Sony 40EX700, 52EX701, 32EX700, 46EX700, 46EX701 User Manual

SERVICE MANUAL

HISTORY INFORMATION FOR THE FOLLOWING MANUAL:

SERVICE MANUAL

AZ1-L Chassis

ORIGINAL MANUAL ISSUE DATE: 1/2010

Version Date Subject

1.0 1/25/2010 No revisions or updates

2.0 1/29/2010 Corrected part information for Lens. Replaced pages i, 16-18.

3.0 3/17/2010 Corrected Disassembly/Part Number Information section. Replaced pages 12-20. Corrected Service Adjustment Information. Reissue entire manual.

LCD Digital Color TV

9-888-268-03

SERVICE MANUAL

AZ1-L Chassis

Self Diagnosis

Supported model

LCD Digital Color TV

9-888-268-03

MODEL LIST

MODEL COMMANDER DESTINATION MODEL COMMANDER DESTINATION

KDL-32EX700 RM-YD033 US

KDL-52EX700 RM-YD033 US KDL-32EX700 RM-YD055 CND/MX KDL-40EX700 RM-YD033 US KDL-40EX700 RM-YD055 CND/MX KDL-40EX703 RM-YD055 CND KDL-46EX700 RM-YD033 US KDL-46EX700 RM-YD055 CND/MX KDL-46EX701 RM-YD033 US KDL-46EX701 RM-YD055 CND KDL-46EX703 RM-YD055 CND

KDL-52EX700 RM-YD055 CND/MX

KDL-52EX701 RM-YD033 US

KDL-52EX701 RM-YD055 CND

KDL-52EX703 RM-YD055 CND

KDL-60EX700 RM-YD033 US

KDL-60EX700 RM-YD055 CND/MX

KDL-60EX701 RM-YD033 US

KDL-60EX701 RM-YD055 CND

KDL-60EX703 RM-YD055 CND

9-888-268-03

SPECIFICATIONS

p

a

s

Model name KDL- 60EX703

60EX701 60EX700

52EX703 52EX701 52EX700

46EX703 46EX701 46EX700

40EX703 40EX700

System

Television system NTSC: American TV standard

Channel coverage Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69

Panel system LCD (Liquid Crystal Display) Panel

Speaker output 10 W + 10 W

ATSC (8VSB terrestrial): ATSC compliant 8VSB QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)

Analog Cable: 1 - 135 / Digital Cable: 1 - 135

Input/Output jacks

CABLE/ANTENNA 75-ohm external terminal for RF inputs

VIDEO IN 1/2 VIDEO / AUDIO

COMPONENT IN 1/2 YPBPR (Component Video) / Signal format: 480i, 480p, 720p, 1080i, 1080p / AUDIO

HDMI IN 1/2/3/4 HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p

AUDIO OUT 500 mVrms (typical)

DIGITAL AUDIO OUT (OPTICAL)

PC/HDMI 4 AUDIO IN Stereo mini jack

LAN

USB/DLNA Refer to the i-Manual for supported format.

*1 For LAN connections, use a Category 7 10BASE-T/100BASE-TX cable (not supplied).

HDMI: Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital

AUDIO (HDMI IN 4)

PCM/Dolby Digital optical signal

BGR golana ,nip-51 bus-DNI CP

10BASE-T/100BASE-TX connector (Connection speed may differ depending on the network environment. 10BASE-T/100BASE-TX communication rate and communication quality are not guaranteed for this TV.)*

32EX700

Licensing Information

Macintosh is a trademark of Apple Inc., registered in the U.S. and other countries.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.

Fergason Patent Properties, LLC: U.S. Patent No. 5,717,422 U.S. Patent No. 6,816,141

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

In the United States, TV Guide and TV Guide On Screen are registered trademarks of TV Guide Entertainment Group, Inc. and/or its subsidiaries or affiliates, and are used under a license by Gemstar-TV Guide International, Inc. and/or its subsidiaries. In Canada, TV Guide is a registered mark of Transcontinental Inc., and is used under a license by Gemstar-TV Guide International, Inc. and/or its subsidiaries.

The TV Guide On Screen system is manufactured under license from Gemstar-

1

TV Guide International, Inc. and/or its subsidiaries.

The TV Guide On Screen system is protected by one or more of t he following United States patents 6,498,895; 6,850,693; 6,396,546; 5,940,073; 6,239,794 to Gemstar-TV Guide International, Inc. and/or its subsidiaries.

Gemstar-TV Guide International, Inc. and/or its related affiliates are not in any way liable for the accuracy or availability of the program schedule information or other data in the TV Guide On Screen system and cannot guarantee service availability in your area. In no event shall Gemstar-TV Guide International, Inc. and/or its related affiliates be liable for any damages in connection with the accuracy or availability of the program schedule information or other data in the TV Guide On Screen system.

Blu-ray Disc is a trademark.

“BRAVIA” and , S-Force, Motionflow, BRAVIA Sync, and are trademarks or registered marks of Sony Cor

oration.

“XrossMediaBar” is a trademark of Sony Corporation. “XMB” is a trademark of Sony Corporation and Sony Computer Entertainment Inc.

“PlayStation” is a registered trademark and “PS3” is a trademark of Sony Computer Entertainment Inc.

®

, the DLNA Logo and DLNA

DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance.

Your BRAVIA TV is ENERGY STAR in the “Home” mode. It meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and Department of Energy. ENERGY STAR is joint program of these government agencies, designed to promot e energy efficient product and practices.

Changes to certain features, settings, and functionalities of this TV (i.e. TV Guide, Picture/Sound, Light Sensor, Power Savings) can increase or change the power consumption.

Depending upon such changed settings, the power consumption may exceed the limits required for the ENERGY STAR qualification in the “Home” mode.

The 32 class has a 31.5 inch viewable image size (measured diagonally).

®

qualified

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 1 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

SPECIFICATIONS

Model name KDL- 60EX703

60EX701 60EX700

52EX703 52EX701 52EX700

46EX703 46EX701 46EX700

40EX703 40EX700

32EX700

Power and others

Power requirement 110-240 V AC, 50/60 Hz (U.S.A./Canada 120 V AC, 60 Hz)

Power consumption

in use

2

in DAM*

in standby less than 0.17 W with 120 V AC and less than 0.23 W with

Screen size (inches measured diagonally)

Speaker Full range with speaker (mm)

Dimensions with stand (mm)

Mass with stand (kg)/(lb.) 38.1/84.0 27.0/59.5 21.3/47.0 17.8/39.3 12.7/28.0

Supplied accessories

Optional accessories Connecting cables / Support Belt Kit / Wall-Mount Bracket

*1 The 32" and 40" models require assembling. Refer to other leaflet to assemble the Table-Top Stand. *2 The Stand Rear Cover is attached to the Table-Top Stand for 46, 52 and 60 inch models.

*3 Please refer to the model name printed on the remote control.

• Optional accessories availability depends on its stock.

• Design and specifications are subject to change without notice.

box (2) (inches)

(inches)

without stand (mm)

(inches)

wall-mount hole pattern (mm)

wall-mount screw size (mm)

without stand (kg)/(lb.) 31.3/69.0 22.7/50.0 18.4/40.6 14.9/32.9 10.7/23.6

208 W 142 W 125 W 107 W 91 W

15 W

(You may hear a clicking noise during the download but this is normal.)

less than 0.13 W with 120 V AC and less

240 V AC

60 inches 52 inches 46 inches 40 inches

34 × 160

3

1

/8 × 6 3/8

1,431 × 909 × 386

56 3/8 × 35 7/8 × 15 1/

1,431 × 877 × 66

56 3/8 × 34 5/8 × 2 5/8

AC power cord (1) / Table-Top Stand (1) *1 (except KDL-60EX700/60EX701/60EX703 / models) / Stand Rear Cover (1) *2 / Fixing screws for Table-Top Stand (M5 × 16) (4) (except KDL-60EX700/60EX701/60EX703 models)/ Assembling Screws for Table-Top Stand (M5 × 16) (4) (for KDL-40EX700/40EX703/32EX700 models)/ Remote control (1) *3 / Size AAA batteries (2) /

USB Wireless LAN Adapter UWA-BR100 (1)

1,252 × 805 × 350

4

49 3/8 × 31 3/4 × 13 7/

1,252 × 775 × 65

49 3/8 × 30 5/8 × 2 5/8

1,118 × 730 × 280

8

44 1/8 × 28 3/4 × 11 1/

1,118 × 698 × 65

44 1/8 × 27 1/2 × 2 5/

M6

(length: refer to diagram on page 13.)

(for KDL-60EX701/52EX701/46EX701 models)

than 0.2 W with 240 V AC

)lacitrev( senil 080,1 × )latnoziroh( stod 029,1 noituloser yalpsiD

985 × 655 × 280

8

38 7/8 × 25 7/8 × 11 1/

985 × 623 × 64

8

38 7/8 × 24 5/8 × 2 5/8

8

31.5 inches (32 class)

811 × 539 × 250 32 × 21 1/4 × 9 7/

811 × 507 × 65

32 × 20 × 2 5/

8

002 × 002003 × 003003 × 004

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 2 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

WARNINGS AND CAUTIONS

CAUTION

These servicing instructions are for use by qualiﬁ ed service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualiﬁ ed to do so.

CARRYING THE TV

• Carry the TV with the adequate number of people; larger size TVs require two or more people.

• Correct hand placement while carrying the TV is very important for safety and to avoid damage.

WARNING!!

An isolation transformer should be used during any service to avoid possible shock hazard, because of live chassis. The chassis of this receiver is directly connected to the AC power line.

! SAFETY-RELATED COMPONENT WARNING!!

Components identiﬁ ed by shading and ! mark on the exploded views are critical for safe operation. Replace all components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. It is essential that all critical parts be replaced only with the part number speciﬁ ed in this manual to prevent electric shock, ﬁ re, or other hazard. Circuit adjustments that are critical for safe operation are identiﬁ ed in this manual. Follow these procedures whenever critical components are replaced or improper operation is suspected.

NOTE: Do not modify the original design without obtaining written permission from the manufacturer or you will void the original parts and labor guarantee.

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 3 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

ATTENTION!!

Ces instructions de service sont à l’usage du personnel de service qualiﬁ é seulement. Pour prévenir le risque de choc électrique, ne pas faire l’entretien autre que celui contenu dans le Mode d’emploi à moins que vous soyez qualiﬁ é faire ainsi.

POUR TRANSPORTER LE TÉLÉVISEUR

• Transportez le téléviseur avec le nombre de personnes approprié ; un téléviseur de grande taille doit être transporté par au moins deux personnes.

• Lors du transport du téléviseur, l’emplacement des mains est très important pour votre sécurité, ainsi que pour éviter de causer des dommages.

ALERTE!!

Aﬁ n d’eviter tout risque d’electrocution provenant d’un chássis sous tension, un transformateur d’isolement doit etre utilisé lors de tout dépannage. Le chássis de ce récepteur est directement raccordé à l’alimentation du secteur.

WARNING AND CAUTIONS

! ATTENTION AUX COMPOSANTS RELATIFS A LA SECURITE!!

Les composants identiﬁ es par une trame et par une marque ! sur les schemas de principe, les vues explosees et les listes de pieces sont d’une importance critique pour la securite du fonctionnement. Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement sont identiﬁ es dans le present manuel. Suivre ces procedures lors de chaque remplacement de composants critiques, ou lorsqu’un mauvais fonctionnement suspecte.

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 4 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

SAFETY-RELATED WARNING

USE CAUTION WHEN HANDLING THE LCD PANEL

When repairing the LCD panel, be sure you are grounded by using a wrist band. When installing the LCD panel on a wall, the LCD panel must be secured using the 4 mounting holes on the rear cover.

1) Do not press on the panel or frame edge to avoid the risk of electric shock.

2) Do not scratch or press on the panel with any sharp objects.

3) Do not leave the module in high temperatures or in areas of high humidity for an extended period of time.

4) Do not expose the LCD panel to direct sunlight.

5) Avoid contact with water. It may cause a short circuit within the module.

6) Disconnect the AC power when replacing the inverter circuit.

(High voltage occurs at the inverter circuit at 650Vrms.)

7) Always clean the LCD panel with a soft cloth material.

8) Use care when handling the wires or connectors of the inverter circuit. Damaging the wires may cause a short.

9) Protect the panel from ESD to avoid damaging the electronic circuit (C-MOS).

10) During the repair, DO NOT leave the Power On for more than 1 hour while the TV is face down on a cloth.

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 5 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer:

1. Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder splashes and bridges.

2. Check the interboard wiring to ensure that no wires are “pinched” or touching high-wattage resistors.

3. Check that all control knobs, shields, covers, ground straps, and mounting hardware have been replaced. Be absolutely certain that you have replaced all the insulators.

4. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement.

0.15 μF

To Exposed Metal Parts on Set

AC Voltmeter (0.75V)

5. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.

6. Check the line cords for cracks and abrasion. Recommend the replacement of any such line cord to the customer.

7. Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below.

Figure A. Using an AC voltmeter to check AC leakage.

Earth Ground

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 6 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

LEAKAGE TEST

The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA(500 microamperes). Leakage current can be measured by any one of three methods.

1. A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers’ instructions to use these instructions.

2. A battery-operated AC milliampmeter. The Data Precision 245 digital multimeter is suitable for this job.

3. Measuring the voltage drop across a resistor by means of a VOM or batteryoperated AC voltmeter. The “limit” indication is 0.75 V, so analog meters must have an accurate low voltage scale.

SAFETY CHECK-OUT

Trouble Light

AC Outlet Box

Ohmmeter

The Simpson’s 250 and Sanwa SH-63TRD are examples of passive VOMs

that are suitable. Nearly all battery-operated digital multimeters that have a 2 VAC range are suitable (see Figure A).

Cold-water Pipe

HOW TO FIND A GOOD EARTH GROUND

A cold-water pipe is a guaranteed earth ground; the cover-plate retaining screw on most AC outlet boxes is also at earth ground.

If the retaining screw is to be used as your earth ground, verify that it is at ground by measuring the resistance between it and a cold-water pipe with an ohmmeter. The reading should be zero ohms.

If a cold-water pipe is not accessible, connect a 60-to 100-watt trouble-light (not a neon lamp) between the hot side of the receptacle and the retaining screw. Try both slots, if necessary, to locate the hot side on the line; the lamp should light at normal brilliance if the screw is at ground potential (see Figure B).

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 7 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

Figure B. Checking for earth ground.

SELF DIAGNOSIS FUNCTIONS

R

SELF DIAGNOSIS FUNCTION

The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED will automatically begin to ﬂ ash. The number of times the LED ﬂ ashes translates to a probable source of the problem. A deﬁ nition of the STANDBY LED ﬂ ash indicators is listed in the instruction manual for the user’s knowledge and reference. If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these problems occur.

DIAGNOSTIC TEST INDICATORS

When an error occurs, the STANDBY LED will ﬂ ash a set number of times to indicate the possible cause of the problem. If there is more than one error, the LED will identify the ﬁ rst of the problem areas. Result for all of the following diagnostic items are displayed on screen.

If the screen displays a “0”, no error has occurred .

Self Diagnosis

Supported model

Diagnostic

Item

RGB_SEN RGB Sensor ACK Error

MAIN_POWE

DC_ALERT DC Alert

DTT-WDT DTT Error

AUD_PROT Audio Error Detection BALANCER Panel Balancer Error TCON ERR TCON Error HFR ERR HFR Error P_ID_ERR Panel ID NVM Error BACKLITE Backlight Error TEMP_ERR Temperature Error BAL Board

FAN_ERR

Diagnostic Item

Description

Main Power

Over Voltage Protection

Fan Error

(Not Used in these models)

Number of times

Standby LED blinks

NA

2

3

4

5

6

7

Possible Location

NA

GE3A (Power) BOARD (KDL-32EX700/40EX700/40EX703 Only)

GE2B (Power) BOARD (KDL-46EX700/46EX701/46EX703/52EX700/52EX701/52EX703 Only)

GE2A (Power) BOARD (KDL-60EX700/60EX701/60EX703 Only)

BAL Board

GE3A (Power) BOARD (KDL-32EX700/40EX700/40EX703 Only)

GE2B (Power) BOARD (KDL-46EX700/46EX701/46EX703/52EX700/52EX701/52EX703 Only)

GE2A (Power) BOARD (KDL-60EX700/60EX701/60EX703 Only)

BAL Board BAL Board LCD Panel

TCON Control MT Board

BAL Board

NA

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 8 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

STANDBY LED FLASH COUNT

SELF DIAGNOSIS FUNCTIONS

2 times

5 times

Ambient Sensor/

(IR) Infrared Receiver

Picture Off /

Timer LED

Standby LED Power LED

LED ON 0.3 sec.

LED OFF 0.3 sec.

LED OFF

3 sec.

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 9 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

VIEWING THE SELF CHECK DIAGNOSTIC LIST

For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be conﬁ rmed, it is possible to bring up past occurrences of a failure for conﬁ rmation on the Self Check diagnostic screen:

1. TV must be in standby mode. (Power off).

2. Press the following buttons on the Remote Commander within a second of each other:

SELF DIAGNOSIS FUNCTIONS

DISPLAY

Channel 5 Volume -

* NOTE: This differs from accessing Service Adjustments Mode (Volume +)

SELF CHECK

000 RGB_SEN 002 MAIN_POWE

003 DC_ALERT1 003 AUD_PROT 003 DTT_WDT 004 BALANCER 005 HFR_ERR 005 TCON_ERR 005 P_ID_ERR

006 BACKLITE 007 TEMP_ERR 007 FAN_ERR 010 RESERVED 011 RESERVED

12345-00333-0678912345-00333-06789--

-------------- -------------- -------------- 00 0501210811 0412311234 0311111825 00

-------------- -------------- -------------- 00

POWER

.

StandBy LED Flash Count

Diagnostic Item

Error history (Most recent time the failure occurred)

Error history (Failure time before the last occurrence) Error history (Failure time before the 2

Error Count (00-99)

Panel operation time by hour (MAX:65535)

Boot count (MAX:65535)

Total operation time by hour (MAX:65535)

nd

to last occurrence)

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 10 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

SELF DIAGNOSIS FUNCTIONS

CLEARING THE SELF CHECK DIAGNOSTIC LIST

Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen after you have completed the repairs to be sure you have cleared the result display to “0”.

1. To clear the Error history and Error count: Press the Channel 8 Channel 0.

2. To clear the Panel operation time: Press the Channel

7

Channel 0.

EXITING THE SELF CHECK DIAGNOSTIC SCREEN

1. To exit the Self Diagnostic screen, turn off the power to the TV by pressing the POWER button on the remote or the POWER button on the TV.

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 11 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

SEC 1. DISASSEMBLY/PART NUMBER INFORMATION

1-1. TABLE-TOP STAND ASSEMBLY REMOVAL

A

Remove 4 screws from Table-Top Stand

Assembly

B

Lift up TV set to detach from Table-Top Stand

Assembly

Components not identiﬁ ed by a part number or description are not stocked because they are seldom required for routine service.

NOTE: The components identiﬁ ed by shading and ! mark are critical for safety. Replace only with part number speciﬁ ed.

The component parts of an assembly are indicated by the reference numbers in the far right column of the parts list and within the dotted lines of the diagram.

NOTE: Les composants identiﬁ es per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero speciﬁ e.

NOTE: The components identiﬁ ed by a red outline and a mark contain conﬁ dential information. Speciﬁ c instructions must be adhered to whenever these components are repaired and/or replaced. See Appendix A: Encryption Key Components in the back of this manual.

Items marked with an asterisk are not stocked since

*

they are seldom required for routine service. Expect some delay when ordering these components.

(Check the Sony Electronics Service Information website for any additional service related issues for this model.)

2-580-608-01 SCREW, +PSW M5X16

1

A

B

5

3

2

C

Gently place the TV set face down onto a soft cloth

C

Soft Cloth

4

REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]

1 X-2547-875-1 BASE (M3A) ASSY (KDL-32EX700 ONLY) 1 X-2547-876-1 BASE (ML3A) ASSY (KDL-40EX700/40EX703/46EX700/46EX701/46EX703 ONLY) 1 X-2547-877-1 BASE (LL3A) ASSY (KDL-52EX700/52EX701/52EX703 ONLY) 1 X-2546-099-1 BASE (LLL3A) ASSY (KDL-60EX700/60EX701/60EX703 ONLY)

2 4-170-477-01 COVER, NECK (M3A FRONT) (KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703 ONLY) 2 4-170-479-01 COVER, NECK (LL3A FRONT) (KDL-52EX700/52EX701/52EX703 ONLY) 2 4-170-476-01 COVER, NECK (LLL3A FRONT) (KDL-60EX700/60EX701/60EX703 ONLY)

3 4-170-485-01 COVER, NECK (M3A REAR) (KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703 ONLY) 3 4-170-487-01 COVER, NECK (LL3A REAR) (KDL-52EX700/52EX701/52EX703 ONLY) 3 4-170-488-01 COVER, NECK (LLL3A REAR) (KDL-60EX700/60EX701/60EX703 ONLY)

4 4-170-449-01 NECK (M3A) (KDL-32EX700 ONLY) 4 4-170-450-01 NECK (ML3A) (KDL-40EX700/40EX703/46EX700/46EX701/46EX703 ONLY) 4 4-170-451-01 NECK (LL3A) (KDL-52EX700/52EX701/52EX703 ONLY) 4 4-170-452-01 NECK (LLL3A) (KDL-60EX700/60EX701/60EX703 ONLY) 5 2-580-608-01 SCREW, +PSW M5X16 (SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV) For product protection and safety reasons, Sony strongly recommends that you use the screws provided with the TV

CAUTION: These screws cannot be used to secure the TV to

the Wall Mount Brackets

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 12 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

DISASSEMBLY/PART NUMBER INFORMATION

1-2. REAR COVER, SWITCH UNIT, AND POWER SWITCH REMOVAL

A

Remove screws from Rear Cover to detach from Bezel

10 from KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703 Only

12 from KDL-52EX700/52EX701/52EX703/60EX700/60EX701/60EX703 Only

CAUTION: The Rear Covers on the models listed have

sharp edges. Use caution when handling the Rear Cover to avoid injury. Areas marked with Yellow in Figure 1 have sharp edges. The self-tapping screws used to secure the Rear Cover to the unit are shorter than those normally used on Sony televisions. Using a longer screw will cause a penetration of the front bezel assembly.

B

Remove screws from Rear Cover to detach from Panel

Bracket

2 from KDL-32EX700/40EX700/40EX703 Only

4 from KDL-46EX700/46EX701/46EX703/52EX700/ 52EX701/52EX703 Only 6 from KDL-60EX700/60EX701/60EX703 Only

C

Remove screws from Rear Cover to detach from Panel

3 from KDL-32EX700/40EX700/40EX703/

46EX700/46EX701/46EX703 Only 4 from KDL-52EX700/52EX701/52EX703/ 60EX700/60EX701/60EX703 Only

NOTE: The components identiﬁ ed by shading and ! mark are critical for safety. Replace only with part number speciﬁ ed.

NOTE: Les composants identiﬁ es per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero speciﬁ e.

NOTE: The components identiﬁ ed by a red outline and a mark contain conﬁ dential information. Speciﬁ c instructions must be adhered to whenever these components are repaired and/or replaced. See Appendix A: Encryption Key Components in the back of this manual.

(Check the Sony Electronics Service Information website for any additional service related issues for this model.)

1-2-1. KDL-32EX700 AND KDL-40EX700/40EX703

2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3

2-580-611-01 SCREW, +PSW M6X16

2-580-600-01 SCREW, +PSW M4X8

4-159-298-01 SCREW, +PSW M4X10

2-580-591-01 SCREW, +PSW M3X5 7-685-646-79 SCREW, +BVTP 3X8 TYPE2 IT-3 2-580-603-01 SCREW, +PSW M4X16

55

56

57

L

58

54

53

52

D

Remove 4 screws from Rear Cover to detach from

Vesa Bracket position

E

Remove 1 screw from Rear Cover to detach from

Terminal position

F

Lift Hook Cover to detach from Under Cover

G

Remove 1 screw to detach AC Inlet from Bottom Frame

(KDL-60EX700/60EX701/60EX703 Only)

H

Slide-out AC Inlet to remove from Under Cover

(All Except KDL-60EX700/60EX701/60EX703)

I

Remove screws from Under Cover to detach from

Bottom Frame

2 from KDL-32EX700 Only

5 from KDL-40EX700/40EX703/ 46EX700/46EX701/46EX703/ 52EX700/52EX701/52EX703 Only 4 from KDL-60EX700/60EX701/60EX703 Only

J

Lift up Switch Unit and disconnect 1 connector to

remove from Panel

K

Slide out Power Switch and disconnect 1 connector to

remove from Switch unit

L

Remove 2 screws to detach Vesa Brackets from Panel

K

51

F

G

J

A

H

I

D

C

B

32 40/46/52/60

REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]

51 X-2541-871-1 REAR COVER(32) ASSY (KDL-32EX700 ONLY) 51 X-2541-872-1 REAR COVER(40) ASSY (KDL-40EX700/40EX703 ONLY)

E

52 4-164-917-01 LABEL, REAR TERMINAL (US/CND MODELS ONLY) 52 4-164-917-11 LABEL, REAR TERMINAL (MX MODELS ONLY) 53 3-297-324-02 COVER, ECS

54 4-169-437-01 COVER, HOOK (32) (KDL-32EX700 ONLY) 54 4-171-125-01 COVER, HOOK (40/46) (KDL-40EX700/40EX703 ONLY)

55 4-169-434-01 COVER, UNDER (32) (KDL-32EX700 ONLY) 55 X-2547-768-1 COVER, UNDER (40/46/52) ASSY (KDL-40EX700/40EX703 ONLY) ! 56 1-842-031-11 AC INLET (2P) 57 1-487-804-11 SWITCH UNIT 58 1-798-309-11 POWER SWITCH

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 13 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

DISASSEMBLY/PART NUMBER INFORMATION

NOTE: The components identiﬁ ed by shading and ! mark are critical for safety. Replace only with part number speciﬁ ed.

NOTE: Les composants identiﬁ es per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero speciﬁ e.

(Check the Sony Electronics Service Information website for any additional service related issues for this model.)

1-2-2. KDL-46EX700/46EX701/46EX703 AND KDL-52EX700/52EX701/52EX703 1-2-3. KDL-60EX700/60EX701/60EX703

65

66

67

68

64

63

78

77

NOTE: The components identiﬁ ed by a red outline and a mark contain conﬁ dential information. Speciﬁ c instructions must be adhered to whenever these components are repaired and/or replaced. See Appendix A: Encryption Key Components in the back of this manual.

75

76

74

73

62

61

REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]

61 X-2541-873-1 REAR COVER (46) ASSY (KDL-46EX700/46EX701/46EX703 ONLY) 61 X-2541-874-1 REAR COVER(52) ASSY (KDL-52EX700/52EX701/52EX703 ONLY) 62 4-164-917-01 LABEL, REAR TERMINAL (US/CND MODELS ONLY) 62 4-164-917-11 LABEL, REAR TERMINAL (MX MODELS ONLY)

63 3-297-324-02 COVER, ECS 64 4-171-125-01 COVER, HOOK (40/46) (KDL-46EX700/46EX701/46EX703 ONLY) 64 4-169-439-01 COVER, HOOK (52) (KDL-52EX700/52EX701/52EX703 ONLY)

65 X-2547-768-1 COVER, UNDER (40/46/52) ASSY ! 66 1-842-031-11 AC INLET (2P) 67 1-487-804-11 SWITCH UNIT 68 1-798-309-11 POWER SWITCH

72

71

REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]

71 X-2541-875-1 REAR COVER(60) ASSY 72 4-164-917-01 LABEL, REAR TERMINAL (US/CND MODELS ONLY) 72 4-164-917-11 LABEL, REAR TERMINAL (MX MODELS ONLY)

73 3-297-324-02 COVER, ECS 74 4-169-440-01 COVER, HOOK (60) 75 4-169-436-01 COVER, UNDER (60)

! 76 1-842-104-31 AC INLET 77 1-487-804-11 SWITCH UNIT 78 1-798-309-11 POWER SWITCH

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 14 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

DISASSEMBLY/PART NUMBER INFORMATION

1-3. SPEAKERS, HLR BOARD, AND LCD PANEL BRACKETS REMOVAL

A

Lift right-side Panel Bracket to detach from Panel

1 from KDL-32EX700/40EX700/40EX703 Only

2 from KDL-46EX700/46EX701/46EX703/52EX700/52EX701/52EX703 Only

3 from KDL-60EX700/60EX701/60EX703 ONLY

B

Remove 2 screws from Speaker Bracket Right (KDL-60EX700/60EX701/60EX703 Only)

C

Lift up Speaker Bracket Right to detach from Bezel

D

Remove screws from Speaker to detach from Speaker Bracket Right

4 from KDL-32EX700 Only

2 from all except KDL-32EX700

E

Remove 2 screws from Bottom Frame to detach from Bezel

F

Remove screws from Bottom Frame to detach from Panel

1 from all except KDL-60EX700/60EX701/60EX703

2 from KDL-60EX700/60EX701/60EX703 Only

G

Remove 2 screws from Speaker Bracket Left

(KDL-60EX700/60EX701/60EX703 Only)

NOTE: The components identiﬁ ed by shading and ! mark are critical for safety. Replace only with part number speciﬁ ed.

NOTE: Les composants identiﬁ es per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero speciﬁ e.

NOTE: The components identiﬁ ed by a red outline and a mark contain conﬁ dential information. Speciﬁ c instructions must be adhered to whenever these components are repaired and/or replaced. See Appendix A: Encryption Key Components in the back of this manual.

(Check the Sony Electronics Service Information website for any additional service related issues for this model.)

2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3

4-159-298-01 SCREW, +PSW M4X10

101

K

I

J

105

103

H

Lift up Speaker Bracket Left to detach from Bezel

I

Remove screws from Speaker to detach from

Speaker Bracket Left

4 from KDL-32EX700 Only

A

2 from all except KDL-32EX700

J

Disconnect 1 connector from HLR Board

and release from LED Guide

K

Lift left-side Panel Bracket to detach from Panel

C

B

1 from KDL-32EX700/40EX700/40EX703 Only

2 from KDL-46EX700/46EX701/46EX703/52EX700/52EX701/52EX703 ONLY

3 from KDL-60EX700/60EX701/60EX703 Only

H

G

D

F

E

REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]

101 4-169-442-01 BRACKET, PANEL(B) (KDL- 32EX700 ONLY) 101 4-171-196-01 BRACKET, PANEL(A) (ALL EXCEPT KDL- 32EX700))

102 X-2547-771-1 BRACKET,SP(32R) ASSY (KDL- 32EX700 ONLY) 102 X-2547-775-1 BRACKET,SP(40R) ASSY (KDL- 40EX700/40EX703 ONLY) 102 X-2547-779-1 BRACKET,SP(46R) ASSY (KDL-46EX700/46EX701/46EX703 ONLY) 102 X-2547-785-1 BRACKET,SP(52R) ASSY (KDL-52EX700/52EX701/52EX703 ONLY) 102 X-2547-787-1 BRACKET,SP(60R) ASSY (KDL-60EX700/60EX701/60EX703 ONLY)

101

102

103

103 1-826-873-41 LOUDSPEAKER (3.4X17.5CM) 104 X-2547-773-1 BRACKET,SP(32L) ASSY (KDL- 32EX700 ONLY) 104 X-2547-777-1 BRACKET,SP(40L) ASSY (KDL- 40EX700/40EX703 ONLY) 104 X-2547-782-1 BRACKET,SP(46L) ASSY (KDL-46EX700/46EX701/46EX703 ONLY) 104 X-2547-786-1 BRACKET,SP(52L) ASSY (KDL-52EX700/52EX701/52EX703 ONLY) 104 X-2547-788-1 BRACKET,SP(60L) ASSY (KDL-60EX700/60EX701/60EX703 ONLY)

105 A-1744-405-A HLR BOARD, MOUNTED

104

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 15 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

DISASSEMBLY/PART NUMBER INFORMATION

1-4. GE3-A/GE2-A/GE2-B (POWER) BOARDS, BAL BOARD, HMS2 BOARD,

AND LCD PANEL REMOVAL

A

Remove screws from Power Boards

4 from GE3-A Board (KDL-32EX700/40EX700/40EX703 Only)

4 from GE2-B Board (KDL-46EX700/46EX701/46EX703/52EX700/52EX701/52EX703 Only)

5 from GE2-A Board (KDL-60EX700/60EX701/60EX703 Only)

B

Disconnect 5 connectors from Power Boards

C

Remove 4 screws from BAL Board

D

Disconnect 5 connectors from BAL Board

E

Slide Side Jack Bracket to right-side to remove from BAL Board

F

Lift HMS2 Board to detach from Bezel

G

Slide-out Lens to detach from Bezel

H

Carefully Lift up Panel to remove from Bezel

NOTE: The components identiﬁ ed by shading and ! mark are critical for safety. Replace only with part number speciﬁ ed.

NOTE: Les composants identiﬁ es per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero speciﬁ e.

NOTE: The components identiﬁ ed by a red outline and a mark contain conﬁ dential information. Speciﬁ c instructions must be adhered to whenever these components are repaired and/or replaced. See Appendix A: Encryption Key Components in the back of this manual.

(Check the Sony Electronics Service Information website for any additional service related issues for this model.)

1-4-1. KDL-32EX700/40EX700/40EX703

2-580-592-01 SCREW, +PSW M3X8

151

154

153

152

155

156

157

F

G

H

B

A

C

E

REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]

151 X-2541-866-1 BEZEL(32) ASSY (KDL- 32EX700 ONLY) 151 X-2541-867-1 BEZEL(40) ASSY (KDL- 40EX700 ONLY)

D

151 X-2547-169-1 BEZEL(40) ASSY (KDL- 40EX703 ONLY) 152 A-1736-860-A HMS2 BOARD, MOUNTED

153 1-856-068-11 LENS 154 N/A LCD PANEL FOR ALL LCD PANEL PART NUMBER INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL 155 4-171-117-01 BRACKET, SIDE JACK M

156 A-1763-462-A BAL BOARD, COMPLETE NOTE: For BAL Board replacement, please refer to section 2-2. Setting the Destination after Replacing the BAL Board or LCD Panel. NOTE: Final software is not installed on this BAL Board. Install the update after replacing this board using the instructions provided with the software.

157 1-474-213-11 GE3-A (POWER) BOARD, COMPLETE

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 16 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

DISASSEMBLY/PART NUMBER INFORMATION

1-4-2. KDL-46EX700/46EX701/46EX703

161

162

163

164

165

NOTE: The components identiﬁ ed by shading and ! mark are critical for safety. Replace only with part number speciﬁ ed.

NOTE: Les composants identiﬁ es per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero speciﬁ e.

NOTE: The components identiﬁ ed by a red outline and a mark contain conﬁ dential information. Speciﬁ c instructions must be adhered to whenever these components are repaired and/or replaced. See Appendix A: Encryption Key Components in the back of this manual.

(Check the Sony Electronics Service Information website for any additional service related issues for this model.)

1-4-3. KDL-52EX700/52EX701/52EX703

171

174

173

172

175

166

167

REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]

161 X-2541-868-1 BEZEL(46) ASSY (KDL-46EX700 ONLY) 161 X-2548-036-1 BEZEL(46) ASSY (KDL-46EX701 ONLY) 161 X-2547-170-1 BEZEL(46) ASSY (KDL-46EX703 ONLY) 162 A-1736-860-A HMS2 BOARD, MOUNTED 163 1-856-068-11 LENS

164 N/A LCD PANEL FOR ALL LCD PANEL PART NUMBER INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL 165 4-171-117-01 BRACKET, SIDE JACK M

166 A-1763-462-A BAL BOARD, COMPLETE NOTE: For BAL Board replacement, please refer to section 2-2. Setting the Destination after Replacing the BAL Board or LCD Panel. NOTE: Final software is not installed on this BAL Board. Install the update after replacing this board using the instructions provided with the software.

167 1-474-212-11 GE2-B (POWER) BOARD, COMPLETE

171 X-2541-869-1 BEZEL(52) ASSY (KDL-52EX700 ONLY) 171 X-2547-166-1 BEZEL(52) ASSY (KDL-52EX701 ONLY) 171 X-2547-171-1 BEZEL(52) ASSY (KDL-52EX703 ONLY) 172 A-1736-860-A HMS2 BOARD, MOUNTED 173 1-856-068-11 LENS

177

174 N/A LCD PANEL FOR ALL LCD PANEL PART NUMBER INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL

175 4-171-117-01 BRACKET, SIDE JACK M

176 A-1763-462-A BAL BOARD, COMPLETE NOTE: For BAL Board replacement, please refer to section 2-2. Setting the Destination after Replacing the BAL Board or LCD Panel. NOTE: Final software is not installed on this BAL Board. Install the update after replacing this board using the instructions provided with the software.

177 1-474-212-11 GE2-B (POWER) BOARD, COMPLETE

176

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 17 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

DISASSEMBLY/PART NUMBER INFORMATION

1-4-4. KDL-60EX700/60EX701/60EX703

181

183

182

184

185

NOTE: The components identiﬁ ed by shading and ! mark are critical for safety. Replace only with part number speciﬁ ed.

REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]

181 X-2541-870-1 BEZEL(60) ASSY

(Check the Sony Electronics Service Information website for any additional service related issues for this model.)

1-6. SCREW LEGEND

(KDL-60EX700 ONLY) 181 X-2547-167-1 BEZEL(60) ASSY (KDL-60EX701 ONLY) 181 X-2547-172-1 BEZEL(60) ASSY (KDL-60EX703 ONLY) 182 A-1736-860-A HMS2 BOARD, MOUNTED

183 1-856-068-11 LENS 184 N/A LCD PANEL FOR ALL LCD PANEL PART NUMBER INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL 185 4-171-117-01 BRACKET, SIDE JACK M

186 A-1763-462-A BAL BOARD, COMPLETE NOTE: For BAL Board replacement, please refer to section 2-2. Setting the Destination after Replacing the BAL Board or LCD Panel. NOTE: Final software is not installed on this BAL Board. Install the update after replacing this board using the instructions provided with the software.

187 1-474-211-11 GE2-A (POWER) BOARD, COMPLETE

NOTE: Les composants identiﬁ es per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero speciﬁ e.

NOTE: The components identiﬁ ed by a red outline and a mark contain conﬁ dential information. Speciﬁ c instructions must be adhered to whenever these components are repaired and/or replaced. See Appendix A: Encryption Key Components in the back of this manual.

1-6-1. KDL-32EX700

P/N DESCRIPTION REMARKS TOTAL

Š

2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3

š 2-580-611-01 SCREW, +PSW M6X16 Ť

2-580-600-01 SCREW, +PSW M4X8

ť

2-580-608-01 SCREW, +PSW M5X16

Ū

2-580-592-01 SCREW, +PSW M3X8

Ũ

4-159-298-01 SCREW, +PSW M4X10

2-580-591-01 SCREW, +PSW M3X5

ŭ

7-685-646-79

Ŭ

Ţ

2-580-603-01 SCREW, +PSW M4X16

SCREW, +BVTP 3X8 TYPE2 IT-3 RC to TRMNL AREA(1) 1

RC(10), BTM FRM to BEZ(2), SPKR to SPKR BRKT-L(4), SPKR to SPKR BRKT-R(4) 20

RC to VESA BRKT(4) 4

RC to PNL to PNL BRKT(2) 2

TABLE-TOP STAND(4) 4

BAL(4), GE3-A(4) 8

BTM FRM to PNL(2), VESA BRKT to PNL(2) 4

RC to PNL(3) 3

NOT IN THIS MODEL 0

1-6-2. KDL-40EX700/40EX703

P/N DESCRIPTION REMARKS TOTAL

Š

2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3

š 2-580-611-01 SCREW, +PSW M6X16 Ť

2-580-600-01 SCREW, +PSW M4X8

ť

2-580-608-01 SCREW, +PSW M5X16

Ū

2-580-592-01 SCREW, +PSW M3X8

Ũ

4-159-298-01 SCREW, +PSW M4X10

2-580-591-01 SCREW, +PSW M3X5

ŭ

7-685-646-79

Ŭ

Ţ

2-580-603-01 SCREW, +PSW M4X16

SCREW, +BVTP 3X8 TYPE2 IT-3 RC to TRMNL AREA(1) 1

RC(10), BTM FRM to BEZ(2), SPKR to SPKR BRKT-L(2), SPKR to SPKR BRKT-R(2) 16

RC to VESA BRKT(4) 4

NOT IN THIS MODEL 0

TABLE-TOP STAND(4) 4

BAL(4), GE3-A(4) 8

BTM FRM to PNL(1), UC to BTM FRM(5), VESA BRKT to PNL(2) 8

RC to PNL(3) 3

RC to PNL to PNL BRKT(2) 2

1-5. CLEANING THE LCD PANEL

CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.

Clean the cabinet of the TV with a dry soft cloth.

ipe the LCD screen gently with a soft cloth.

W

Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm

water.

If using a chemically pretreated cloth, please follow the instruction provided on the package.

Never use strong solvents such as a thinner, alcohol or benzine for cleaning.

Periodic vacuuming of the ventilation openings is recommended to ensure the proper ventilation.

187

186

1-6-3. KDL-46EX700/46EX701/46EX703

P/N DESCRIPTION REMARKS TOTAL

Š

2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3

š 2-580-611-01 SCREW, +PSW M6X16 Ť

2-580-600-01 SCREW, +PSW M4X8

ť

2-580-608-01 SCREW, +PSW M5X16

Ū

2-580-592-01 SCREW, +PSW M3X8

Ũ

4-159-298-01 SCREW, +PSW M4X10

2-580-591-01 SCREW, +PSW M3X5

ŭ

7-685-646-79

Ŭ

Ţ

2-580-603-01 SCREW, +PSW M4X16

SCREW, +BVTP 3X8 TYPE2 IT-3 RC to TRMNL AREA(1) 1

RC(10), BTM FRM to BEZ(2), SPKR to SPKR BRKT-L(2), SPKR to SPKR BRKT-R(2) 16

RC to VESA BRKT(4) 4

NOT IN THIS MODEL 0

TABLE-TOP STAND(4) 4

BAL(4), GE2-B(4) 8

BTM FRM to PNL(1), UC to BTM FRM(5), VESA BRKT to PNL(2) 8

RC to PNL(3) 3

RC to PNL to PNL BRKT(4) 4

1-6-4. KDL-52EX700/52EX701/52EX703

P/N DESCRIPTION REMARKS TOTAL

Š

2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3

š 2-580-611-01 SCREW, +PSW M6X16 Ť

2-580-600-01 SCREW, +PSW M4X8

ť

2-580-608-01 SCREW, +PSW M5X16

Ū

2-580-592-01 SCREW, +PSW M3X8

Ũ

4-159-298-01 SCREW, +PSW M4X10

2-580-591-01 SCREW, +PSW M3X5

ŭ

7-685-646-79

Ŭ

Ţ

2-580-603-01 SCREW, +PSW M4X16

SCREW, +BVTP 3X8 TYPE2 IT-3 RC to TRMNL AREA(1) 1

RC(12), BTM FRM to BEZ(2), SPKR to SPKR BRKT-L(2), SPKR to SPKR BRKT-R(2) 18

RC to VESA BRKT(4) 4

NOT IN THIS MODEL 0

TABLE-TOP STAND(4) 4

BAL(4), GE2-B(4) 8

BTM FRM to PNL(1), UC to BTM FRM(5), VESA BRKT to PNL(2) 8

RC to PNL(4) 4

RC to PNL to PNL BRKT(4) 4

1-6-5. KDL-60EX700/60EX701/60EX703

P/N DESCRIPTION REMARKS TOTAL

Š

2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3

š 2-580-611-01 SCREW, +PSW M6X16 Ť

2-580-600-01 SCREW, +PSW M4X8

ť

2-580-608-01 SCREW, +PSW M5X16

Ū

2-580-592-01 SCREW, +PSW M3X8

Ũ

4-159-298-01 SCREW, +PSW M4X10

2-580-591-01 SCREW, +PSW M3X5

ŭ

7-685-646-79

Ŭ

Ţ

2-580-603-01 SCREW, +PSW M4X16

SCREW, +BVTP 3X8 TYPE2 IT-3 RC to TRMNL AREA(1) 1

RC(12), BTM FRM to BEZ(2), SPKR to SPKR BRKT-L(2), SPKR to SPKR BRKT-R(2), SPKR BRKT to BEZ(4) 22

RC to VESA BRKT(4) 4

NOT IN THIS MODEL 0

TABLE-TOP STAND(4) 4

BAL(4), GE2-A(5), AC INLET to BTM FRM(1) 10

BTM FRM to PNL(2), UC to BTM FRM(4), VESA BRKT to PNL(2) 8

RC to PNL(4) 4

RC to PNL to PNL BRKT(6) 6

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 18 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

DISASSEMBLY/PART NUMBER INFORMATION

NOTE: The components identiﬁ ed by shading and ! mark are critical for safety. Replace only with part number speciﬁ ed.

(Check the Sony Electronics Service Information website for any additional service related issues for this model.)

1-7. CONNECTORS

1-7-1. KDL-32EX700 1-7-2. KDL-40EX700/40EX703

204

GE3A

201

BAL

NOTE: Les composants identiﬁ es per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero speciﬁ e.

254

GE3A

NOTE: The components identiﬁ ed by a red outline and a mark contain conﬁ dential information. Speciﬁ c instructions must be adhered to whenever these components are repaired and/or replaced. See Appendix A: Encryption Key Components in the back of this manual.

251

BAL

203

HMS2

REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]

201 1-837-790-11 (LVDS) LEAD WIRE WITH CONNECTOR 202 1-910-100-16 HARNESS ASSY (1)

202

HLR

203 1-837-663-12 CONNECTOR ASSY 204 1-910-100-17 HARNESS ASSY (2)

252

253

HMS2

REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]

251 1-837-704-11 (LVDS) FLEXIBLE FLAT CABLE 51P 252 1-910-100-18 HARNESS ASSY (1)

253 1-837-665-12 CONNECTOR ASSY 254 1-910-100-19 HARNESS ASSY (2)

HLR

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 19 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

DISASSEMBLY/PART NUMBER INFORMATION

1-7-3. KDL-46EX700/46EX701/46EX703

304

GE2B

301

BAL

NOTE: The components identiﬁ ed by shading and ! mark are critical for safety. Replace only with part number speciﬁ ed.

(Check the Sony Electronics Service Information website for any additional service related issues for this model.)

1-7-4. KDL-52EX700/52EX701/52EX703

354

GE2B

351

BAL

NOTE: Les composants identiﬁ es per un trame et une marque ! sont critiques pour la securite. Ne les remplacer que par une piece portant le numero speciﬁ e.

NOTE: The components identiﬁ ed by a red outline and a mark contain conﬁ dential information. Speciﬁ c instructions must be adhered to whenever these components are repaired and/or replaced. See Appendix A: Encryption Key Components in the back of this manual.

1-7-5. KDL-60EX700/60EX701/60EX703

GE2A

401

402

BAL

303

HMS2

REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]

301 1-837-705-11 (LVDS) FLEXIBLE FLAT CABLE 51P 302 1-910-100-20 HARNESS ASSY (1) 303 1-837-666-12 CONNECTOR ASSY 304 1-910-100-21 HARNESS ASSY (2)

302

HLR

353

HMS2

REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]

351 1-837-706-11 (LVDS) FLEXIBLE FLAT CABLE 51P 352 1-910-100-22 HARNESS ASSY (1) 353 1-837-667-12 CONNECTOR ASSY 354 1-910-100-23 HARNESS ASSY (2)

352

HLR

404

403

* 401 1-837-710-11 (LVDS) FLEXIBLE FLAT CABLE 51P * 402 1-910-100-24 HARNESS ASSY (1) * 403 1-910-100-25 HARNESS ASSY (2) * 404 1-837-532-12 CONNECTOR ASSY

HMS2

HLR

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 20 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

DISASSEMBLY/PART NUMBER INFORMATION

1-8. ACCESSORIES AND PACKAGING

3-299-071-03 FLYER, SAFETY

4-178-827-12 MANUAL, INSTRUCTION (ENGLISH VERSION) 4-178-827-22 MANUAL, INSTRUCTION (FRENCH VERSION)

4-178-827-32 MANUAL, INSTRUCTION (SPANISH VERSION) (KDL- 32EX700/40EX700/46EX700/52EX700/60EX700 ONLY)

4-171-791-12 MANUAL, INSTRUCTION (ENGLISH VERSION) (KDL-46EX701/52EX701/60EX701 ONLY)

! 1-837-633-11 POWER-SUPPLY CORD (KDL-60EX700/60EX701/60EX703 ONLY) ! 1-837-644-11 POWER-SUPPLY CORD SET (KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/52EX700/52EX701/52EX703 ONLY)

* 4-180-033-11 SUPPLEMENT(STAND INSTALLATION)

1-837-549-12 UWA-BR100 EXTENTION CABLE (KDL-46EX701/52EX701/60EX701 ONLY) 1-487-779-11 UWA-BR100U UNIT (KDL-46EX701/52EX701/60EX701 ONLY)

1-9. MISCELLANEOUS

4-182-211-01 GASKET X-2348-140-3 SUPPORT BELT KIT 4-182-212-01 SPACER (ALL EXCEPT KDL-32EX700) 4-186-417-01 SPACER, PANEL (KDL-40EX700/40EX703/46EX700/46EX701/46EX703 ONLY)

7-632-452-24 TAPE (NO.303) 18MMX35M YEL 4-187-297-01 WASHER (LCD)

1-10. REMOTE COMMANDER

1-487-767-11 REMOTE COMMANDER (RM-YD033) (US MODELS ONLY) 1-487-832-11 REMOTE COMMANDER (RM-YD055) (ALL EXCEPT US MODELS)

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 21 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

SEC 2. SERVICE ADJUSTMENTS

2-1. ACCESSING SERVICE ADJUSTMENT MODE

1. TV must be in Standby Mode. (POWER off).

2. Press the following buttons on the Remote Commander within a second of each other:

DISPLAY

Channel 5 Volume +

POWER

DISPLAY

Onscreen cursor and select button

5

VOLUME+

POWER

DIGITAL SERVICE

001 OP 000 VERS ---

<MAIN> <SUB> DM1.301J00AA SM1.010W00AA M2.105C SB1.000W00AA DD1.016J00AA SD1.010W00AA (DM1.3 01J00AA) RF01.05 WP00.521J00AA ID1C117081 ID1C117081 LTY320AB01 PID04020000 WF:2.0.0.99 <BEM> WF:0B BM1.012W00LU Camera FW BB1.000W00LU Camera FW BD1.011J46LUX

---.---------

Sample Service Menu

RM-YD033

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 22 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

SERVICE ADJUSTMENTS

2-1-1. VIEWING THE SERVICE MENUS

Use the Remote Commander to view the Digital, Chassis and Sub Service Menus and their options.

3. To display the Service Menu that contains the Category you want to adjust, press Commander.

DIGITAL SERVICE

001 OP 000 VERS ---

<MAIN> <SUB> DM1.301J00AA SM1.010W00AA M2.105C SB1.000W00AA DD1.016J00AA SD1.010W00AA (DM1.3 01J00AA) RF01.05 WP00.521J00AA ID1C117081 ID1C117081 LTY320AB01 PID04020000 WF:2.0.0.99 <BEM> WF:0B BM1.012W00LU Camera FW BB1.000W00LU Camera FW BD1.011J46LUX

Sample Digital Service Menu

CHASSIS 000 CXD2813R 000 H_DET_NOSIG_CNT 1

JUMP

press

OPTIONS

or

---.---------

JUMP

OPTIONS

on the Remote

Within each Service Menu are Categories and data information.

Item name

Category name

Data

Item number

Category number

CHASSIS SERVICE 000 CXD2813R 000 H_DET_NOSIG_CNT 1

Sample Chassis Service Menu

2-1-2. USING THE REMOTE COMMANDER TO VIEW OR

CHANGE SERVICE DATA

Use the buttons on the Remote Commander to access the Service Menu items and adjust the Data Values.

DISPLAY

Channel 5 Volume +

4. To change the Category,

2

press press

to move to the Next Category or

5

to go back to the Previous Category.

Note: Pressing 2 or 5 only changes the Categories within

the Service Menu displayed.

5. To change the adjustment item,

1

press

4

to move to the Next Item or

to go back to the Previous Item.

6. To change the Data Value,

press 3 to increase the Data Value or

6

to decrease the Data Value.

7. P r e ss

MUTING

8. To exit service mode, press

then press 0 to Write the changes.

HOME

or turn the TV power off.

POWER

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 23 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

SERVICE ADJUSTMENTS

2-2. ADJUSTMENTS AFTER REPLACING THE BAL BOARD

OR LCD PANEL

The following procedures must be completed after replacing the BAL Board or the LCD panel.

 Update the TV to the latest software version  Select the Model  Select the Destination  Verify model and panel information are correct  Reconnect all cables

2-2-1. UPDATING THE SOFTWARE

After replacing the BAL Board or the LCD Panel, you must update the software to the latest version.

Before you begin

 Disconnect all cables (RF, External input, Ethernet, etc.)

from the TV

Instructions for updating the software are included with the software package. After completing the software update, proceed to “Selecting the Model”.

2-2-2. SELECTING THE MODEL

After replacing the BAL Board or LCD Panel, go into Service Mode to set the Model data value.

1. TV must be in standby mode. (Power off).

2. Access Service Mode. Press the following buttons on the Remote Commander

within a second of each other:

DISPLAY

Channel 5 Volume +

3. Display the DIGITAL Service Menu. NOTE: There are 3 Service Menus for this model, DIGITAL,

CHASSIS, and SUB. If the DIGITAL Service Menu is not displayed, press

JUMP

or

OPTIONS

on the Remote

Commander.

DIGITAL SERVICE

001 OP 000 VERS ---

<MAIN> <SUB> DM1.301J00AA SM1.010W00AA M2.105C SB1.000W00AA DD1.016J00AA SD1.010W00AA (DM1.3 01J00AA) RF01.05 WP00.521J00AA ID1C117081 ID1C117081 LTY320AB01 PID04020000 WF:2.0.0.99 <BEM> WF:0B BM1.012W00LU Camera FW BB1.000W00LU Camera FW BD1.011J46LUX

---.---------

POWER

4. Press 2 to move to the 002 MODEL (Next) category.

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 24 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

SERVICE ADJUSTMENTS

䎧䏄䏗䏄䎃䎹䏄䏏䏘䏈䎦䏒䏇䏈䎃䎱䏄䏐䏈

L

DIGITAL SERVICE 002 MODEL 000 SEG 01: 2a-3

5. Using the table, press 3 to increase the data value or

6

to decrease the data value, to match the model of the TV.

Chassis Model Name

AZ1-LKDL-32EX700 10 3a-0 AZ1AZ1AZ1AZ1AZ1AZ1AZ1AZ1AZ1AZ1AZ1AZ1AZ1AZ1-

KDL-40EX700 10 3a-0 KDL-40EX703 10 3a-0 KDL-40EX707 10 3a-0 KDL-46EX700 10 3a-0 KDL-46EX701 10 3a-0 KDL-46EX703 10 3a-0 KDL-46EX707 10 3a-0 KDL-52EX700 10 3a-0 KDL-52EX701 10 3a-0 KDL-52EX703 10 3a-0 KDL-52EX707 10 3a-0 KDL-60EX700 10 3a-0 KDL-60EX701 10 3a-0 KDL-60EX703 10 3a-0

䎧

DIGITAL SERVICE 002 MODEL 000 SEG

10: 3a-0

Code Name

Data Value

6. Proceed to “Selecting the Destination”.

2-2-3. SETTING THE DESTINATION

After replacing the BAL Board or the LCD Panel, the destination location must be set.

CAUTION: Selecting the incorrect destination may requiring replacing the BAL Board.

DIGITAL SERVICE 002 MODEL 000 SEG

7. P r e ss 1 to move to “001 DEST” sub Category.

10: 3a-0

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 25 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

SERVICE ADJUSTMENTS

2-2-4. VERIFYING THE MODEL AND PANEL INFORMATION

DIGITAL SERVICE 002 MODEL 001 DEST 03: UC (UC grp)

8. Using the table, press 3 to increase the data value or

6

to decrease the data value, to select the destination of the

TV.

GROUP

UC grp

DIGITAL 002 MODEL 001 DEST

DESTINATION

CODE

UC 3 US/CND

LTN-D 16 MX/LATIN AMERICA

DATA

VALUE

SERVICE

03: UC (UC grp)

DESTINATION

Destination

Data Value

CAUTION: Verify the DESTINATION is set correctly before

proceeding to the next step. If another destination Data Value is selected, it may possibly corrupt the software which would require a BAL Board replacement.

After saving the changes to the service data, verify the information.

1. TV must be in standby mode. (Power off).

2. Access Service Mode. Press the following buttons on the Remote Commander

within a second of each other:

DISPLAY

Channel 5 Volume +

POWER

3. Display the DIGITAL Service Menu. NOTE: There are 3 Service Menus for this model, DIGITAL,

CHASSIS, and SUB. If the DIGITAL Service Menu is not displayed, press

JUMP

or

OPTIONS

on the Remote

Commander.

DIGITAL S ERVICE

001 OP 000 VERS ---

<MAIN> <SUB> DM1.301J00AA SM1.010W00AA M2.105C SB1.000W00AA DD1.016J00AA SD1.010W00AA (DM1.3 01J00AA) RF01.05 WP00.521J00AA ID1C117081

2577318E

Model ID

Product ID

ID

40520000

PID WF:2.0.0.99 <BEM> WF:0B BM1.012W00LU Camera FW BB1.000W00LU Camera FW BD1.011J46LUX

LK315D3LA4S

---.---------

Panel Code

9. After verifying the destination data value displays, press 0 to save (Write) the changes.

10. Exit Service Mode by pressing

HOME

or

4. Using the table, verify the Model ID and the Product ID match the information in the Service Menu.

turn the TV power off.

11. Proceed to “Verifying the Model and Panel Information”.

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 26 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

SERVICE ADJUSTMENTS

Model Name Model ID Product ID Panel ID

KDL-32EX700 2577318E 40520000 LK315D3LA4S KDL-32EX700 2577318E 40520000 LK320D3LEDE120 KDL-32EX700 2577318E 0C520000 LK315D3LA4S KDL-32EX700 2577318E 0C520000 LK320D3LEDE120 KDL-40EX700 2577361B 30520000 LK400D3LA4S KDL-40EX700 2577361B 30520000 LK400D3LEDE120 KDL-40EX700 2577319B 40520000 LK400D3LA4S KDL-40EX700 2577319B 40520000 LK400D3LA4T KDL-40EX700 2577319B 40520000 LK400D3LEDE120 KDL-40EX700 2577319B 0C520000 LK400D3LA4S KDL-40EX700 2577319B 0C520000 LK400D3LA4T KDL-40EX700 2577319B 0C520000 LK400D3LEDE120 KDL-40EX703 2577319B 0C520000 LK400D3LA4S KDL-40EX703 2577319B 0C520000 LK400D3LA4T KDL-40EX703 2577319B 0C520000 LK400D3LEDE120 KDL-46EX700 2577361C 30520000 LK460D3LA8S KDL-46EX700 2577361C 30520000 LK460D3LA8T KDL-46EX700 2577361C 30520000 LK460D3LEDE120 KDL-46EX700 25773626 30520000 LTY(Z)460HJ02 KDL-46EX700 2577319C 40520000 LK460D3LA8S KDL-46EX700 2577319C 40520000 LK460D3LA8T KDL-46EX700 2577319C 40520000 LK460D3LEDE120 KDL-46EX700 257731A6 40520000 LTY(Z)460HJ02 KDL-46EX700 2577319C 0C520000 LK460D3LA8S KDL-46EX700 2577319C 0C520000 LK460D3LA8T KDL-46EX700 2577319C 0C520000 LK460D3LEDE120 KDL-46EX700 257731A6 0C520000 LTY(Z)460HJ02 KDL-46EX701 2577319C 0C520000 LK460D3LA8S KDL-46EX701 2577319C 0C520000 LK460D3LA8T KDL-46EX701 2577319C 0C520000 LK460D3LEDE120 KDL-46EX701 257731A6 0C520000 LTY(Z)460HJ02

Model Name Model ID Product ID Panel ID

KDL-46EX703 2577319C 0C520000 LK460D3LA8S KDL-46EX703 2577319C 0C520000 LK460D3LA8T KDL-46EX703 2577319C 0C520000 LK460D3LEDE120 KDL-46EX703 257731A6 0C520000 LTY(Z)460HJ02 KDL-52EX700 2577361D 30520000 LK520D3LB1S KDL-52EX700 2577361D 30520000 LK520D3LEDE120 KDL-52EX700 2577319D 40520000 LK520D3LB1S KDL-52EX700 2577319D 40520000 LK520D3LEDE120 KDL-52EX700 2577319D 0C520000 LK520D3LB1S KDL-52EX700 2577319D 0C520000 LK520D3LEDE120 KDL-52EX701 2577319D 0C520000 LK520D3LB1S KDL-52EX701 2577319D 0C520000 LK520D3LEDE120 KDL-52EX703 2577319D 0C520000 LK520D3LB1S KDL-52EX703 2577319D 0C520000 LK520D3LEDE120 KDL-60EX700 2577361A 30520000 LK600D3LA5S KDL-60EX700 2577319A 40520000 LK600D3LA5S KDL-60EX700 2577319A 0C520000 LK600D3LA5S KDL-60EX701 2577319A 0C520000 LK600D3LA5S KDL-60EX703 2577319A 0C520000 LK600D3LA5S

5. Exit Service Mode by pressing

HOME

or turn the TV power

off.

6. Proceed to “Reconnecting All Cables”.

2-2-5. RECONNECTING ALL CABLES

After completing the changes to service mode, reconnect all the cables (RF, External input, Ethernet, etc.) to the TV then verify the TV set picture. If necessary, proceed to “White Balance Adjustments”.

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 27 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

SERVICE ADJUSTMENTS

2-3. WHITE BALANCE ADJUSTMENTS

White Balance adjustment data is located on the Digital Service Menu.

1. TV must be in Standby Mode. (POWER off).

2. Press the following buttons on the Remote Commander within a second of each other:

DISPLAY

NOTE: If the Digital Service Menu is not displayed, press

JUMP

3 Press 2 to move to “006 WB” Category.

Channel 5 Volume +

or

OPTIONS

DIGITAL SERVICE

006 WB

000 WHITE_BALANCE ___

.

POWER

5. To select the White Balance Adjustment setting that needs to be changed, do the following:

a. To select R_DRV, press

1

.

b. To select G_DRV, press 2.

c. To select B_DRV, press 3.

4

d. To select R_BKG, press

.

e To select G_BKG, press 5.

f. To select B_BKG, press 6.

6. After selecting the White Balance setting, press

ENT

to

display the edit screen.

The screen displays a “Please input WB items” message.

DIGITAL SERVICE

WB

*1 R_DRV 128

2 G_DRV 128

3 B_DRV 128

4 R_BKG 128

5 G_BKG 128

6 B_BKG 128

Gain

0: x 0.5, 128: x 1, 255: x1.5

Offset

128: offset 0

Please input WB items

(0 - 255)

---

7. Using the numbers buttons on the remote, enter the Data

4. Press 0 to enter White Balance Adjustment mode.

Value for the White Balance setting (value must be between 1 and 255).

8. Press

9. To exit White Balance Adjustment, press

to WRITE (save) the changes.

ENT

JUMP

or

OPTIONS

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 28 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

SERVICE ADJUSTMENTS

2-4. RESETTING THE TV TO FACTORY CONDITION

Use the following instructions to restore the User Adjustments and Channel Memory settings to the preset factory conditions.

1. While holding down the on the Remote Commander, press the POWER button on the TV Switch Unit of the set.

The set restarts and displays the Initial Setup screen. This

may take several minutes.

2-4-1. RESETTING THE TV TO FACTORY CONDITION USING

SERVICE MODE

1. TV must be in Standby Mode. (POWER off).

2. Press the following buttons on the Remote Commander within a second of each other:

DISPLAY

3. If necessary, press mode.

4. Press 8.

“SERVICE” changes to green RST.

5. Press

RST executes the command and displays EXE.

6. Press 0 .

EXE-RST displays green, then red indicating the TV is

writing the data.

7. When the process is complete the green SERVICE text displays and the LED display as shown below:

8. Cycle AC Power (Unplug and Plug AC Cord from the AC Outlet).

9. The set restarts and displays the Initial Setup screen. This may take several minutes.

Channel 5 Volume +

JUMP

MUTING

TIMER Standby POWERTIMER Standby POWER

.

or

OPTIONS

to go to DIGITAL

POWER

.

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 29 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

SEC 3. DIAGRAMS

3-2. BLOCK DIAGRAM

DIAGRAMS

Tuner

AV3 (Side)

Component

PC

HDMI1

HDMI2(side)

HDMI3(Side)

HDMI4

HDMI5

㪦㫅㫃㫐㩷㪽㫆㫉㩷㪙㪛㩷㫄㫆㪻㪼㫃㩷

ETHER

USB

SP OUT

LINE OUT

SPDIF OUT

㩿㪠㫅㫋㪼㫉㫅㪸㫃㪀

TU_CVBS TU_L/R

D_IF

TS

Side_CVBS Side_L/R

COMP_Y/PB/PR

COMP_L/R

PC_RGB

PC_L/R

HDMI1_TMDS HDMI1_I2C

HDMI2_TMDS HDMI2_I2C

HDMI3_TMDS HDMI3_I2C

HDMI4_TMDS HDMI4_I2C

HDMI5_TMDS HDMI5_I2C

TITAN

DiSEqC

D Amp

[TAS5707

NLD

Tcon Board

TCON

2b-1

TS

Video

SW

[CXA2241]

SCL0/SDA0

MAIN_CVBS

SCL2/SDA2

LVDS VIDEO

DIMMER_C T R L

LVDS

PEH QDL

PEM

QDL TCON

2b-2

SW Debug

[MIMAS]

CEC

ARC

]

Audio

SW DAC AMP

[In la y]

HDMI SW / E Q [SPADE]

USB HUB

[NEC]

PHY

[MICREL ]

HDMI_TMDS

HDMI_SCL/SDA

㪬㪪㪙㪉㪅㪇

SPDIF_OUT

MUXOUT_L/R

HP/LINEOUT_L/R

TVOUT_L/R

SCL1/SDA1

EMMA3TL2

PANEL_SCL/SDA

SPI

UART2_TXD/RXD

UART1_TXD/RXD UART0_TXD/RXD

EEP

TV_TXD/RXD

RS232_TXD/RXD

Mimas

[MB91F313]

Temp Sensor

Power

RF_TXD/RXD

DEVICE_SCL/SDA

DEBUG I/F

HOTEL CN

MS

PEL2

㪦㪩

SPEL TCON

3a-0/3a-1

SONY Logo

Presence Sensor

RGB Sensor

Blind Touch Key

H Board

WiFi

OneNAND

1Gb

DDR2

1Gb x2

JTAG

Camera

BD

Analog Video Analog Audio

I2C

BAL Board

Digital Video Digital AudioUART

Eco Switch

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 35 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

English

9-888-268-03

Sony Corporation

Sony Technology Center

Technical Services

Service Promotion Department

2010AJ74WEB-1

Printed in USA

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 36 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703

Sony 40EX700, 52EX701, 32EX700, 46EX700, 46EX701 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

MODEL LIST

TABLE OF CONTENTS

SPECIFICATIONS

WARNINGS AND CAUTIONS

SAFETY-RELATED WARNING

SAFETY CHECK-OUT

SELF DIAGNOSIS FUNCTIONS

SEC 1. DISASSEMBLY/PART NUMBER INFORMATION

1-1. TABLE-TOP STAND ASSEMBLY REMOVAL

1-2. REAR COVER, SWITCH UNIT, AND POWER SWITCH REMOVAL

1-2-1. KDL-32EX700 AND KDL-40EX700/40EX703

1-2-2. KDL-46EX700/46EX701/46EX703 AND KDL-52EX700/52EX701/52EX703 1-2-3. KDL-60EX700/60EX701/60EX703

1-3. SPEAKERS, HLR BOARD, AND LCD PANEL BRACKETS REMOVAL

1-4-1. KDL-32EX700/40EX700/40EX703

1-4-2. KDL-46EX700/46EX701/46EX703

1-4-3. KDL-52EX700/52EX701/52EX703

1-4-4. KDL-60EX700/60EX701/60EX703

1-6. SCREW LEGEND

1-6-1. KDL-32EX700

1-6-2. KDL-40EX700/40EX703

1-5. CLEANING THE LCD PANEL

1-6-3. KDL-46EX700/46EX701/46EX703

1-6-4. KDL-52EX700/52EX701/52EX703

1-6-5. KDL-60EX700/60EX701/60EX703

1-7. CONNECTORS

1-7-1. KDL-32EX700 1-7-2. KDL-40EX700/40EX703

1-7-3. KDL-46EX700/46EX701/46EX703

1-7-4. KDL-52EX700/52EX701/52EX703

1-7-5. KDL-60EX700/60EX701/60EX703

1-8. ACCESSORIES AND PACKAGING

1-9. MISCELLANEOUS

1-10. REMOTE COMMANDER

SEC 2. SERVICE ADJUSTMENTS

2-1. ACCESSING SERVICE ADJUSTMENT MODE

2-1-1. VIEWING THE SERVICE MENUS

2-2-1. UPDATING THE SOFTWARE

2-2-2. SELECTING THE MODEL

2-2-3. SETTING THE DESTINATION

2-2-4. VERIFYING THE MODEL AND PANEL INFORMATION

2-2-5. RECONNECTING ALL CABLES

2-3. WHITE BALANCE ADJUSTMENTS

2-4. RESETTING THE TV TO FACTORY CONDITION

SEC 3. DIAGRAMS

3-1. CIRCUIT BOARDS LOCATION

3-1-1. KDL-32EX700

3-1-2. KDL-40EX700/40EX703

3-1-3. KDL-46EX700/46EX701/46EX703

3-1-4. KDL-52EX700/52EX701/52EX703

3-1-5. KDL-60EX700/60EX701/60EX703

3-2. BLOCK DIAGRAM