GSM 900/1800/1900
This User guide is published by Sony Ericsson Mobile
Communications AB or its local affiliated company,
without any warranty. Improvements and changes
to this User guide necessitated by typographical
errors, inaccuracies of current information, or
improvements to programs and/or equipment,
may be made by Sony Ericsson Mobile
Communications AB at any time and without notice.
Such changes will, however, be incorporated into
new editions of this User guide.
All rights reserved.
Publication number: 1210-7336.2
Please note:
Some of the services in this User guide are not
supported by all networks. This also applies to the GSM International Emergency Number 112.
Please contact your network operator or service
provider if you are in doubt whether you can use
a particular service or not.
Please read the Guidelines for safe and efficient use
and the Limited warranty chapters before you use
your mobile phone.
Your mobile phone has the capabi lity to download,
store and forward additional content, e.g. ringtones.
The use of such content may be restricted or
prohibited by rights of third parties, i ncluding but
not limited to restriction under applicable copyright
laws. You, and not Sony Ericsson, are entirely
responsible for additional content that you download
to or forward from your mobile phone . Prior to your
use of any additional content, please verify that your
intended use is properly licensed or is otherwise
authorized. Sony Ericsson does not guarantee the
accuracy, integrity or quality of any additional content
or any other third party content. Under no
circumstances will Sony Ericsson be liable in any
way for your improper use of additional content or
other third party content.
Smart-Fit Rendering is a trademark or a registered
trademark of ACCESS Co., Ltd.
Bluetooth is a trademark or a registered trademark
of Bluetooth SIG Inc. and any use of such mark by
Sony Ericsson is under license.
The Liquid Identity logo, PlayNow, MusicDJ,
PhotoDJ , TrackID and VideoDJ are trademarks
or registered trademarks of Sony Ericsson Mobile
Communications AB.
TrackID™ is powered by Gracenote Mobile
MusicID ™. Gracenote and Gracenote Mobile
MusicID are trademarks or registered trademarks
of Gracenote, Inc.
Sony, Memory Stick Micro™ and M2™ are
trademarks or registered trademarks of Sony
Corporation.
SyncML is a trademark or registered trademark
of Open Mobile Alliance LTD.
Ericsson is a trademark or registered trademark
of Telefonaktiebolaget LM Ericsson.
Adobe Photoshop Album Starter Edition is either
a trademark or registered trademark of Adobe
Systems Incorporated in the United States and/or
other countries/regions.
Microsoft, ActiveSync, Windows, Outlook, and Vista
are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or
other countries/regions.
T9™ Text Input is a trademark or a registered
trademark of Tegic Communications. T9™ Text
Input is licensed under one or more of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480,
5,945,928, and 6,011,554; Canadian Pat. No.
1,331,057, United Kingdom Pat. No. 2238414B;
Hong Kong Standard Pat. No. HK0940329; Repu blic
of Singapore Pat. No. 51383; Euro.Pat. No. 0 842
463(96927260.8) DE/DK, FI, FR, IT, NL, PT, ES, SE,
GB; and additional patents are pending worldwide.
Java and all Java based trademarks and logos
are trademarks or register ed trademarks of Sun
Microsystems, Inc. in the U.S. and other countries/
regions.
End-user license agreement for Sun™ Java™
J2ME™.
Restrictions: Software is confidential copyrighted
information of Sun and title to all copies is retained
by Sun and/or its licensors. Customer shall not
modify, decompile, disassemble, decrypt, extract,
or otherwise reverse engineer Software. Software
may not be leased, assigned, or sublicensed, in
whole or in part.
Export Regulations: This product, including
any software or technical data contained in or
accompanying the product, may be subject to
U.S. export control laws, including the U.S. Export
Administration Act and its associated regulations
and the U.S. sanctions programs administered by
the U.S. Treasury Department’s Office of Foreign
Assets Control, and may be additionally subject
to export or import regulations in other countries/
regions. The user and any possessor of the product
agrees to comply strictly with all such regulations
and acknowledges that it is their responsibility to
obtain any required licenses to export, re-export, or
import this product. Without limitation this product,
including any software contained therein, may not
be downloaded, or otherwise exported or re-exported
(i) into, or to a national or resident of, or an entity in,
Cuba, Iraq, Iran, North Korea, Sudan, Syria (as such
listing may be revised from time to time) or any
country/region to which the U.S. has embargoed
goods; or (ii) to any person or entity on the U.S.
Treasury Department’s list of Specially Designated
Nationals or (iii) any person or entity on any other
export prohibition list that may be maintained from
time to time by the United States Government,
including but not limited to the U.S. Commerce
Department’s Denied Persons List or Entity List,
or the U.S. State Department’s Nonproliferation
Sanctions List.
Restricted Rights: Use, duplication or disclosure
by the United States government is subject to the
restrictions as set forth in the Rights in Technical
Data and Computer Software Clauses in DFARS
252.227-7013(c) (1) (ii) and FAR 52.227-19(c) (2)
as applicable.
This product is protected by certain intellectual
property rights of Microsoft. Use or distribution of
such technology outside of this product is prohibited
without a license from Microsoft.
Content owners use Windows Media digital rights
management technology (WMDRM) to protect their
intellectual property, including copyrights. This device
uses WMDRM software to access WMDRMprotected content. If the WMDRM software fails
to protect the content, content owners may ask
Microsoft to revoke the software’s ability to use
WMDRM to play or copy protected content.
Revocation does not affect unprotected content.
When you download licenses for protected content,
you agree that Microsoft may include a revocation
list with the licenses. Content owners may require
you to upgrade WMDRM to access their content. If
you decline an upgrade, you will not be able to access
content that requires the upgrade.
With respect to a Licensee offering MPEG-4 Video
Decoders and/or Encoders the following notice shall
be given: This product is licensed under the MPEG4 visual patent portfolio license for th e personal and
non-commercial use of a consumer for (i) encoding
video in compliance with the MPEG-4 visual standard
(“MPEG-4 video”) and/or (ii) decoding MPEG-4 video
that was encoded by a consumer engaged in a
personal and non-commercial activity and/or was
obtained from a video provider licensed by MPEG
LA to provide MPEG-4 video. No license is granted
or shall be implied for any other use. Additional
information including that relating to promotional,
internal and commercial uses and licensing may
be obtained from MPEG LA, LLC. See
http://www.mpegla.com.
Notice Required for the License Granted under
Articles 2.1 and 2.6. As a condition to the licenses
granted pursuant to Articles 2.1 a nd 2.6 hereof,
Licensee agrees to provide to any party that receives
from Licensee an AVC Royalty Product the following
notice: This product is licensed under the AVC patent
portfolio license for the personal and non-commercial
use of a consumer to (i) encode video in compliance
with the AVC standard (“AVC video”) and/or (ii)
decode AVC video that was encoded by a consumer
engaged in a personal and non-commercial ac tivity
and/or was obtained from a video was obtained from
a video provider licensed to provide AVC video. No
license is granted or shall be implied for any other
use. Additional information may be obtaine d from
MPEG LA, L.L.C. See http://www.mpegla.com.
MPEG Layer-3 audio decoding technology licensed
from Fraunhofer IIS and Thomson.
Other product and company names mentioned
herein may be the trademarks of their respective
owners.
Any rights not expressly granted he rein are reserved.
Note: Sony Ericsson advises users to backup their
personal data information.
All illustrations are for illustration only and may not
accurately depict the actual phone.
Some products may display a 17-digit number
when you press *#06#. The first 15 digits are the
IMEI number, and the last 2 digits are software
update number.
Instruction symbols
These symbols may appear in the User
guide.
Note
Tip
Warning
A service or function is networkor subscription-dependent.
Contact your network operator
for details.
> Use a selection or navigation
key to scroll and select. See
Navigation on page 14.
1 Press and hold down .
2 Enter your SIM card PIN, if requested
and select OK.
3 Select a language.
4 Select Yes to use the setup wizard.
If you want to correct a mistake when
you enter your PIN, press .
SIM card
The SIM (Subscriber Identity Module)
card, which you get from your network
operator, contains information about
your subscription. Always turn off your
phone and detach the charger before
you insert or remove the SIM card.
You can save contacts on the SIM card
before you remove it from your phone.
See To copy names and numbers to the
SIM card on page 25.
PIN
You may need a PIN (Personal
Identification Number) to activate the
services in your phone. Your PIN is
supplied by your network operator.
Each PIN digit appears as *, unless it
starts with emergency number digits,
for example, 112 or 911. You can see
and call an emergency number without
entering a PIN.
If you enter the wrong PIN three times in
a row, the SIM card is blocked. See SIM
card lock on page 67.
Startup screen
The startup screen appears when you
turn your phone on. See Using pictures
on page 44.
Standby
After you have turned your phone on
and entered your PIN, the name of the
network operator appears. This view is
called standby.
Help and information are available in
your phone. See Navigation on page 14.
To use the setup wizard
1 From standby select Menu > Settings
> the General tab > Setup wizard.
2 Select an option.
To view information about functions
• Scroll to a function and select Info, if
available. In some cases, Info appears
under Options.
To view the phone demonstration
• From standby select Menu >
Entertainment > Demo tour.
To view status information
• From standby press the volume key.
Charge the battery
Your phone battery is partly charged
when you buy it.
It may take 30 minutes for the battery
icon to appear on the screen.
Using the USB charger
To connect the charger and charge
the battery (The illustrations are for
guidance only and may not accurately
depict the actual phone)
1 Connect the USB cable (you can get
instruction for three conditions from
Note) plug to the AC adapter USB
socket, as shown in the above
illustration. The USB cable is supplied
with your phone.
2 Connect the USB cable connector to
your phone. Press a key to view the
charging status on the screen. It takes
approximately 2.5 hours to fully charge
the battery.
(USB cable for charging and USB
cable for data transferring. See the
illustrations as below), then the USB
cable for charging is only intended for
charging your phone. Do not use it for
transferring data.
The USB cable for the USB charger is
only intended for connection to the AC
adapter to charge your phone. It must
not be used for connection to a PC.
It can only be used for charging your
phone. Never use it for charging
accessories.
USB cable for charging
USB cable for transferr ing
2 If there is only one USB cable in the
kit, it is intended for charging your
phone as well as transferring data.
3 If there is only one USB cable for the
USB charger in the phone kit, this USB
cable is only intended for charging your
phone.
4 Sony Ericsson strongly recommends
that you use only Sony Ericsson
branded original batteries, the part
of power supply device in accordance
with YD/T 1591-2006 specifications
of Communications Industry Standards
of P. R. China and the USB cable
supplied with your phone to charge
the phone. The use of third-party
products may decrease the
performance of your phone and/or
pose a risk to your health or safety.
You can charge the battery for more or
less than 2.5 hours. Interrupted charging
will not damage the battery.
Performance depends on temperatures,
signal strenth, usage patterns, features
selected and voice or data transmissions.
The stand-by time for this battery is up
to xxx hours.
Use only Sony Ericsson branded original
batteries intended for use with your
mobile phone. If you use other batteries
you may not be able to charge your phone.
Profiles
Time & date
Language
Update service
Voice control
New events
Shortcuts
Flight mode
Security
Setup wizard
Phone status
Master reset
* Some menus are operator-, network- and subscription-dependent.
** You can use the navigation key to scroll between tabs in submenus. For more information, see Navigation
on page 14.
Sounds & alerts
Ring volume
Ringtone
Silent mode
Increasing ring
Vibrating alert
Message alert
Key sound
2 Scroll to an option and select Edit.
3 Scroll to a menu option and select
Shortc.
Activity menu
The activity menu gives you quick
access to certain functions.
To open the activity menu
• Press .
Activity menu tabs
• New events – missed calls and new
messages.
• Running apps – applications that are
running in the background.
• My shortcuts – add your favourite
functions to access them quickly.
• Internet – quick access to the Internet.
File manager
You can use the file manager to handle
files saved in the phone memory or on
a memory card.
You may have to purchase a memory card
separately.
Memory card
Your phone supports Memory Stick
Micro™ (M2™) memory card adding
more storage space to your phone.
It can also be used as a portable
memory card with other compatible
devices.
To insert a memory card
1 Open the battery cover.
2 Insert the memory card with the
You can move and copy files between
your phone, a computer and a memory
card. Files are saved on the memory
card first and then in the phone memory.
Unrecognized files are saved in the
Other folder.
You can create subfolders to move or
copy files to. You can select more than
one or all the files in a folder at the same
time for all folders except Games and
Applications.
If the memory is full, delete some
content to create space.
File manager tabs
The file manager is divided into three
tabs, and icons indicate where the files
are saved.
2 Scroll to a folder and select Open.
3 Select Options > Mark > Mark several.
4 For each file you want to mark, scroll
to the file and select Mark.
To delete a file from the file manager
1 From standby select Menu > Organizer
> File manager.
2 Find the file and press .
Phone language
You can select a language to use in your
phone.
To change the phone language
1 From standby select Menu > Settings
> the General tab > Language > Phone
language.
2 Select an option.
Entering text
You can use multitap text input or T9™
Text Input to enter text. The T9 Text
Input method uses a built-in dictionary.
To change text input method
• When you enter text, press and hold
down .
To shift between capitals and
lower-case letters
• When you enter text, press .
To enter numbers
• When you enter text, press and hold
down – .
To enter full stops and commas
• When you enter text, press .
To enter text using T9™ Text Input
1 From standby select, for example,
Menu > Messaging > Write new > Text
message.
2 If is not displayed, press and hold
down to change to T9 Text Input.
3 Press each key only once, even if the
letter you want is not the first letter on
the key. For example, to write the word
“Jane”, press , , , .
Write the whole word before looking at
the suggestions.
4 Use or to view suggestions.
5 Press to accept a suggestion.
Multitap input only applies when Latin
characters are selected as writing
languages.
To add words to the built-in dictionary
1 When you enter text using T9 Text Input,
select Options > Spell word.
2 Write the word using multitap input and
select Insert.
Chinese input
This mobile phone has different input
methods for entering Chinese
characters:
• Stroke input
• Pinyin input
You can use these methods, for
example, to enter Chinese names
and Chinese short messages.
Switching between Chinese input
methods
In the Chinese editing mode, you can
select and switch quickly to another
input method by pressing and holding
.
General instructions
Regardless of which input method you
choose, your phone has a function to
speed up the entry of Chinese
characters. Whenever you enter a stroke
or a Pinyin letter, a candidate row of
the most frequently used characters
containing that stroke or relating to that
letter appears at the bottom of the
screen.
If the character you want is not
displayed in the candidate row, press
to present another candidate row.
Continue pressing until the character
you want is displayed. Alternatively,
you can enter the next stroke or Pinyin
letter and a new set of characters will
immediately be displayed in the
candidate row. To go back to the
previous row, press . To select
a character in the candidate row, press
the navigation key or press and hold
the key corresponding to the number
above the character you want to enter.
A Chinese character is built up of
strokes. There are more than 30 basic
strokes, which are grouped into 5 stroke
categories. Each category is
represented on the keypad by one of
the keys – . The Wild Card
key , is used when you are not sure
of which stroke to use.
Stroke categories
The 5 stroke categories are defined in
the table below:
The basic building units of Chinese
characters are components that are
made up of strokes. After entering the
first two strokes of the desired character,
the component and character
candidates that started with that stroke
are displayed in the candidate row.
Using components is a fast method for
entering complex characters.
The smaller candidates surrounded by
dotted frames are components, and the
bigger candidates without dotted frames
are characters.
For example, to enter “
信息
”
1 Enter “ ”, “ ” and “ ”.
2 Move the cursor to “ 信 ”, press .
Move the cursor to “ 息 ”, press
again to select “ 息 ”.
Example of using the wild card key
The wild card key , is used to
supplement unclear strokes in entering
characters. If you want to enter “ 互 ”,
but you only know that “一 ” is the first
and the last stroke of the character and
that the total number of strokes is four,
enter , , , . The
character is displayed in the
candidate row.
Press the keys containing the required
Pinyin letters, and the phone will make
various proposals on the screen,
according to the pronunciation rules
of Mandarin.
Below is the key mapping of Pinyin
letters on the keypad.
Number Key Pinyin Letter
a b c
d e f
g h i
j k l
m n o
p q r s
t u ü
w x y z
On the keypad, the letter ü is replaced
by v.
For example, to enter “
信息
”
1 Press , , .
2 When “xin” is highlighted, press
or and select “ 信 ”, then press .
(If you want to enter any of the other
suggested Pinyin combinations, scroll
up or down to the desired combination,
then press ).
3 Press again to select “ 息 ”, when
“ 息 ” is highlighted.
Fuzzy Pinyin
Fuzzy Pinyin is an option for the Pinyin
input method, which contains additional
spelling alternatives.
When in Pinyin input mode, press
Options > Writing language > Fuzzy
Pinyin> On.
Input punctuation, symbols and
smilies
Under any Chinese input mode, press
, to see the table of punctuation
marks, symbols and smilies. Use the
navigation key to make a selection.
Press to enter a space into the
text.
You need to turn on your phone and
be within range of a network.
To make a call
1 From standby enter a phone number
(with international country/region code
and area code, if applicable).
2 Press .
You can call numbers from your contacts
and call list. See Contacts on page 23,
and Call list on page 28. You can also use
your voice to make calls. See Voice
control on page 29.
To end a call
• Press .
To make international calls
1 From standby press and hold down
until a “+” sign appears.
2 Enter the country/region code, area
code (without the first zero) and phone
number.
3 Press .
To re-dial a number
• When Retry? appears select Yes.
Do not hold your phone to your ear when
waiting. When the call connects, your
phone gives a loud signal.
To answer a call
• Press .
To reject a call
• Press .
To change the ear speaker volume
during a call
• Press the volume key up or down.
To mute the microphone during a call
1 Press and hold down .
2 Press and hold down again
to resume.
To turn the loudspeaker on during
a call
• Select SpkrOn.
Do not hold your phone to your ear when
using the loudspeaker. This could damage
your hearing.
Your phone supports international
emergency numbers, for example, 112
and 911. These numbers can normally
be used to make emergency calls in
any country/region, with or without the
SIM card inserted, if a GSM network is
within range.
In some countries/regions, other
emergency numbers may also be
promoted. Your network operator may
therefore have saved additional local
emergency numbers on the SIM card.
To make an emergency call
• From standby enter 112 (the
international emergency number)
and press .
To view your local emergency
numbers
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Special numbers >
Emergency nos.
Contacts
You can save names, phone numbers
and personal information in Contacts.
Information can be saved in the phone
memory or on the SIM card.
Default contacts
You can choose which contact
information is shown as default.
If Phone contacts is selected as default,
your contacts show all the information
saved in Contacts. If you select SIM
contacts as default, your contacts show
names and numbers saved on the SIM
card.
To select default contacts
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Default contacts.
3 Select an option.
Phone contacts
Phone contacts can contain names,
phone numbers and personal
information. They are saved in the
phone memory.
To add a phone contact
1 From standby select Menu > Contacts.
2 Scroll to New contact and select Add.
3 Enter the name and select OK.
4 Enter the number and select OK.
5 Select a number option.
6 Scroll between tabs and select the fields
Note: Phone supports Chinese and
English contacts mixed search. When
a contact is written in Latin characters,
the entered letter can reach the Latin
contact you want to call; when a contact
is written in Chinese characters, the
entered letter can reach the pinyin of
Chinese contact you want to call.
To go directly to a contact, from standby
press and hold down
To call a SIM contact from phone
contacts
– .
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > SIM contacts.
3 Scroll to a contact and press .
To call with Smart search
1 From standby press – to
enter a sequence of (at least two) digits.
All entries which match the sequence
of digits or corresponding letters are
shown in a list.
2 Scroll to a contact or a phone number
and press .
To turn Smart search on or off
1 From standby select Menu > Settings
> the Calls tab > Smart search.
2 Select an option.
Editing contacts
To add information to a phone contact
1 From standby select Menu > Contacts.
2 Scroll to a contact and select Options
> Edit contact.
3 Scroll between the tabs and select Add.
4 Select an option and an item to add.
5 Select Save.
If your subscription supports Calling Line
Identification (CLI) service, you can assign
personal ringtones to contacts.
To copy names and numbers to phone
contacts
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Copy from SIM.
3 Select an option.
To copy names and numbers to the
SIM card
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Copy to SIM.
3 Select an option.
When you copy all contacts from your
phone to the SIM card, all existing SIM
card information is replaced.
To automatically save names and
phone numbers on the SIM card
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Auto save
on SIM.
3 Select an option.
To save contacts on a memory card
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Back up to
m. card.
SIM contacts
SIM contacts can contain names and
numbers only. They are saved on the
SIM card.
To add a SIM contact
1 From standby select Menu > Contacts.
2 Scroll to New contact and select Add.
3 Enter the name and select OK.
4 Enter the number and select OK.
5 Select a number option and add more
information, if available.
6 Select Save.
To call a SIM contact
1 From standby select Menu > Contacts.
2 Scroll to a contact and press .
Deleting contacts
To delete a contact
1 From standby select Menu > Contacts.
2 Scroll to a contact and press .
To delete all phone contacts
1 From standby select Menu > Contacts.
2 Scroll to
New contact and select
Options > Advanced > Delete all
contacts.
Sending contacts
To send a contact
1 From standby select Menu > Contacts.
2 Scroll to a contact and select Options
> Send contact.
3 Select a transfer method.
Make sure the receiving device supports
the transfer method you select.
Sorting contacts
To select the sort order for contacts
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Sort order.
3 Select an option.
Memory status
The number of contacts you can save
in your phone or on the SIM card
depends on available memory.
select a contact. If the contact has more
than one number, select the number to
add the voice command to.
3 Record a voice command such as
“John mobile”.
4 Follow the instructions that appear. Wait
for the tone and say the command to
record. The voice command is played
back to you.
5 If the recording sounds OK, select Yes.
If not, select No and repeat steps 3
and 4.
Voice commands are saved in the phone
memory only. They cannot be used in
another phone.
To re-record a voice command
1 From standby select Menu > Settings >
the General tab > Voice control > Voice
dialling > Edit names.
2 Scroll to a command and select Options
> Replace voice.
3 Wait for the tone and say the command.
Voice dialling
You can hear your recorded contact
name when you receive a call from that
contact.
To voice dial
1 From standby press and hold down
a volume key.
2 Wait for the tone and say a recorded
name, for example “John mobile”. The
name is played back to you and the call
is connected.
The magic word
You can record and use a voice
command as a magic word to activate
voice dialling without pressing any keys.
Your handsfree must be connected to
your phone when using the magic word.
You should choose a long, unusual word
or phrase that can easily be distinguished
from ordinary background speech.
Bluetooth handsfree does not support
this feature.
2 Select a call type and a divert option.
3 Select Activate.
4 Enter the number to divert calls to and
select OK.
More than one call
You can handle more than one call at
a time. For example, you can put an
ongoing call on hold, while you make
or answer a second call. You can also
switch between the two calls. You
cannot answer a third call without
ending one of the first two calls.
Call waiting
When call waiting is used, you hear
a beep if you receive a second call.
To activate call waiting
• From standby select Menu > Settings
> the Calls tab > Manage calls > Call
waiting > Activate.
To make a second call
1 During the call, select Options > Hold
call. This puts the ongoing call on hold.
2 Select Options > Add call.
3 Enter the number to call and press .
To answer a second call
• During the call, press . This puts the
ongoing call on hold.
To reject a second call
• During the call, press and continue
with the ongoing call.
To end an ongoing call and answer
a second call
• During the call, select Replace active
call.
Handling two voice calls
You can have calls ongoing and on hold
at the same time.
To switch between two calls
• During the call, press .
To join two calls
• During the call, select Options > Join
calls.
To connect two calls
• During the call, select Options >
Transfer call. You are disconnected
from both calls (operator dependent).
To end an ongoing call and return to
the call on hold
You can restrict outgoing and incoming
calls. A password from your service
provider is required.
If you divert incoming calls, you cannot
use some restrict calls options.
Restrict calls options
Standard options are:
• All outgoing – all outgoing calls
• Outgoing intl – all outgoing
international calls
• Outgoing intl roam. – all outgoing
international calls except to your
home country/region
• All incoming – all incoming calls
• Inc. when roaming – all incoming
calls when you are abroad
To restrict calls
1 From standby select Menu > Settings >
the Calls tab > Manage calls > Restrict
calls.
2 Select an option.
3 Select Activate.
4 Enter your password and select OK.
Fixed dialling
Fixed dialling allows calls to be made
only to certain numbers saved on the
SIM card. The fixed numbers are
protected by your PIN2.
Partial numbers can be saved. For
example, saving 0123456 allows calls
to be made to all numbers starting with
0123456.
When fixed dialling is used, you cannot
view or manage any phone numbers saved
on the SIM card, but you can still call the
international emergency number, 112.
To use fixed dialling
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Special numbers > Fixed
dialling > Activate.
3 Enter your PIN2 and select OK.
4 Select OK again to confirm.
To save a fixed number
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Special numbers > Fixed
dialling > Fixed numbers > New number.
During a call, the duration of the call is
shown. You can check the duration of
your last call, outgoing calls and the
total time of your calls.
To check the call time
• From standby select Menu > Settings
> the Calls tab > Time & cost > Call
timers.
Showing or hiding your phone
number
You can decide to show or hide your
phone number when you make a call.
To hide your phone number
1 From standby select Menu > Settings
> the Calls tab > Show/hide my no.
2 Select Hide number.
Messaging
Receiving and saving messages
You are notified when you receive a
message. Messages are automatically
saved in the phone memory. When the
phone memory is full, you can delete
messages or save them on a memory
card or on the SIM card.
Text messages can contain simple
pictures, sound effects, animations,
and melodies.
Before you use messaging
You must have a service centre number.
The number is supplied by your service
provider and is usually saved on the SIM
card. If the number to your service
centre is not saved on your SIM card,
you must enter the number yourself.
To enter a service centre number
1 From standby select Menu > Messaging
> Settings > Text message and scroll to
Service centre. The number is shown if
it is saved on the SIM card.
2 If there is no number shown, select Edit.
3 Scroll to New ServiceCentre and select
Add.
4 Enter the number, including the
international “+” sign and country/region
code.
5 Select Save.
To write and send a text message
1 From standby select Menu > Messaging
> Write new > Text message.
2 Write the message and select Cont. >
Contacts look-up.
3 Select a recipient and select Send.
If you send a text message to a group, you
will be charged for each member. See
Groups on page 27.
Picture messages can contain text,
pictures, slides, sound recordings, video
clips, signatures and attachments. You
can send picture messages to a mobile
phone or an email address.
Before you use picture messaging
You must set an MMS profile and the
address of your message server. If no
MMS profile or message server exists,
you can receive all the settings
automatically from your network
operator or at
www.sonyericsson.com/support.
To select an MMS profile
1 From standby select Menu > Messaging
> Settings > Picture message > MMS
profile.
2 Select a profile.
To set the message server address
1 From standby select Menu > Messaging
> Settings > Picture message.
2 Scroll to MMS profile and select Edit.
3 Select Options > Edit.
4 Scroll to Message server and select
Edit.
5 Enter the address and select OK > Save.
To create and send a picture message
1 From standby select Menu > Messaging
> Write new > Picture msg.
2 Enter text. To add items to the message,
press , scroll and select an item.
3 Select Cont. > Contacts look-up.
4 Select a recipient and select Send.
Receiving picture messages
You can select how to download your
picture messages. Standard options
when you download picture
messages are:
You can use standard email functions
and your computer email address in
your phone.
Before you use email
You can use the setup wizard to check
if settings are available for your email
account or you can enter them manually.
You can also receive settings at
www.sonyericsson.com/support.
To create an email account
1 From standby select Menu > Messaging
> Email > Accounts.
2 Scroll to New account and select Add.
If you enter settings manually, you can
contact your email provider for more
information. An email provider could be
the company that supplied your email
address.
To write and send an email message
1 From standby select Menu > Messaging
> Email > Write new.
2 Select Add > Enter email address. Enter
the email address and select OK.
3 To add more recipients, scroll to To:
and select Edit.
4 Scroll to an option and select Add >
Enter email address. Enter the email
address and select OK. When you are
ready, select Done.
5 Select Edit and enter a subject.
Select OK.
6 Select Edit and enter the text.
Select OK.
7 Scroll to Attachments and select a file
to attach.
8 Select Cont. > Send.
To receive and read an email message
1 From standby select Menu > Messaging
> Email >
Inbox > Options > Check new
email.
2 Scroll to the message and select View.
To save an email message
1 From standby select Menu > Messaging
> Email > Inbox.
2 Scroll to the message and select View
> Options > Save message.
To reply to an email message
1 From standby select Menu > Messaging
> Email > Inbox.
2 Scroll to the message and select
Options > Reply.
3 Write the reply and select OK.
4 Select Cont. > Send.
2 Scroll to a contact and select Chat.
3 Write the message and select Send.
Status
You can show your status, for example,
Happy or Busy, to your contacts only.
You can also show your status to all
users on the My friends server.
To show my status
1 From standby select Menu > Messaging
> My friends > Options > Settings >
Show my status.
2
Select an option.
To update your own status
1 From standby select Menu > Messaging
> My friends > the My status tab.
2 Edit the information.
3 Select Options > Save.
Chat group
A chat group can be started by your
service provider, by an individual My
friends user or by yourself. You can
save chat groups by saving a chat
invitation or by searching for a specific
chat group.
You can use Bluetooth™ wireless
technology and a USB cable to transfer
pictures and video clips between your
computer and phone. See Bluetooth™
wireless technology on page 56 and
Using a USB cable on page 58 for more
information.
You can view, enhance and organize
your pictures and video clips on your
computer by installing the Adobe™ Photoshop™ Album Starter Edition
or the Sony Ericsson Media Manager.
These are available for download at
www.sonyericsson.com/support.
To send a picture or video clip
1 From standby select Menu > Media.
2 Scroll to an item and select Options
> Send.
3 Select a transfer method.
Make sure the receiving device supports
the transfer method you select.
To receive a picture or video clip
• Follow the instructions that appear.
Camera printing
You can print camera pictures using a
USB cable connected to a compatible
printer.
You can also print using a Bluetooth
compatible printer.
To print camera pictures using a USB
cable
1 From standby select Menu > Media and
scroll to Photo > Camera album.
2 Scroll to a month and a picture.
3 Select Options > Print.
4 Select an option.
5 Connect the USB cable to the phone.
6 Connect the USB cable to the printer.
3 Select Options > Edit in PhotoDJ™.
4 Edit the picture.
5 Select Options > Save picture.
To edit and save a video clip
1 From standby select Menu > Organizer
> File manager > Videos.
2 Scroll to a video clip and select Options
> VideoDJ™.
3 Edit the video clip.
4 Select Options > Save.
To trim a video clip
1 From standby select Menu > Organizer
> File manager > Videos.
2 Scroll to a video clip and select Options
> VideoDJ™ > Edit > Trim.
3 Select Set to set the starting point and
select Start.
4 Select Set to set the ending point and
select End.
5 Select Trim > Options >
Save.
Themes
You can change the appearance of the
screen through items such as colours
and wallpaper. You can also create new
themes and download them. For more
information, go to
www.sonyericsson.com/support.
To set a theme
1 From standby select Menu > Organizer
> File manager.
2 Scroll to Themes and select Open.
3 Scroll to a theme and select Set.
With Sony Ericsson Media Manager,
you can transfer music from CDs, your
computer or that you have purchased
to the phone memory or a memory card.
Sony Ericsson Media Manager
software is available for download
at www.sonyericsson.com/support.
Before you use Media Manager
You need one of these operating
systems to use Media Manager on your
computer:
• Windows® Vista® (32 bit and 64 bit
versions of: Ultimate, Enterprise,
Business, Home Premium, Home
Basic)
• Windows® XP (Pro or Home), Service
Pack 2 or higher
To use Media Manager
1 Connect the phone to a computer with
a USB cable.
2 Computer: Start/Programs/
Sony Ericsson/Media Manager.
3 Phone: Select Mass storage. The phone
will restart in this mode and restart again
when it is disconnected from the USB
cable.
Do not remove the USB cable from your
phone or computer during transfer, as
this may corrupt the memory card or the
phone memory.
4 For safe disconnection of the USB cable
in mass storage mode, right-click the
removable disk icon in Windows
Explorer and select Eject. See Using
a USB cable on page 58.
For details on transferring music, refer
to Media Manager Help. Click in the
top right corner of the Media Manager
window.
Online music and video clips
You can view video clips and listen to
music by streaming them to your phone
from the Internet. If settings are not
already in your phone, see Settings on
page 53. For more information, contact
your network operator or go to
www.sonyericsson.com/support.
You can listen to music before you
purchase and download it to your
phone.
This service is not available in all countries/
regions. In some countries/regions you
can purchase music from some of the
world’s top musical artists.
Before you use PlayNow™
You must have the required settings in
your phone. See Settings on page 53.
To listen to PlayNow™ music
1 From standby select Menu >
PlayNow™.
2 Select music from a list.
Downloading from PlayNow™
The price appears when you select to
download and save a music file. Your
phone bill or prepay card is debited
when a purchase is accepted.
To download a music file
1 When you have listened to a music file
preview, you can agree to accept the
conditions.
2 Select Yes to download.
3 A text message is sent to confirm
payment and the file is made available
to download.
2 Scroll to Music and select Open.
3 Scroll to a ringtone and select Options
> Send.
4 Select a transfer method.
Make sure the receiving device supports
the transfer method you select.
To receive a ringtone
• Follow the instructions that appear.
You are not allowed to exchange some
copyright-protected material. A protected
file has a
icon.
MusicDJ™
You can compose and edit your own
melodies to use as ringtones. A melody
consists of four types of tracks – Drums,
Basses, Chords and Accents. A track
contains a number of music blocks. The
blocks consist of pre-arranged sounds
with different characteristics. The blocks
are grouped into Intro, Verse, Chorus
and Break. You compose a melody by
adding music blocks to the tracks.
To compose a melody
1 From standby select Menu >
Entertainment > MusicDJ™.
2 Select to Insert, Copy or Paste blocks.
3 Use , , or to scroll between
the blocks.
4 Select Options > Save melody.
Sound recorder
You can record a voice memo or a call.
Recorded sounds can also be set as
ringtones.
In some countries/regions or states it is
required by law that you inform the other
person before recording the call.
To record a sound
• From standby select Menu >
Entertainment > Record sound.
To listen to a recording
1 From standby select Menu > Organizer
> File manager.
2 Scroll to Music and select Open.
3 Scroll to a recording and select Play.
Your phone contains several games.
You can also download games. Help
texts are available for most games.
To start a game
1 From standby select Menu >
Entertainment > Games.
2 Select a game.
To end a game
• Press .
Applications
You can download and run Java
applications. You can also view
information or set different permissions.
Before you use Java™ applications
If settings are not already entered in
your phone, see Settings on page 53.
To select a Java application
1 From standby select Menu > Organizer
> Applications.
2 Select an application.
To view information about a Java
application
1 From standby select Menu > Organizer
> Applications.
2 Scroll to an application and select
Options > Information.
To set permissions for a Java
application
1 From standby select Menu > Organizer
> Applications.
2 Scroll to an application and select
Options > Permissions.
3 Set permissions.
Java application screen size
Some Java applications are designed
for a specific screen size. For more
information, contact the application
vendor.
To set the screen size for a Java
application
1 From standby select Menu > Organizer
> Applications.
2 Scroll to an application and select
Options > Screen size.
3 Select an option.
Internet profiles for Java applications
Some Java applications need to
connect to the Internet to receive
information. Most Java applications
use the same Internet settings as your
Web browser.
Before you synchronize with an Internet
service, use the Internet, PlayNow™,
My friends, Java, picture messaging
and email you need to have settings in
your phone.
If settings are not already entered, you
can download settings by going to
www.sonyericsson.com/support.
To download settings using
a computer
1 Go to www.sonyericsson.com/support.
2 Follow the instructions on the screen.
Phone name
You can enter a name for your phone
to be shown to other devices.
To enter a phone name
1 From standby select Menu > Settings
> the Connectivity tab > Phone name.
2 Enter the phone name and select OK.
Using the Internet
To start browsing
1 From standby select Menu > Monternet.
2 Select Options > Go to.
3 Select an option.
To exit the browser
• When you browse the Internet, select
Options > Exit browser.
Using bookmarks
You can create and edit bookmarks as
quick links to your favourite Web pages.
To create a bookmark
1 When you browse the Internet, select
Options > Tools > Add bookmark.
2 Enter a title and an address. Select
Save.
To select a bookmark
1 From standby select Menu > Monternet.
2 Select Options > Go to > Bookmarks.
3 Scroll to a bookmark and select Go to.
To send a bookmark
1 From standby select Menu > Monternet
> Options > Go to > Bookmarks.
2 Scroll to a bookmark.
3 Select Options > Send and select
3 Scroll to mark text.
4 Select Copy.
5 Navigate to where you want to insert
the text and select Options > Paste.
To save a Web page
• When you browse the Internet, select
Options > Tools > Save page.
To view saved Web pages
1 From standby select Menu > Organizer
> File manager > Web pages > Saved
pages.
2 Scroll to an item and select View.
Internet security and certificates
Your phone supports secure browsing.
Certain Internet services, such as
banking, require certificates in your
phone. Your phone may already contain
certificates when you buy it or you can
download new certificates.
To view certificates in the phone
• From standby select Menu > Settings >
the General tab > Security > Certificates.
Web feeds
You can receive frequently updated
content, such as podcasts or news
headlines, as Web feeds. You can add
feeds for a page, if it has the icon.
To add new feeds for a Web page
• When you browse a page on the
Internet that has Web feeds, select
Options > Web feeds.
Updating Web feeds
You can manually update your feeds,
or schedule the update. When there
are updates, appears on the screen.
2 Select a device from the list.
3 Select Options > Allow connection.
To pair the phone with a Bluetooth
handsfree for the first time
1 From standby select Menu > Settings
> the Connectivity tab > Bluetooth >
Handsfree.
2 Select Yes.
3 Enter a passcode, if required.
To pair the phone with more than one
Bluetooth handsfree
1 From standby select Menu > Settings
> the Connectivity tab > Bluetooth >
Handsfree > My handsfree > New
handsfree.
2 Scroll to a device and select Add.
Power saving
You can save battery power with the
Power save function. You can only
connect with a single Bluetooth device.
You must turn this function off if you
want to connect with more than one
Bluetooth device at the same time.
To turn powersave on
• From standby select Menu > Settings
> the Connectivity tab > Bluetooth >
Powersave > On.
Transferring sound to and from
a Bluetooth handsfree
You can transfer the sound to and from
a Bluetooth handsfree using a phone
key or the handsfree key.
To transfer sound
1 From standby select Menu
> the Connectivity tab > Bluetooth >
Handsfree > Incoming call.
2 Select an option. In phone transfers
sound to the phone. In handsfree
transfers sound to the handsfree.
To transfer sound during a call
1 During a call, select Sound.
2 Select from the list.
File transfer
You can synchronize and transfer files
using Bluetooth wireless technology.
See Synchronization using a computer
on page 60.
You can connect your phone to
a computer with a USB cable to transfer
files using Mass storage or Media
transfer. You can also synchronize,
transfer files and use your phone as
a modem using Phone mode. For more
information go to the Getting started
section at
www.sonyericsson.com/support.
Before you use a USB cable
You need one of these operating
systems to transfer files using a
USB cable:
• Windows® 2000
• Windows XP (Pro and Home)
• Windows Vista™ (32 bit and 64 bit
versions of: Ultimate, Enterprise,
Business, Home Premium, Home
Basic)
Media transfer and Mass storage
If you have Windows Media Player 11
or higher installed on your PC you can
drag and drop files between your phone
or memory card and a computer in
Microsoft Windows Explorer.
Only use a USB cable supported by your
phone. Do not remove the USB cable from
your phone or computer during file transfer
as this may corrupt the phone memory
or the memory card.
To use media transfer and mass
storage mode
Before transferring files you must install
the Sony Ericsson PC Suite software on
your computer. You can download the
Sony Ericsson PC Suite from
will restart in this mode and restart again
when disconnected from the USB cable.
3 Phone: Select Media transfer and the
phone will remain activated during file
transfer.
4 Computer: Wait until the phone memory
and memory card appear as external
disks in Windows Explorer.
5 Drag and drop selected files between
the phone and the computer.
To disconnect a USB cable safely
1 Right-click the removable disk icon
in Windows Explorer.
2 Select Eject.
3 Disconnect the USB cable when the
following message is shown in the
phone: Mass storage session ended. It
is now safe to remove the USB cable.
Phone mode
Before synchronizing or using your
phone as a modem you must install
the Sony Ericsson PC Suite software
on your computer.
To use phone mode
1 Computer: Start PC Suite from Start/
Programs/Sony Ericsson/PC Suite.
2 Connect a USB cable to the phone and
the computer.
3 Phone: Select Phone mode.
4 Computer: When you are notified that
the Sony Ericsson PC Suite has found
your phone, you can start using the
phone mode applications.
For usage details, see the Sony Ericsson
PC Suite Help section once the software
has been installed on your computer.
Synchronizing
You can use a USB cable or Bluetooth
wireless technology to synchronize
phone contacts, appointments,
bookmarks, tasks and notes with
a computer program such as Microsoft
Outlook. You can also synchronize with
an Internet service using SyncML™ or
a Microsoft® Exchange Server using
Microsoft Exchange ActiveSync. For
more information go to the Getting
started section at
www.sonyericsson.com/support.
Use only one of the synchronization
methods at a time with your phone.
Before synchronizing you need to install
the Sony Ericsson PC Suite. The
software includes help information.
You can go to
www.sonyericsson.com/support to
download the software.
You need one of these operating
systems to use the PC Suite on
your computer:
• Windows XP (Pro and Home), Service
Pack 2 or higher
• Windows Vista (32 bit and 64 bit
versions of: Ultimate, Enterprise,
Business, Home Premium, Home
Basic)
Synchronization using an Internet
service
You can synchronize online using an
Internet service with your phone. If
Internet settings are not in your phone,
see Settings on page 53.
Before you start to synchronize
You must enter settings for SyncML
synchronization and register
a synchronization account online with
a service provider. Settings that are
required are:
Synchronization using a Microsoft®
Exchange Server
You can access and synchronize
corporate exchange information such
as email, contacts and calendar entries
with a Microsoft® Exchange Server
using your phone.
For more information on synchronization
settings, contact your IT administrator.
Before you start to synchronize
You must enter settings for Microsoft
Exchange ActiveSync to access a
Microsoft Exchange Server. Settings
that are required are:
• Server address – server URL
• Domain – server domain
• Username – account username
• Password – account password
Before you start to synchronize with
Exchange ActiveSync you must enter
the correct time zone in your phone.
To enter settings for Microsoft
Exchange ActiveSync
1 From standby select Menu > Organizer
> Synchronization.
2 Scroll to New account and select Add
> Exchange ActiveSync.
3 Enter a name for the new account and
select Cont.
4 Enter the required settings.
5 Scroll between the tabs to enter
additional settings.
6 Select Save.
To start synchronization
1 From standby select Menu > Organizer
> Synchronization.
2 Scroll to an account and select Start.
Update service
You can update your phone with the
latest software. You do not lose
personal or phone information.
In Flight mode the network and radio
transceivers are turned off to prevent
disturbance to sensitive equipment.
When the flight mode menu is activated
you are asked to select a mode the next
time you turn on your phone:
• Normal mode – full functionality.
• Flight mode – limited functionality.
You can use the Bluetooth™ function
in Flight mode.
To activate the flight mode menu
• From standby select Menu > Settings >
the General tab > Flight mode > Show
at startup.
To select flight mode
1 When the flight mode menu is activated,
turn off your phone.
2 Turn on your phone and select Flight
mode.
Page 63
Location services
You can get help to find your way, view
your approximate location and save
your favourite locations.
With the accessory GPS Enabler HGE-100
you can get more exact information about
your current location.
Some features of Location services use
the Internet.
Alarms
You can set a sound or the radio as an
alarm signal. The alarm sounds even if
the phone is turned off. When the alarm
sounds you can silence it or turn it off.
To set the alarm
1 From standby select Menu > Alarms.
2 Scroll to an alarm and select Edit.
3 Scroll to Time: and select Edit.
4 Enter a time and select OK > Save.
To set the recurrent alarm
1 From standby select Menu > Alarms.
2 Scroll to an alarm and select Edit.
3 Scroll to Recurrent: and select Edit.
4 Scroll to a day and select Mark.
5 To select another day, scroll to the day
and select Mark.
6 Select Done > Save.
To set the alarm signal
1 From standby select Menu > Alarms.
2 Scroll to an alarm and select Edit.
3 Scroll to Alarm signal: and select Edit.
4 Find and select an alarm signal. Select
Save.
To silence the alarm
• When the alarm sounds, press any key.
• To repeat the alarm, select Snooze.
To turn off an alarm
• When the alarm sounds, select Turn off.
To cancel the alarm
1 From standby select Menu > Alarms.
2 Scroll to an alarm and select TurnOff
The alarm in silent mode
You can set the alarm not to sound
when the phone is in silent mode.
To set an alarm to sound or not in
silent mode
1 From standby select Menu > Alarms.
2 Scroll to an alarm and select Edit.
3 Scroll to the tab.
4 Scroll to Silent mode: and select Edit.
5 Select an option.
The calendar can be synchronized with
a computer calendar, with a calendar
on the Web or with a Microsoft®
Exchange Server (Microsoft®
Outlook®). For more information
see Synchronizing on page 59.
Default view
You can choose whether month, week
or day view will appear first when you
open the calendar.
To set default view
1 From standby select Menu > Organizer
> Calendar.
2 Select Options > Advanced > Default
view.
3 Select an option.
Appointments
You can add new appointments
or reuse existing appointments.
To add an appointment
1 From standby select Menu > Organizer
> Calendar.
2 Select a date.
3 Scroll to New appointment and select
Add.
4 Enter the information and confirm each
entry.
5 Select Save.
To view an appointment
1 From standby select Menu > Organizer
> Calendar.
2 Select a date.
3 Scroll to an appointment and select
View.
To edit an appointment
1 From standby select Menu > Organizer
> Calendar.
2 Select a date.
3 Scroll to an appointment and select
View.
4 Select Options > Edit.
5 Edit the appointment and confirm each
entry.
6 Select Save.
To send an appointment
1 From standby select Menu > Organizer
> Calendar.
2 Select a date.
3 Scroll to an appointment and select
Options > Send.
4 Select a transfer method.
Make sure the receiving device supports
the transfer method you select.
Make sure the receiving device supports
the transfer method you select.
To set when reminders should sound
1 From standby select Menu > Organizer
> Tasks.
2 Scroll to a task and select Options >
Reminders.
3 Select an option.
A reminders option set in tasks affects
a reminders option set in calendar.
Profiles
You can change settings such as the
ring volume and vibrating alert to suit
different locations. You can reset all
profiles to the phone’s original settings.
To select a profile
1 From standby select Menu > Settings
> the General tab > Profiles.
2 Select a profile.
To view and edit a profile
1 From standby select Menu > Settings
> the General tab > Profiles.
2 Scroll to a profile and select Options
> View and edit.
You cannot rename the Normal profile.
Time and date
To set the time
1 From standby select Menu > Settings >
the General tab > Time & date > Time.
2 Enter the time and select Save.
To set the date
1 From standby select Menu > Settings
> the General tab > Time & date > Date.
2 Enter the date and select Save.
To set the time zone
1 From standby select Menu > Settings
> the General tab > Time & date > My
time zone.
2 Select the time zone you are in.
If you select a city, My time zone also
updates the time when daylight saving
time changes.
This lock only protects your
subscription. Your phone will work with
a new SIM card. If the lock is on, you
have to enter a PIN (Personal Identity
Number).
If you enter your PIN incorrectly three
times in a row, the SIM card is blocked
and you need to enter your PUK
(Personal Unblocking Key). Your PIN
and PUK are supplied by your network
operator.
To unblock the SIM card
1 When PIN blocked appears, enter your
PUK and select OK.
2 Enter a new four-to-eight-digit PIN and
select OK.
3 Re-enter the new PIN and select OK.
To edit the PIN
1 From standby select Menu > Settings
> the General tab > Security > Locks
> SIM protection > Change PIN.
2 Enter your PIN and select OK.
3 Enter a new four-to-eight-digit PIN and
select OK.
4 Re-enter the new PIN and select OK.
If Codes do not match appears, you
entered the new PIN incorrectly.
If Wrong PIN appears, followed by Old
PIN:, you entered your old PIN incorrectly.
To use the SIM card lock
1 From standby select Menu > Settings
> the General tab > Security > Locks
> SIM protection > Protection.
2 Select an option.
3 Enter your PIN and select OK.
Phone lock
You can stop unauthorized use of your
phone. Change the phone lock code
(0000) to any four-to-eight-digit
personal code.
It is important that you remember
your new code. If you forget it, you
have to take your phone to your local
Sony Ericsson retailer.
To use the phone lock
1 From standby select Menu > Settings
> the General tab > Security >
Locks
> Phone protection > Protection.
2 Select an option.
3 Enter the phone lock code and
Some problems will require you to call
your network operator.
For more support go to
www.sonyericsson.com/support.
Common questions
I have problems with memory capacity
or the phone is working slowly
Restart your phone every day to free
memory or do a Master reset.
Master reset
If you select Reset settings, the changes
that you have made to settings will be
deleted.
If you select Reset all, in addition to
your changes to settings, all contacts,
messages, personal data, and content
that you have downloaded, received or
edited will also be deleted.
To reset the phone
1 From standby select Menu > Settings
> the General tab > Master reset.
2 Select an option.
3 Follow the instructions that appear.
I cannot charge the phone or battery
capacity is low
The charger is not properly connected
or the battery connection is poor.
Remove the battery and clean the
connectors.
The battery is worn out and needs to
be replaced. See Charge the battery
on page 8.
No battery icon appears when I start
charging the phone
It may take a few minutes before the
battery icon appears on the screen.
Some menu options appear in grey
A service is not activated. Contact your
network operator.
I cannot use SMS/text messages on
my phone
Settings are missing or incorrect.
Contact your network operator to find
out the correct SMS service centre
setting. See Text messages on page 35.
I cannot use picture messages on my
phone
Your subscription does not include data
capability. Settings are missing or
incorrect. Please contact your network
operator.
See Help in your phone on page 8 or
go to www.sonyericsson.com/support
to order settings and follow the
instructions on the screen. See Settings
on page 53.
How do I turn on and off T9 Text Input
when writing?
When you enter text, press and hold
down . You will see at the top
of the screen when T9 Text Input is
activated.
How do I change phone language?
1 From standby select Menu > Settings
> the General tab > Language > Phone
language.
2 Select an option.
I cannot use the Internet
Your subscription does not include
data capability. Internet settings are
missing or incorrect. Please contact
your network operator.
See Help in your phone on page 8 or
go to www.sonyericsson.com/support
to order Internet settings, and follow
the instructions on the screen. See
Settings on page 53.
I cannot use keypad shortcuts while
browsing
Make sure your Keypad mode is set
as Shortcuts. See To select Internet keypad shortcuts on page 54.
I have set Web feeds to show in
standby, but no Web feeds appear
in standby
Check if a note is shown in standby.
If so, hide it. See To hide a note from standby on page 65.
The phone does not ring or rings too
softly
Make sure the microphone has
not been muted. See To mute the microphone during a call on page 22.
Check the ringtone volume. See To set the ringtone volume on page 50.
Check the profile. See To select a profile on page 66.
Check the Divert call options. See
To divert calls on page 31.
The phone cannot be detected by
other devices using Bluetooth wireless
technology
You have not turned the Bluetooth
function on. Make sure that the visibility
is set to show phone. See To turn the Bluetooth function on on page 56.
I cannot synchronize or transfer data
between my phone and my computer,
when using a USB cable.
The cable or software has not been
properly installed. Go to
www.sonyericsson.com/support to read
Getting started guides which contain
detailed installation instructions and
troubleshooting guides.
Where can I find the regulatory
information such as my IMEI number
if I cannot turn on my phone?
Error messages
Insert SIM
There is no SIM card in your phone
or you may have inserted it incorrectly.
See Charge the battery on page 8.
The SIM card connectors need
cleaning. If the card is damaged,
contact your network operator.
Insert correct SIM card
Your phone is set to work only with
certain SIM cards. Check if you are
using the correct operator SIM card.
Wrong PIN/Wrong PIN2
You have entered your PIN or PIN2
incorrectly.
Enter the correct PIN or PIN2 and select
Yes. See To insert the SIM card on
page 6.
PIN blocked/PIN2 blocked
You have entered your PIN or PIN2
code incorrectly three times in a row.
To unblock, see SIM card lock on
page 67.
Codes do not match
Codes that you have entered do not
match. When you want to change a
security code, for example your PIN,
you have to confirm the new code.
See SIM card lock on page 67.
Your phone is in flight mode. See Flight
mode on page 62.
Your phone is not receiving any network
signal, or the received signal is too
weak. Contact your network operator
and make sure that the network has
coverage where you are.
The SIM card is not working properly.
Insert your SIM card in another phone.
If this works, it is probably your phone
that is causing the problem. Please
contact the nearest Sony Ericsson
service location.
Emerg. calls only
You are within range of a network, but
you are not allowed to use it. However,
in an emergency, some network
operators allow you to call the
international emergency number 112.
See Emergency calls on page 23.
PUK blocked. Contact operator.
You entered your personal unblocking
key code (PUK) incorrectly 10 times in
a row.
Charging, alien battery
The battery that you are using is not
a Sony Ericsson-approved battery.
See Battery on page 73.
Important information
Sony Ericsson Consumer Web site
On www.sonyericsson.com/support there is
a support section where help and tips are only
a few clicks away. Here you find the latest computer
software updates and tips on how to use your
product more efficiently.
Guidelines for Safe and
Efficient Use
Please follow these guidelines. Failure
to do so might entail a potential health
risk or product malfunction. If in doubt
as to its proper function, have the
product checked by a certified service
partner before charging or using it.
Recommendations for care and safe
use of our products
• Handle with care and keep in a clean and dust-free
place.
• Warning! May explode if disposed of in fire.
• Do not expose your product to liquid or moisture
or excess humidity.
• Do not expose to extreme
temperatures. Do not expo se the
battery to temperatures above +60°C
(+140°F).
• Do not expose to flames or lit tobacco
products.
• Do not drop, throw or try to bend your
product.
• Do not paint or attempt to
disassemble or modify your product.
Only Sony Ericsson authorized
personnel should perform service.
instructions of the medical device manufacturer
before using your product near pacemakers or other
medical devices or equipment.
• Discontinue use of electronic devices or disable the
radio transmitting functionality of the device where
required or requested to do so.
• Do not use where a potentially explosive atmosphere
exists.
• Do not place your product or install wireless
equipment in the area above an air bag in your car.
• Caution: Cracked or broken displays may create
sharp edges or splinters that could be harmful upon
contact.
• Do not use your Bluetooth Headset in positions where
it is uncomfortable or will be subject to pressure.
Children
Warning! Keep out of the reach of
children. Do not allow children to play
with mobile phones or accessories.
They could hurt themselves or others.
Products may contain small parts that could
become detached and create a choking hazard.
Power supply (Charger)
Connect the charger to power sources as marked
on the product. Do not use outdoors or in damp
areas. Do not alter or subject the cord to damage
or stress. Unplug the unit before cleaning it. Never
alter the plug. If it does not fit into the outlet, have a
proper outlet installed by an electrician. When power
supply is connected there is a small drain of power.
To avoid this small energy waste, disconnect the
power supply when the product is fully charged. Use
of charging devices that are not Sony Ericsson
branded may impose increased safety risks.
Battery
New or idle batteries can have short-term reduced
capacity. Fully charge the battery before initial use.
Use for intended purpose only. Charge the battery
in temperatures between +5°C (+41°F) and +45°C
(+113°F). Do not put the batt ery into your mouth. Do
not let the battery contacts touch another metal
object. Turn off the product before remo ving the
battery. Performance depends on temperatures,
signal strength, usage patterns, features selected
and voice or data transmissions. The stand-by time
for this battery is up to 390 hours. Only Sony Ericsson
service partners should remove or replace built-in
batteries. Use of batteries that are not Sony Ericsson
branded may pose increased safety risks.
Note: The environmental protection period
(EPUP) of battery is 5 years.
5
Personal medical devices
Mobile phones may affect implanted medical
equipment. Reduce risk of interference by keeping
a minimum distance of 15 cm (6 inches) between
the phone and the device. Use the phone at your right
ear. Do not carry the phone in your breast pocket.
Turn off the phone if you suspect interference. For
all medical devices, consult a physician and the
manufacturer.
Driving
Some vehicle manufacturers forbid the use of phones
in their vehicles unless a handsfree kit with an
external antenna supports the installation. Check
with your vehicle manufacturer’s representative to
be sure that your mobile phone or Bluetooth
handsfree will not affect the electronic systems in
your vehicle. Full attention should be given to driving
at all times and local laws and regulations restricting
the use of wireless devices while driving must be
observed.
Some products provide GPS/Location based
functions. Location determining functionality is
provided “As is” and “With all faults”. Sony Ericsson
does not make any representation or warranty as to
the accuracy of such location information.
Use of location-based information by the device may
not be uninterrupted or error free and may ad ditionally
be dependent on network service availability. Please
note that functionality may be reduced or prevented
in certain environments such as building interiors or
areas adjacent to buildings.
Caution: Do not use GPS functionality in a manner
which causes distraction from driving.
Emergency calls
Calls cannot be guaranteed under all conditions.
Never rely solely upon mobile phones for essential
communications. Calls may not be possible in all
areas, on all networks, or when certain network
services and/or phone features are used.
Antenna
Use of antenna devices not marketed by
Sony Ericsson could damage your phone, reduce
performance, and produce SAR levels above the
established limits. Do not cover the antenna with
your hand as this affects call quality, power levels
and can shorten talk and standby times.
Radio frequency (RF) exposure and
Specific Absorption Rate (SAR)
When your phone or Bluetooth handsfree is turned
on, it emits low levels of radio frequency energy.
International safety guidelines have been developed
through periodic and thorough evalu ation of scientific
studies. These guidelines establish permitted levels
of radio wave exposure. The guidelines include a
safety margin designed to assure the safety of
all persons and to account for any variations in
measurements.
Specific Absorption Rate (SAR) is used to measure
radio frequency energy absorbed by the body when
using a mobile phone. The SAR value is determined
at the highest certified power level in laboratory
conditions, but because the phone is designed to
use the minimum power necessary to access the
chosen network, the actual SAR level can be well
below this value. There is no proof of difference in
safety based on difference in SAR value.
Products with radio transmitters sold in the US
must be certified by the Federal Communications
Commission (FCC). When required, tests are
performed when the phone is placed at the ear and
when worn on the body. For body-worn operation,
the phone has been tested when positioned a
minimum of 15 mm from the body without any metal
parts in the vicinity of the phone or when properly
used with an appropriate Sony Ericsson accessory
and worn on the body.
For more information about SAR and radio frequency
exposure go to: www.sonyericsson.com/cn.
Malware
Malware (short for malicious software) is software
that can harm your mobile phone or other computers.
Malware or harmful applications can include viruses,
worms, spyware, and other unwanted programs.
While your device does employ security measures
to resist such efforts, Sony Ericsson does not warrant
or represent that your device will be impervious to
introduction of malware. You can however reduce
the risk of malware attacks by using care when
downloading content or accepting applications,
refraining from opening or responding to messages
from unknown sources, using trustworthy services
to access the Internet, and only downloading content
to your mobile phone from known, reliable sources.
Use only Sony Ericsson branded original accessories
and certified service partners. Sony Ericsson does
not test third-party accessories. Accessories may
influence RF Exposure, radio performance, sound
loudness, electric safety and other areas. Thirdparty accessories and parts may pose a risk to your
health or safety or decrease performance.
Disposal of old electrical
and electronic equipment
Electronic equipment and batteries
should not be included as household
waste but should be left at an
appropriate collection point for recycling. This helps
prevent potential negative consequences for the
environment and human health. Check local
regulations by contacting your local city office, your
household waste disposal service, the shop where
you purchased the product or calling a Sony Ericsson
Call Center.
Disposing of the battery
Check local regulations or call
a Sony Ericsson Call Center for
information. Never use municipal
waste.
Declaration of substances
When this product is operated under
the conditions in the product manual,
the environmental protection period
(EPUP) is 20 years.
20
Toxic or hazardous substances
Part
Name
Phone
Battery
Access
ories
and
charger
O: Indicates that this toxic or hazardous substance
contained in all of the homogeneous materials for this
part is below the limit requirement in SJ/T 11363-2006.
X: Indicates that this toxic or hazardous substance
contained in at least one of the homogeneous materials
used for this part is above the limit requirement in SJ/T
11363-2006. ( Currently there are no alternative
technologies available)
Mer
Lead
cury
(Pb)
(Hg)
XO O OOO
XO O OOO
XO O OOO
Cad
mium
(Cd)
Hexa
valent
chromium
(Cr6+)
Polybromi
nated
biphenyls
(PBB)
Polybrom
inated
diphenyl
ethers
(PBDE)
Memory Card
If your product comes complete with a removable
memory card, it is generally compatible with the
handset purchased but may not be compatible with
other devices or the capabilities of their memory
cards. Check other devices for compatibility before
purchase or use. If your product is equ ipped with a
memory card reader, check memory card
compatibility before purchase or use.
Memory cards are generally formatted prior to
shipping. To reformat the memory card, use a
compatible device. Do not use the standard operating
system format when formatting the memory card on
a PC. For details, refer to the operating instructions
of the device or contact customer support.
If your device requires an adapter for insertion into
the handset or another device, do not insert the card
directly without the required adapter.
Precautions on Memory Card Use
• Do not expose the memory card to moisture.
• Do not touch terminal connections with your hand
or any metal object.
• Do not strike, bend, or drop the memory card.
• Do not attempt to disassemble or modify the memory
card.
• Do not use or store the memory card in humid or
corrosive locations or in excessive heat such as
a closed car in summer, in direct sunlight or near
a heater, etc.
• Do not press or bend the end of the memory card
adapter with excessive force.
• Do not let dirt, dust, or foreign objects get into the
insert port of any memory card adapter.
• Check you have inserted the memory card correctly.
• Insert the memory card as far as it will go into any
memory card adapter needed. The memory card
may not operate properly unless fully inserted.
• We recommend that you make a backup copy of
important data. We are not responsible for any loss
or damage to content you store on the memory card.
• Recorded data may be damaged or lost when you
remove the memory card or memory card adapter,
turn off the power while formatting, reading or writing
data, or use the memory card in locations subject
to static electricity or high electrical field emissions.
Protection of personal information
Erase personal data before disposing of the product .
To delete data, perform a master reset. Deleting data
from the phone memory does not ensure that it
cannot be recovered. Sony Ericsson does not warrant
against recovery of information and does not assume
responsibility for disclosure of any information even
after a master reset.
Loudness warning!
Avoid volume levels that may be harmful to your
hearing.
End User License Agreement
Software delivered with this device and its media is
owned by Sony Ericsson Mobile Communications
AB, and/or its affiliated companies and its suppliers
and licensors.
Sony Ericsson grants you a non-exclusive limited
license to use the Software solely in conjunction
with the Device on which it is installed or delivered.
Ownership of the Software is not sold, transferred
or otherwise conveyed.
Do not use any means to discover the source code
or any component of the Software, reproduce and
distribute the Software, or modify the Software. You
are entitled to transfer rights and obligations to the
Software to a third party, solely together with the
Device with which you received the Software,
provided the third party agrees in writing to be bound
by the terms of this License.
This license exists throughout the useful life of this
Device. It can be terminated by transferring your
rights to the Device to a third party in writing.
Failure to comply with any of these terms and
conditions will terminate the license immediately.
Sony Ericsson and its third party suppliers and
licensors retain all rights, title and interest in and to
the Software. Sony Ericsson, and, to the extent that
the Software contains material or code of a third
party, such third party, shall be entitled third party
beneficiaries of these terms.
This license is governed by the laws of Sweden.
When applicable, the foregoing applies to statutory
consumer rights.
In the event Software accompanying or provided
in conjunction with your device is provided with
additional terms and conditions, such provisions
shall also govern your possession and usage of the
Software.
Limited Warranty
Communications AB, SE-221 88 Lund, Sweden,
(Sony Ericsson) or its local affiliated company
provides this Limited Warranty for your mobile phone
and original accessory delivered with your mobile
phone (hereinafter referred to as “Product”).
Should your Product need warranty service, please
return it to the dealer from whom it was purchased,
or contact your local Sony Ericsson Call Center
(national rates may apply) or visit
www.sonyericsson.com/cn to get further information.
WHAT WE WILL DO
If, during the warranty period, this Product fails to
operate under normal use and service, due to defects
in design, materials or workmanship, Sony Ericsson
authorised distributors or servi ce partners, in the
country/region* where you purchased the Prod uct,
will, at their option, either repair or replace the
Product in accordance with the terms and conditions
stipulated herein.
Sony Ericsson and its service partners reserve the
right to charge a handling fee if a returned Product
is found not to be under warranty according to the
conditions below.
Please note that some of your personal settings,
downloads or other information may be lost when
your Sony Ericsson Product is repaire d or replaced.
At present Sony Ericsson may be prevented by
applicable law, other regulation or technical
restrictions from making a backup copy of
certain downloads. Sony Ericsson does not take
any responsibility for any lost information of any
kind and will not reimburse you for any such loss.
You should always make backup copies of all the
information stored on your Sony Ericsson Product
such as downloads, calendar and contacts before
handing in your Sony Ericsson Product for repair or
replacement.
CONDITIONS
1 The warranty is valid only if the original proof of
purchase issued to the original purchaser by a
Sony Ericsson authorised dealer, specifying the date
of purchase and serial number**, for this Product, is
presented with the Product to be repaired or replaced.
Sony Ericsson reserves the right to refuse warranty
service if this information has been removed or
changed after the original purchase of the Product
from the dealer.
2 If Sony Ericsson repairs or replaces the Product, the
repaired or replaced Product shall be warranted for
the remaining time of the original warranty period or
for thirty (30) days from the date of repair, whichever
is longer. Repair or replacement may involve the use
of functionally equivalent reconditioned units.
Replaced parts or components will become the
property of Sony Ericsson.
3 This warranty does not cover any failure of the
Product due to normal wear and tear, or due to
misuse, including but not limited to use in other than
the normal and customary manner, in accordance
with the Sony Ericsson instructions for use and
maintenance of the Product. Nor does this warranty
cover any failure of the Product due to accident,
software or hardware modification or adjustment,
acts of God or damage resulting from liquid.
A rechargeable battery can be charged and
discharged hundreds of times. However, it will
eventually wear out – this is not a defect. When
the talk-time or standby time is noticeably shorter,
it is time to replace your battery. Sony Ericsson
recommends that you use only batteries and chargers
approved by Sony Ericsson.
Minor variations in display brightness and color may
occur between phones. There may be tiny bright or
dark dots on the display. These are called defective
pixels and occur when individual dots have
malfunctioned and can not be adjusted. Two
defective pixels are deemed acceptable.
Minor variations in the appearance of the camera
image may occur between phones. This is not
uncommon in digital cameras and does not mean
that the camera is defective in an y way.
4 Since the cellular system on which the Product is to
operate is provided by a carrier independent from
Sony Ericsson, Sony Ericsson will not be responsible
for the operation, availability, coverage, services or
range of that system.
5 This warranty does not cover Product failures caused
by installations, modifications, or repair or opening
of the Product performed by a non-Sony Ericsson
authorised person.
6 The warranty does not cover Product failures which
have been caused by use of accessories or other
peripheral devices which are not Sony Ericsson
branded original accessories intended for use with
the Product.
7 Tampering with any of the seals on the Product will
void the warranty.
8 THERE ARE NO EXPRESS WARRANTIES,
WHETHER WRITTEN OR ORAL, OTHER THAN
THIS PRINTED LIMITED WARRANTY. ALL
IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED TO
THE DURATION OF THIS LIMITED WARRANTY.
IN NO EVENT SHALL SONY ERICSSON OR ITS
LICENSORS BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY NATURE
WHATSOEVER, INCLUDING BUT NOT LIMITED
TO LOST PROFITS OR COMMERCIAL LOSS; TO
THE FULL EXTENT THOSE DAMAGES CAN BE
DISCLAIMED BY LAW.
Some countries/regions/states do not allow the
exclusion or limitation of incidental or consequential
damages, or limitation of the duration of implied
warranties, so the preceding limitations or exclusions
may not apply to you.
The warranty provided does not affect the
consumer’s statutory rights under applicable
legislation in force, nor the consumer’s rights against
the dealer arising from their sales / purchase contract.
* In some countries/regions additional information
is requested. If so, this is clearly shown on the valid
proof of purchase.
FCC Statement
This device complies with Part 15 of
the FCC rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
Any change or modification not expressly approved
by Sony Ericsson may void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communication s. However, there
is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause har mful interference
to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment
and receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-- Consult the dealer or an experi enced radio/TV
technician for help.
Industry Canada Statement
This device complies with RSS-210 of Industry
Canada.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of
the device.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
Declaration of Conformity
for G502c
We, Sony Ericsson Mobile Communications AB of
Nya Vattentornet
SE-221 88 Lund, Sweden
declare under our sole responsibility that our product
Sony Ericsson type AAC-1052171-BV
and in combination with our accessories, to which
this declaration relates is in conformity with the
appropriate standards EN 301 511:V9.0.2,
EN 300 328:V1.7.1, EN 301 489-7:V1.3.1,
EN 301 489-17:V1.2.1, EN 60 950-1:2006
following the provisions of, Radio Equipment and
Telecommunication
Terminal Equipment directive 1999/5/EC.
Lund, January 2008
Shoji Nemoto,
Head of Product Business Group GSM/UMTS
We fulfill the requirements of the R&TTE Directive
(1999/5/EC).