The information label are located on
the rear of the TV. For KDL–NX801/
800 series models, they can be found
by removing the bottom cover. Record
model name and serial numbers on the
information label in the spaces
provided below. Refer to them
whenever you call upon your Sony
dealer regarding this TV.
Model Name
Serial No.
CAUTION
To prevent electric shock and blade
exposure, do not use this polarized AC plug
with an extension cord, receptacle or other
outlet unless the blades can be fully inserted.
• Operate the TV only on 110-240 V
AC (U.S.A./Canada 120 V AC)
• Avoid operating the TV at
temperatures below 41°F (5°C).
• Some people may experience
discomfort (such as eye strain,
fatigue, or nausea) while watching
3D video images or playing
stereoscopic 3D games. Sony
recommends that all viewers take
regular breaks while watching 3D
video images or playing stereoscopic
3D games. The length and frequency
of necessary breaks will vary from
person to person. You must decide
what works best. If you experience
any discomfort, you should stop
watching the 3D video images or
playing stereoscopic 3D games until
the discomfort ends; consult a doctor
if you believe necessary. You should
also review (i) the instruction
manual of any other device or media
used with this television and (ii) our
website (www.sony.com/tvsupport)
for the latest information. The vision
of young children (especially those
under six years old) is still under
development. Consult your doctor
(such as a pediatrician or eye doctor)
before allowing young children to
watch 3D video images or play
stereoscopic 3D games. Adults
should supervise young children to
ensure they follow the
recommendations listed above.
• Do not use, store, or leave the 3D
Glasses or the battery near fire, or in
places with a high temperature, e.g.,
in direct sunlight, or in sun-heated
cars.
• When using the simulated 3D
function, please note that the
displayed image is modified from
the original due to the conversion
done by this television.
Licensing Information
Macintosh is a trademark of Apple Inc.,
registered in the U.S. and other countries.
HDMI, the HDMI Logo, and HighDefinition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC in the United States
and other countries.
Fergason Patent Properties, LLC:
U.S. Patent No. 5,717,422
U.S. Patent No. 6,816,141
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
In the United States, TV Guide and TV
Guide On Screen are registered trademarks
of TV Guide Entertainment Group, Inc. and/
or its subsidiaries or affiliates, and are used
under a license by Gemstar-TV Guide
International, Inc. and/or its subsidiaries. In
Canada, TV Guide is a registered mark of
Transcontinental Inc., and is used under a
license by Gemstar-TV Guide International,
Inc. and/or its subsidiaries.
The TV Guide On Screen system is
manufactured under license from GemstarTV Guide International, Inc. and/or its
subsidiaries.
The TV Guide On Screen system is
protected by one or more of the following
United States patents 6,498,895; 6,850,693;
6,396,546; 5,940,073; 6,239,794 to
Gemstar-TV Guide International, Inc. and/or
its subsidiaries.
Gemstar-TV Guide International, Inc. and/or
its related affiliates are not in any way liable
for the accuracy or availability of the
program schedule information or other data
in the TV Guide On Screen system and
cannot guarantee service availability in your
area. In no event shall Gemstar-TV Guide
International, Inc. and/or its related a ffiliates
be liable for any damages in connection with
the accuracy or availability of the program
schedule information or other data in the TV
Guide On Screen system.
Blu-ray Disc is a trademark.
“BRAVIA” and , S-Force,
Motionflow, BRAVIA Sync, and are
trademarks or registered marks of Sony
Corporation.
“XMB” and “xross media bar” are
trademarks of Sony Corporation and Sony
Computer Entertainment Inc.
“PlayStation” is a registered trademark and
“PS3” is a trademark of Sony Computer
Entertainment Inc.
®
, the DLNA Logo and DLNA
DLNA
CERTIFIED
marks, or certification marks of the Digital
Living Network Alliance.
®
are trademarks, service
Your BRAVIA TV is
ENERGY STAR
qualified in the “Home”
mode.
It meets strict energy
efficiency guidelines set
by the U.S. Environmental
Protection Agency and Department of
Energy. ENERGY STAR is a joint program
of these government agencies, designed to
promote energy efficient products and
practices.
Changes to certain features, settings, and
functionalities of this TV (i.e. TV Guide,
Picture/Sound, Light Sensor, Power
Savings) can increase or change the power
consumption.
Depending upon such changed settings, the
power consumption may exceed the limits
required for the ENERGY STAR
qualification in the “Home” mode.
The 55 class has a 54.6 inch viewable
image size (measured diagonally).
®
~
• The illustrations of the remote
control used in this manual are of the
RM-YD036 unless otherwise stated.
• The illustrations used in this manual
may differ depending on your TV
model.
2
Table of Contents
Checking the accessories..............................................................................................................4
Inserting batteries into the remote control .....................................................................................4
Setting up your TV
Attaching the Table-Top Stand......................................................................................................6
Connecting the TV.........................................................................................................................9
Securing the TV...........................................................................................................................13
Organizing the AC power cord ....................................................................................................14
• Operating instructions are built into your BRAVIA TV. Refer to “To use i-Manual” for operation
(page 18).
• Retain this manual for future reference.
The BRAVIA® Full HDTV Experience
Thank you for choosing Sony! Your new BRAVIA®
TV opens the door to the “Full HDTV Experience.”
This document will help you get the most out of your
TV.
This TV displays all video input signals in a resolution of 1,920 dots × 1,080 lines.
3
Checking the accessories
For all models
Table-Top Stand (1)
Remote control (1)
Size AAA batteries (2)
For KDL-60NX801, KDL-60/52/
46NX800 and KDL-46/40NX700 models
AC power cord (1)
Bottom Cover (1)
KDL-60/52/46NX800 only)
Stand Rear Cover (1)
Fixing screws for Table-Top Stand
(M5 × 16) (4)
*3
Assembling Screws for Table-Top
Stand (M5 × 16) (4) (KDL-40NX700 only)
Black Spacers (4)
only)
Silver Spacers (4)
KDL-60NX800 only)
Screws (M6 × 20) (4)
and KDL-60NX800 only)
For KDL-55NX811, KDL-60/55/
46NX810, KDL-46/40NX711 and KDL46/40NX710 models
Hexagon wrench (1)
Assembling screws for Table-Top Stand (4)
(KDL-55NX811, KDL-60/55/46NX810,
KDL-46NX711 and KDL-46NX710 only)
Assembling screws for Table-Top Stand (2)
(KDL-40NX711, KDL-40NX710 only)
3D Glasses (battery included) (2)
(KDL-55NX811 and KDL-46/40NX711 only)
Pouch for 3D Glasses (2)
(KDL-55NX811 and KDL-46/40NX711 only)
3D Sync Transmitter (1)
(KDL-55NX811 and KDL-46/40NX711 only)
Double-sided tape (2)
(KDL-55NX811and KDL-46/40NX711 only)
*1 KDL-60NX801/60NX800 models are shipped
with the parts attached to the TV.
KDL-55NX811, KDL-60/55/46NX810, KDL46/40NX711, KDL-46/40NX710 and KDL40NX700 models requires assembling. Refer to
other leaflet to assemble the Table-Top Stand.
*2 Please refer to the model name printed on the
remote control.
*3 KDL-60NX801/60NX800 models are shipped
with the parts attached to the TV.
*4 These screws and spacers are required when
installing an optional Wall-Mount Bracket. You
*1
*2
*3
(KDL-60NX801 and
*3
*4
(KDL-52/46NX800
*4
(KDL-60NX801 and
*4
(KDL-60NX801
must use these screws instead of the ones
provided with the bracket for safety reasons. Be
sure to keep them in a safe place until you are
ready to use the Wall-Mount Bracket. See
page 23 for the recommended Wall-Mount
Bracket for your TV.
Inserting batteries into the
remote control
1 Remove the protection sheet.
2 Push and slide the cover upward.
Guidelines for Remote Control
• Point your remote control directly at the IR
sensor located on your TV.
• Make sure that no objects are blocking the
path between the remote control and the IR
sensor on your TV.
• Fluorescent lamps can interfere with your
remote control; try turning off the fluorescent
lamps.
• If you are having problems with the remote
control, reinsert or replace your batteries and
make sure that they are correctly inserted.
4
Programming the Remote Control
Your remote control can be programmed to use other equipment and is pre-programmed to operate
the following Sony equipment.
Function Button Sony Equipment Code Number
DVDDVD Player31033
AMPReceiver52172
STBDigital Satellite01639
Programming Other Equipment
2
2
4
3
Confirm the Programming
If you can turn your equipment on and off using the green POWER button, the programming is
complete. If not, try the next code listed.
Follow the steps below to program your TV remote control.
1 Look for the code in the Manufacturer’s Code List (refer to i-Manual) that
corresponds to the equipment you would like to operate with the Sony
remote control. If more than one code is provided, try programming the
first code listed. If your equipment’s code is not listed, visit
http://esupport.sony.com/remotecodes
2 Press and hold a DVD, AMP or STB function button simultaneously with
INPUT button and release.
When in the programming mode, the function button (DVD, AMP, STB)
blinks for approximately 30 seconds until a code is entered.
3 Enter the five digit code using - while the function buttons
4
(DVD, AMP, STB) are lit. If the code is not entered within 30 seconds,
you must repeat step 2.
4 Press or ENT to confirm the code. If successfully programmed, the
function button (DVD, AMP, STB) will blink twice, if not, it blinks five
times.
for a more comprehensive list.
~
• In some cases, you may not be able to program your remote control. If this is the case, use your equipment’s
own remote control.
• Any of the function buttons (DVD, AMP, STB) can be programmed to operate other equipment regardless of
the labeling. For example, if programmed with the correct code, a Blu-ray Disc player can be operated with
the DVD button. This is useful if your equipment does not match any of the labeled buttons.
To reset the remote control to the factory default:
Press SCENE, TV POWER, and simultaneously. The four function buttons (DVD, AMP, STB,
and TV) blink when successfully reset.
5
Setting up your TV
Some TV models are packaged with a detached
Table-Top Stand so you can mount your TV to
a wall right away. If you are not mounting the
TV to a wall, you will need to attach the TableTop Stand. You will need a Phillips
screwdriver and the supplied screws to
complete the task. Look for the attachment
instructions provided with the TV.
Be sure to consider the following while setting
up your TV:
• Disconnect all cables when carrying the
TV.
• Carry the TV with the adequate number of
people; larger size TVs require two or more
people.
• Correct hand placement while carrying the
TV is very important for safety and to avoid
damage.
Attaching the Table-Top
Stand
Refer to the supplied Table-Top Stand
instruction leaflet for proper attachment for
some TV models.
~
• Do not put stress on the LCD panel or the frame
around the screen.
• Be careful to not pinch your hands or the AC
power cord when you install the TV unit to the
Table-Top Stand.
For KDL-52/46NX800 and KDL-46/
40NX700
1 Gently slide the TV unit onto the
Table-Top Stand and align the screw
holes.
• Ensure your TV has adequate ventilation,
see page 16.
• For best picture quality, do not expose the
screen to direct illumination or sunlight.
• Avoid installing the TV in a room with
reflective wall and floor materials.
• If the TV is brought directly from a cold to
a warm location, or is placed in a very damp
room, or is placed in a room in which
heating has just been turned on, moisture
may condense on the surface or inside the
TV. Should this occur, turn off the TV and
leave the TV off until the moisture
evaporates, and then the TV can be used. If
you notice moisture condensation between
the glass panel and the LCD, turn on the TV
and the condensation will evaporate after
the TV has warmed up.
2 Use the supplied screws to attach the
TV unit to the Table-Top Stand.
~
• If you use an electric screwdriver, set the
tightening torque at approximately 1.5 N·m
{15 kgf·cm}.
3 After all the screws are tighten cover
the Table-Top Stand with the supplied
Stand Rear Cover.
6
For KDL-55NX811, KDL-60/55/
46NX810, KDL-46/40NX711 and
KDL-46/40NX710
1 Align with the two dowels of the Table-
Top Stand, and gently place the TV,
checking the f mark is facing the front.
2 Attach the TV and Table-Top Stand
with the supplied screw and hexagon
wrench.
Setting up your TV
~
• Set the torque setting to approximately 3 N·m {30
kgf·cm}.
Reattaching the Table-Top Stand to the
TV
Attach to the original position using the
removed screws. See “Detaching the TableTop Stand from the TV” (page 15).
(Continued)
7
Adjusting the viewing angle (except 60-inch models)
This TV can be adjusted within the angles shown below.
For KDL-52/46NX800 and KDL-46/40NX700
1
Remove screw as
shown.
0°
6°
2
3
4
Install screw into the
top screw hole of the
Table-Top Stand.
Lift up and tilt.
~
• Reverse the steps when readjusting the angle back to 0 degree.
Slide in.
For KDL-55NX811, KDL-55/46NX810, KDL-46/40NX711 and KDL-46/40NX710
0°6°
8
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.