Sony AITE390, AITE90V, AITE520V, AITE130V, AITE1040 Operating Instructions

...

AIT Drive

Operating Instructions

4-681-446-19(1)

AIT-5 TAPE DRIVE

AITe1040/AITe1040V

AIT-4 TAPE DRIVE

AITe520/AITe520V

AIT-3 Ex TAPE DRIVE

AITe390/AITe390V

AIT-3 TAPE DRIVE

AITe260/AITe260V

AIT-2 TAPE DRIVE

AITe130/AITe130V

AIT-1 TAPE DRIVE

AITe90/AITe90V

Safety Regulations

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to them whenever you call upon your dealer regarding this product.

Model No. Serial No. ________________________ __________________________________

Information

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Model No. for Regulatory Compliance

Your AITe1040 or AITe1040V is assigned a Model No. SDX-D1100 for regulatory compliance certifications. Your AITe520, AITe520V, AITe390, or AITe390V is assigned a Model No. ATDEA4 for regulatory compliance certifications. Your AITe260 or AITe260V is assigned a Model No.: ATDEA3 for regulatory compliance certifications. Your AITe130, AITe130V, AITe90, or AITe90V is assigned a Model No.: ATDEA2 for regulatory compliance certifications. The number is indicated on the model number label on your drive along with the rated voltage and current.

2 Safety Regulations

For the customers in the USA

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

WARNING Note: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

CAUTION

The mains plug on this equipment must be used to disconnect mains power. Please ensure that the socket outlet is installed near the equipment and shall be easily accessible.

ACHTUNG

Zur Trennung vom Netz ist der Netzstecker aus der Steckdose zu ziehen, welche sich in der Nähe des Gerätes befinden muß und leicht zugänglich sein soll.

Hinweis

Maschinenlärminformations-Verordnung - 3. GPSGV, der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779.

NOTICE

Use the power cord set approved by the appropriate testing organization for the specific countries where this unit is to be used.

HINWEIS

Zum Netzanschluß dieses Gerätes ist eine geprüfte Leitung zu verwenden. Es sind die zutreffenden nationalen Errichtungs- und/oder Gerätebestimmungen zu beachten. (Für einen Nennstrom bis 6A) Es ist eine geprüfte flexible PVC-ummantelte Leitung entsprechend IEC 60227 (H05VV-F 3G 0,75 mm2 oder H05VVH2-F 3G 0,75 mm2) zu verwenden. Andernfalls ist eine flexible Leitung aus synthetischem Gummi entsprechend IEC 60245 (Bauartkurzzeichen H05RR-F 3G 0,75 mm2) zu verwenden.

If you have any questions about this product, please refer to Sony contact in the instruction manual.

ATTENTION

According to the EU Directives related to product safety, EMC and R&TTE the manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorised Representative is Sony Deutschland GmbH, Hedelfinger Strasse 61,70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

AUFMERKSAMKEIT

Im Sinne der EU Richtlinien bezüglich Produktsicherheit, EMV und R&TTE ist Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan der Hersteller dieses Produktes. Bevollmächtigter ist Sony Deutschland GmbH, Hedelfinger Strasse 61, D-70327 Stuttgart. Für Service oder Garantieangelegenheiten wenden Sie sich bitte an die in separaten Service oder Garantiedokumenten angegebenen Adressen.

European Union Restriction of Hazardous Substances Directive compliant.

Entspricht der Richtlinie der Europäischen Union zur Beschränkung der Verwendung gefährlicher Stoffe.

Safety Regulations 3

DECLARATION OF CONFORMITY

Trade Name: SONY Model: SDX-D1100, ATDEA4, ATDEA3, ATDEA2 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo San Diego, CA.

Telephone number: 858-942-2230 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

Für Kunden in Deutschland

Diese Ausrüstung erfüllt die Europäischen EMC-Bestimmungen für die Verwendung in folgender/folgenden Umgebung(en):

– Wohngegenden – Gewerbegebiete

– Leichtindustriegebiete (Diese Ausrüstung erfüllt die Bestimmungen der Norm EN 55022, Klasse B.)

92127 U.S.A.

4 Safety Regulations

IMPORTANT SAFEGUARDS

For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference.

Carefully observe all warnings, precautions and instructions on the appliance, or described in the operating instructions and adhere to them.

USE

Power Sources – This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of electrical power, consult your dealer or local power company.

For the unit with a three-wire grounding type ac plug:

If you are unable to insert the plug into the outlet, contact your electrician to have a suitable plug installed. Do not defeat the safety purpose of the grounding plug.

AC Power cord:

The AC power cord should have appropriate safety approvals or marking for the country in which the equipment will be used. Consult your dealer or local power company.

Cleaning – Unplug the unit from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the unit.

Object and Liquid Entry – Never push objects of any kind into the unit through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.

Safety Regulations 5

INSTALLATION

Water and Moisture – Do not use power-line operated units near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.

Power-Cord Protection – Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against it, paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance.

Accessories – Do not place the unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury to a child or an adult, and serious damage to the unit. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer.

Ventilation – The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable operation of the unit, and to protect it from overheating, these slots and openings must never be blocked or covered.

• Never cover the slots and openings with a cloth or other materials.

• Never block the slots and openings by placing the unit on a bed, sofa, rug, or other similar surface.

• Never place the unit in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

SERVICE

Damage Requiring Service – Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following conditions:

• When the power cord or plug is damaged or frayed.

• If liquid has been spilled or objects have fallen into the unit.

• If the unit has been exposed to rain or water.

• If the unit has been subject to excessive shock by being dropped, or the cabinet has been damaged.

• If the unit does not operate normally when following the operating instructions. Adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to normal operation.

• When the unit exhibits a distinct change in performance - this indicates a need for service.

Servicing – Do not attempt to service the unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer to all servicing to qualified service personnel.

6 Safety Regulations

How To Use This Guide ..................................................................... 8

Part 1. Introduction

Part 2. Preparation

Part 3. Operation

Part 4. Care and Maintenance

About AIT Drives ............................................................................... 9

Features.................................................................................................. 10

Compatible Data Cartridges .................................................................. 13

System Components .............................................................................. 14

Part Names and Functions ............................................................. 15

Front Panel............................................................................................. 15

Rear Panel .............................................................................................. 16

Supplied Items................................................................................. 17

Interconnections ............................................................................. 18

SCSI ID Setting ................................................................................ 18

Option Switches (DIP Switch) ........................................................ 19

How To Use the AIT Drive ............................................................... 24

Cartridge Removal .................................................................................25

Attaching the Dust Cover ............................................................... 26

WORM Function .............................................................................. 28

Taking Care of the Drive ................................................................. 30

Safety Considerations ............................................................................30

Avoiding Damage .................................................................................. 30

Taking Care of Cartridges .............................................................. 32

Use Precautions ..................................................................................... 32

Storage Precautions ............................................................................... 32

Cleaning ........................................................................................... 33

How To Clean ........................................................................................ 33

Appendix

Specifications (AITe1040/AITe1040V) ............................................ 34

Specifications (AITe520/AITe520V) ................................................ 35

Specifications (AITe390/AITe390V) ................................................ 36

Specifications (AITe260/AITe260V) ................................................ 37

Specifications (AITe130/AITe130V) ................................................ 38

Specifications (AITe90/AITe90V) .................................................... 39

Sony Contacts ................................................................................. 40

• Sony cannot accept liability for data written to cartridges lost as a result of using this product.

• Sony bears no responsibility for any financial damages, lost profits, or claims made by third parties arising from the use of this product.

Table of Contents 7

How To Use This Guide

This Guide describes the AITe1040/AITe1040V/AITe520/AITe520V/ AITe390/AITe390V/AITe260/AITe260V/AITe130/AITe130V/AITe90/ AITe90V drive, and how to take care of it. Please read it carefully before using the unit, and keep it handy for future reference. The Guide consists of four parts, plus the specifications. Refer to the parts that relate to your use of the drive.

Part 1 describes the features of the drive, its system components, and the name and function of each part.

Part 2 describes the necessary connections between the drive and the host computer. If other SCSI devices are being used, you may need to change the SCSI ID setting. Read this part if you are installing the drive.

Part 3 describes how to use the drive, including how to turn it on, and how to insert and remove cartridges. Read this part if you are going to operate the drive.

Part 4 describes how to take care of the drive and cartridges, and how to clean the drive. Read this part before using the drive.

Appendix provides the major specifications of the AITe1040/AITe1040V/ AITe520/AITe520V/AITe390/AITe390V/AITe260/AITe260V/AITe130/ AITe130V/AITe90/AITe90V drive.

8 How to Use this Guide

Part 1. Introduction

About AIT Drives

The AITe1040/AITe1040V AIT-5 Tape Drives are external AIT drive units that use data cartridges conforming to the AIT-5 format. The AITe520/AITe520V AIT-4 Tape Drives are external AIT drive units that use data cartridges conforming to the AIT-4 format. The AITe390/AITe390V AIT-3 Ex Tape Drives are external AIT drive units that use data cartridges conforming to the AIT-3 Ex format. The AITe260/AITe260V AIT-3 Tape Drives are external AIT drive units that use data cartridges conforming to the AIT-3 format. The AITe130/AITe130V AIT-2 Tape Drives are external AIT drive units that use data cartridges conforming to the AIT-2 format. The AITe90/AITe90V AIT-1 Tape Drives are external AIT drive units that use data cartridges conforming to the AIT-1 format.

The AITe1040/AITe1040V drives support the AIT-5, AIT-4, AIT-3 Ex, and AIT-3 formats. The AITe520/AITe520V drives support the AIT-4 and AIT-3 Ex format. The AITe390/AITe390V drives support the AIT-3 Ex, AIT-3, AIT-2 Turbo, AIT-2 (Read only), AIT-1 Turbo (Read only), AIT-1 (Read only), and AIT-E Turbo (Read only) formats. The AITe260/AITe260V drives support the AIT-3, AIT-2, and AIT-1 formats. The AITe130/AITe130V drives support the AIT-2 and AIT-1 formats. The AITe90/AITe90V drives support only the AIT-1 format.

Part 1. Introduction 9

Features

The AITe1040/AITe1040V drives have the following features:

• Supports reading and writing to data cartridges conforming to the AIT-5, AIT-4, AIT-3 Ex, and AIT-3 formats.

• Data compression provides 1,040 gigabytes of storage on SDX5-400C data cartridges.

The native capacity is 400 gigabytes of storage on SDX5-400C data cartridges.

• Ultra 160 SCSI interface is fully supported for host computer access.

• Fragment rewrite function (AIT-5, AIT-4, AIT-3 Ex)

• Frame rewrite function (AIT-3)

The AITe520/AITe520V drives have the following features:

• Supports reading and writing to data cartridges conforming to the AIT-4 and AIT-3 Ex formats.

• Data compression provides 520 gigabytes of storage on SDX4-200C data cartridges.

The native capacity is 200 gigabytes of storage on SDX4-200C data cartridges.

• Ultra 160 SCSI interface is fully supported for host computer access.

• Fragment rewrite function

This is assuming 2.6 : 1 compression ratio. The degree of data compression attained while recording data varies according to system environment and data type.

10 Part 1. Introduction

The AITe390/AITe390V drives have the following features:

• Supports reading and writing to data cartridges conforming to the AIT-3 Ex, AIT-3, and AIT-2 Turbo formats.

• Supports reading from data cartridges conforming to the AIT-2, AIT-1 Turbo, AIT-1, and AIT-E Turbo formats.

• Data compression provides 390 gigabytes of storage on SDX3X-150C data cartridges.

The native capacity is 150 gigabytes of storage on SDX3X-150C data cartridges.

• Ultra 160 SCSI interface is fully supported for host computer access.

• Fragment rewrite function (AIT-3 Ex)

• Frame rewrite function (AIT-3)

The AITe260/AITe260V drives have the following features:

• Supports reading and writing to data cartridges conforming to the AIT-3, AIT-2, and AIT-1 formats.

• Data compression provides 260 gigabytes of storage on SDX3-100C data cartridges.

The native capacity is 100 gigabytes of storage on SDX3-100C data cartridges.

• Ultra 160 SCSI interface is fully supported for host computer access.

• Frame rewrite function

This is assuming 2.6 : 1 compression ratio. The degree of data compression attained while recording data varies according to system environment and data type.

Part 1. Introduction 11

The AITe130/AITe130V drives have the following features:

• Supports reading and writing to data cartridges conforming to the AIT-2 and AIT-1 formats.

• Data compression provides 130 gigabytes of storage on SDX2-50C data cartridges.

The native capacity is 50 gigabytes of storage on SDX2-50C data cartridges.

•Wide Ultra SCSI (LVD/SE) interface is fully supported for host computer access.

• Frame rewrite function

The AITe90/AITe90V drives have the following features:

• Supports reading and writing to data cartridges conforming to the AIT-1 format.

• Data compression provides 91 gigabytes of storage on SDX1-35C data cartridges.

The native capacity is 35 gigabytes of storage on SDX1-35C data cartridges.

•Wide Ultra SCSI (LVD/SE) interface is fully supported for host computer access.

• Frame rewrite function

This is assuming 2.6 : 1 compression ratio. The degree of data compression attained while recording data varies according to system environment and data type.

12 Part 1. Introduction

Compatible Data Cartridges

The AITe1040/AITe1040V drives can be used with data cartridges marked with the AIT-5, AIT-4, AIT-3 Ex, or AIT-3 logo. The AITe520/AITe520V drives can be used with data cartridges marked with the AIT-4 or AIT-3 Ex logo. The AITe390/AITe390V drives can be used with data cartridges marked with the AIT-3 Ex, AIT-3, AIT-2 Turbo, AIT-2 (read only), AIT-1 Turbo (read only), AIT-1 (read only), or AIT-E Turbo (read only) logo. The AITe260/AITe260V drives can be used with data cartridges marked with the AIT-3, AIT-2, or AIT-1 logo. The AITe130/AITe130V drives can be used with data cartridges marked with the AIT-2 or AIT-1 logo. The AITe90/AITe90V drives can be used with data cartridges marked with the AIT-1 logo.

AIT-E Turbo LOGO AIT-1 LOGO AIT-1 Turbo LOGO

AIT-2 LOGO AIT-2 Turbo LOGO AIT-3 LOGO

AIT-3 Ex LOGO AIT-4 LOGO AIT-5 LOGO

Caution

• Do not use cartridges other than the ones described above with this drive. Be sure to use only the cartridges designed specifically for AIT.

• Do not use anything but AIT cartridges with this drive, as doing so can damage the drive. Although commercially available 8 mm videotapes resemble AIT cartridges in appearance, they have entirely different specifications and cannot be used.

Part 1. Introduction 13

+ 29 hidden pages