Sony 4-180-179-11(1) User Manual

4-180-179-11(1)

LCD Digital Colour TV

Operating Instructions

Setting Up

Watching TV

Additional Information

KDL-52NX803 / 46NX703 / 40NX803 / 40NX703

NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM

A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug s upplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i.e., marked with or ) must be used. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

FUSE

How to replace the fuse

Open the fuse compartment with a blade screwdriver, and replace the fuse. Please refer to the illustration that actually equipped with the product.

Introduction

Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

Notes on Digital TV function

• Any functions related to Digital TV ( ) will only work in countries or areas where DVB-T (MPEG-2 and H.264/MPEG-4 AVC) digital terrestrial signals are broadcast or where you have access to a compatible DVB-C (MPEG2 and H.264/MPEG-4 AVC) cable service. Please confirm with your local dealer if you can receive a DVB-T signal where you live or ask your cable provider if their DVB-C cable service is suitable for integrated operation with this TV.

• Your cable provider may charge a fee for their services, or require you to agree to its terms and conditions of business.

• This TV set complies with DVB-T and DVB-C specifications, but compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts are not guaranteed.

• Some Digital TV functions may not be available in some countries/areas and DVB-C cable may not operate correctly with some providers.

For a list of compatible cable providers, refer to the support web site:

http://support.sony-europe.com/TV/ DVBC/

• Instructions about “Installing Wall Mount Bracket” are included within this TV’s instructions manual.

• The illustrations used in this manual are of the KDL-40NX803 series unless otherwise state.

Trademark information

is a registered trademark of the DVB

Project. HDMI, the HDMI logo and High-

Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

DLNA and DLNA CERTIFIED are trademarks and/or service marks of Digital Living Network Alliance.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

“BRAVIA” and are trademarks of Sony Corporation.

” and “XrossMediaBar” are

“XMB

™

trademarks of Sony Corporation and Sony Computer Entertainment Inc.

Notice for Wireless Signal

1. Hereby, Sony, declares that this unit is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

To obtain the declaration of conformity (DoC) for R&TTE Directive, please access the following URL address.

http://www.compliance.sony.de/

2. TV wireless system can only be used in the following countries:

Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, The Netherlands, Norway, Poland, Portugal, Slovak Republic, Romania, Slovenia, Spain, Sweden, Switzerland, Turkey, and The United Kingdom.

TV Wireless System Regulation Information

For Customers in Italy

s with respect to private use, by the

Legislative Decree of 1.8.2003, no. 259 (“Code of Electronic Communications”). In particular Article 104 indicates when the prior obtainment of a general authorization is required and Art. 105 indicates when free use is permitted;

s with respect to the supply to the public

of the RLAN access to telecom networks and services (e.g. TV wireless system), by the Ministerial Decree 28.5.2003, as amended, and Art. 25 (general authorization for electronic communications networks and services) of the Code of electronic communications

s with respect to private use, by the

Ministerial Decree 12.07.2007

For Customers in Norway

Use of this radio equipment is not allowed in the geographical area within a radius of 20 km from the centre of Ny-Ålesund, Svalbard.

For Customers in Cyprus

The end user must register the RLAN (or WAS or WiFi) devices in the Department of Electronic Communications (P.I. 6/ 2006 and P.I. 6A/2006).

P.I. 6/2006 is the Radiocommunications (Categories of Stations Subject to General Authorization and Registration) Order of

2006. P.I. 6A/2006 is the General Authorization

for the use of Radiofrequencies by Radio Local area Networks and by Wireless Access Systems, including Radio Local Area Networks (WAS/RLAN)

For Customers in France

The WLAN (WiFi) feature of this LCD Digital Colour TV shall exclusively be used inside buildings. Any use of the WLAN (WiFi) feature of this LCD Digital Colour TV outside of the buildings is prohibited on the French territory. Please make sure that the WLAN (WiFi) feature of this LCD Digital Colour TV is disabled before any use outside of the buildings. (ART Decision 2002-1009 as amended by ART Decision 03-908, relating to radiofrequencies use restrictions).

Table of Contents

Checking the accessories ..............................................................................................................3

Inserting batteries into the remote .................................................................................................3

Setting Up

Attaching the Table-Top Stand ......................................................................................................4

Connecting an antenna (aerial)/Set Top Box/recorder (e.g. DVD recorder)..................................5

Preventing the TV from toppling over ............................................................................................5

Bundling the cables........................................................................................................................6

Performing the initial set-up ...........................................................................................................6

Detaching the Table-Top Stand from the TV .................................................................................7

Watching TV

To watch programmes ...................................................................................................................8

To utilise the TV’s features ............................................................................................................8

To use i-Manual .............................................................................................................................9

Additional Information

Troubleshooting...........................................................................................................................10

Specifications...............................................................................................................................11

Installing the Accessories (Wall-Mount Bracket)..........................................................................13

TV installation dimensions table ..................................................................................................14

Safety Information........................................................................................................................15

Precautions..................................................................................................................................16

• Operating instructions are built into your BRAVIA TV. Refer to “To use i-Manual” for operation (page 9).

• Before operating the TV, please read “Safety Information” (page 15). Retain this manual for future reference.

Checking the accessories

AC power cord (mains lead) (1) Cable holder (1) Remote (1) Size AAA batteries (R3 type) (2) Black spacers (4)

(KDL-52/40NX803 only)

Stand rear cover (1) Bottom cover (1)

(KDL-52/40NX803 only)

Table-Top Stand (1)* Fixing screws for stand (M5 × 16) (4) Assembling screws for stand (M5 × 16) (4)

(KDL-40NX803 and KDL-40NX703 only)

* Disassembled except for KDL-52NX803 and

KDL-46NX703. Refer to the supplied Table-Top Stand leaflet to assemble the stand.

Inserting batteries into the remote

Slide the cover to open.

Setting Up

Attaching the Table-Top Stand

1 Refer to the supplied Table-Top Stand

leaflet for proper attachment for some TV models.

2 Place the TV set on the Table-Top

Stand.

3 Fix the TV to the Table-Top Stand

according to the arrow marks that guide the screw holes using the supplied screws.

Adjusting the viewing angle of the TV

This TV can be adjusted within the angles shown below.

6º0º

• If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m {15 kgf·cm}.

4 After all the screws are tightened,

attach the supplied stand rear cover to the Table-Top Stand.

Remove screw as shown.

• To return to 0°, reverse the above procedure.

Install screw into the top screw hole of the Table-Top Stand.

Slide in.Lift up and tilt.

Connecting an antenna (aerial)/Set Top Box/ recorder (e.g. DVD recorder)

Connecting a Set Top Box/recorder (e.g. DVD recorder) with SCART

• For KDL-52/40NX803, after connecting cables, install the bottom cover and stand rear cover.

Preventing the TV from toppling over

Setting Up

Set Top Box/recorder (e.g. DVD recorder)

• Right Angle Type Universal SCART Lead is recommended for this connection.

Connecting a Set Top Box/recorder (e.g. DVD recorder) with HDMI

1 Install a wood screw (4 mm in

diameter, not supplied) in the TV stand.

2 Install a machine screw (M4 × 16, not

supplied) into the screw hole of the TV.

3 Tie the wood screw and the machine

screw with a strong cord (not supplied).

Set Top Box/recorder (e.g. DVD recorder)

Bundling the cables

*KDL-52/40NX803 only

Performing the initial set-up

KDL-52/ 40NX803

KDL-46/ 40NX703

1 Connect the TV to your AC power

outlet (mains socket).

2 Check the ENERGY SAVING

SWITCH setting is on (

z).

• Do not bundle the AC power cord (mains lead) together with other cables.

3 Press 1 on the TV.

When you switch on the TV for the first time, the Language menu appears on the screen.

Follow the instructions on the screen.

Digital Auto Tuning: When you select “Cable”, we recommend that you select “Quick Scan” for quick tuning. Set “Frequency” and “Network ID” according to the information supplied from your cable provider. If no channel is found using “Quick Scan”, try “Full Scan” (though it may take some time).

For a list of compatible cable providers, refer to the support web site: http://support.sony-europe.com/TV/ DVBC/

+ 14 hidden pages