Draft for Sony Ericsson Internal Use Only
Turning on the phone
To turn on the phone
1 Press and hold down .
2Enter your SIM card PIN, if requested and select OK.
3 Select a language.
4Select Yes to use the setup wizard while settings are downloaded.
If you want to correct a mistake when you enter your PIN, press .
SIM card
The SIM (Subscriber Identity Module) card, which you get from your network operator, contains information about your subscription. Always turn off your phone and detach the charger before you insert or remove the SIM card.
You can save contacts on the SIM card before you remove it from your phone. See To copy names and numbers to the SIM card on page 19.
PIN
You may need a PIN (Personal Identification Number) to activate the services in your phone. Your PIN is supplied by your network operator. Each PIN digit appears as *, unless it starts with emergency number digits, for example, 112 or 911. You can see and call an emergency number without entering a PIN.
If you enter the wrong PIN three times in a row, the SIM card is blocked. See SIM card lock on page 64.
Startup screen
The startup screen appears when you turn your phone on. See Using pictures on page 39.
Getting started |
6 |
Draft for Sony Ericsson Internal Use Only
Standby
After you have turned your phone on and entered your PIN, the name of the network operator appears. This view is called standby.
Help in your phone
Help and information are available in your phone. See Navigation on page 12.
To use the setup wizard
1From standby select Menu > Settings
> the General tab > Setup wizard.
2 Select an option.
To view information about functions
•Scroll to a function and select Info, if available. In some cases, Info appears under Options.
To view the phone demonstration
•From standby select Menu >
Entertainment > Demo tour.
To view status information
•From standby press the volume key.
Charging the battery
The phone battery is partly charged when you buy it.
To charge the battery
2.5 h.
1Connect the charger to the phone. It takes approximately 2.5 hours to fully charge the battery. Press a key to view the screen.
2Remove the charger by tilting the plug upwards.
You can use your phone while it is charging. You can charge the battery at any time and for more or less than 2.5 hours. You can interrupt the charging without damaging the battery.
7Getting started