz, ±1.0dB
General
• Power Requirements: AC120V, 60Hz
• Power Consumption (in Standby): 1.5W
• Power Consumption (in Operation): 180W
Accessories
Supplied Accessories
• Instruction Manual
• AV Cable
• Remote Control
• AA Battery x 2
Weights & Measures
• Dimensions (W x H x D):
16.9" x 3.8" x 17.8"
• Weight: 9.7 lbs.
ADDITIONAL FEATURES
KEY TECHNOLOGY
Product Information
©2002 Sony Electronics Inc. All rights reserved. Features and specifications are subject to change without notice.
Loading...