The model and serial numbers are
located at the side and rear of the TV.
Record these numbers in the spaces
provided below. Refer to them
whenever you call upon your Sony
dealer regarding this TV.
Model Name
Serial No.
CAUTION
To prevent electr ic shock and blade exposure,
do not use this polarized AC plug with an
extension cord, receptacle or other outlet
unless the blades can be fully inserted.
• 120 V AC, 60 Hz
• Avoid operating the TV at
temperatures below 41°F (5°C).
Licensing Information
Macintosh is a trademark of Apple Inc.,
registered in the U.S. and other countries.
HDMI, the HDMI logo and High-De finition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing,
LLC.
Fergason Patent Properties, LLC:
U.S. Patent No. 5,717, 422
U.S. Patent No. 6,816, 141
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
In the United States, TV Guide and TV Guide
On Screen are registered trademarks of TV
Guide Entertainment Group, Inc. and/or its
subsidiaries or affiliates, and are us ed under a
license by Gemstar-TV Guide International,
Inc. and/or its subsidiaries. In Canada, TV
Guide is a registered mark of
Transcontinental Inc., and is used under a
license by Gemstar-TV Guide International,
Inc. and/or its subsidiaries.
The TV Guide On Screen system is
manufactured under license from GemstarTV Guide International, Inc. and/or its
subsidiaries.
The TV Guide On Screen system is protected
by one or more of the following United States
patents 6,498,895; 6,850,693; 6,396,546;
5,940,073; 6,239,794 to Gemstar-TV Guide
International, Inc. and/or its subsidiaries.
Gemstar-TV Guide International, Inc. and/or
its related affiliates are not in any way liable
for the accuracy or availability of the program
schedule information or other data in the TV
Guide On Screen system and cannot
guarantee service availability in your area. In
no event shall Gemstar-TV Guide
International, Inc. and/or its related affiliates
be liable for any damages in connection with
the accuracy or availability of the program
schedule information or other data in the TV
Guide On Screen system.
Blu-ray Disc is a trademark.
“BRAVIA” and , S-Force,
Motionflow, BRAVIA Sync, and are
trademarks or registered marks of Sony
Corporation.
“XrossMediaBar” is a trademark of Sony
Corporation. “XMB” is a trademark of Sony
Corporation and Sony Computer
Entertainment Inc.
“PlayStation” is a registered trademark and
“PS3” is a trademark of Sony Computer
Entertainment Inc.
®
, the DLNA Logo and DLNA
DLNA
CERTIFIED™ are trademarks, service
marks, or certification marks of the Digital
Living Network Alliance.
Your BRAVIA TV is
ENERGY STAR
in the “Home” mode.
It meets strict energy
efficiency guidelines set by
the U.S. Environmental
Protection Agency and
Department of Energy. ENERGY STAR is a
joint program of these government agencies,
designed to promote energy efficient products
and practices.
Changes to certain features, settings, and
functionalities of this TV (i.e. TV Guide,
Picture/Sound, Light Sensor, Power Savings)
can increase or change the power
consumption.
Depending upon such changed settings, the
power consumption may exceed the limits
required for the ENERGY STAR
qualification in the “Home” mode.
The 22 class has a 21.6 inch viewable
image size, the 32 class has a 31.5 inch
viewable image size and the 55 class has
a 54.6 inch viewable image size
(measured diagonally).
®
qualified
~
• The illustrations of the remote
control used in this manual are of the
RM-YD033 unless otherwise stated.
The BRAVIA® Full HDTV Experience
Thank you for choosing Sony! Your new BRAVIA® TV
opens the door to the “Full HDTV Experience.” This
document will help you get the most out of your TV.
• Operating instructions are built into your BRAVIA TV. Refer to “To use i-Manual” for operation
(page 15).
• Retain this manual for future reference.
3
Checking the accessories
AC power cord (1)
(for KDL-55HX701/KDL-46HX701 models)
Table-Top Stand (1)*
Fixing screws for Table-Top Stand
(M5 × 16) (4)
Assembling Screws for Table-Top Stand
(M5 × 16) (4)
Assembling Screws for Table-Top Stand
(M4 × 10) (3)
(for KDL-32EX308/KDL-22EX308 models)
Remote control (1)*
Size AAA batteries (2)
USB Wireless LAN Adapter UWA-BR100 (1)
(for KDL-32EX308/KDL-22EX308 models)
*1 The 22", 32" and 40" models require assembling.
Refer to other leaflet to assemble the Table-Top
Stand.
*2 Please refer to the model name printed on the
remote control.
(for KDL-40HX701 model)
1
2
Guidelines for Remote Control
• Point your remote control directly at the IR
sensor located on your TV.
• Make sure that no objects are blocking the
path between the remote control and the IR
sensor on your TV.
• Fluorescent lamps can interfere with your
remote control; try turning off the fluorescent
lamps.
• If you are having problems with the remote
control, reinsert or replace your batteries and
make sure that they are correctly inserted.
Inserting batteries into the
remote control
Slide the cover to open.
4
Setting up your TV
Some TV models are packaged with a detached
Table-Top Stand so you can mount your TV to
a wall right away. If you are not mounting the
TV to a wall, you will need to attach the
Table-Top Stand. You will need a Phillips
screwdriver and the supplied screws to
complete the task. Look for the attachment
instructions provided with the TV.
Be sure to consider the following while setting
up your TV:
• Disconnect all cables when carrying the
TV.
• Carry the TV with the adequate number of
people; larger size TVs require two or more
people.
• Correct hand placement while carrying the
TV is very important for safety and to avoid
damage.
1 Gently slide the TV unit onto the
Table-Top Stand and align the screw
holes.
~
• Do not put stress on the LCD panel or the frame
around the screen.
• Be careful to not pinch your hands or the AC
power cord when you install the TV unit to the
Table-Top Stand.
2 Use the supplied screws to attach the
TV unit to the Table-Top Stand.
Except KDL-22EX308 model
Setting up your TV
• Ensure your TV has adequate ventilation,
see page 13.
• For best picture quality, do not expose the
screen to direct illumination or sunlight.
• Avoid installing the TV in a room with
reflective wall and floor materials.
• Avoid moving the TV from a cold area to a
warm area. Sudden room temperature
changes may cause moisture condensation.
This may cause the TV to show poor picture
and/or poor color. Should this occur, allow
moisture to evaporate completely before
powering the TV on.
Attaching the Table-Top
Stand
Refer to the supplied Table-Top Stand
instruction leaflet for proper attachment for
some TV models.
KDL-22EX308 model only
~
• If you use an electric screwdriver, set the
tightening torque at approximately 1.5 N·m
{15 kgf·cm}.
(Continued)
5
Adjusting the viewing angle
This TV can be adjusted within the angles shown below (except KDL-32EX308 model).
For KDL-55/46/40HX701
6°0°
1
Remove screws
as shown.
~
• Reverse the steps when readjusting the angle back to 0 degree.
2
Lift up and tilt.
3
For KDL-22EX308
8°
8°
4
Install screw into the
top screw hole of the
Table-Top Stand.
Slide in.
6
Connecting the TV
The following chart shows the high-definition (HD) and standard-definition (SD) video formats
supported by your BRAVIA TV inputs.
* For supported PC formats refer to the i-Manual.
Recommendation of the F type plug
Projection of the inner wire from the
connection part must be less than 1.5 mm.
Setting up your TV
1.5 mm
(Continued)
7
Shown with a Set Top Box with HDMI
connection
Shown with a Set Top Box with
COMPONENT connection
Set Top Box
Cable System or VHF/UHF Antenna System
Set Top Box
Cable
or
Antenna
8
Shown with HD BRAVIA® Sync™ Basic Connection
*Rear of TV
SAT
HD Cable Box or
(Dish)
HD Satellite Receiver
*A/V Receiver
AM
* Signifies a BRAVIA Sync capable device.
DVD INSAT INVIDEO 2/BD INOUT
L
RLR
OPT IN
OPT IN
COAX IN AUDIO IN
AUDIO IN AUDIO IN
SAT
VIDEO 1
DVD
FRONT R
FRONT L SUR R SUR L CENTER SUBWOOFER
Cable/
Antenna
*Blu-ray Disc
COMPONENT
VIDEO OUT
VIDEO
OUT
Y
DIGITAL OUT
VIDEO
AC IN
HDMI
OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL OPTICAL
B
B
/
P
C
R
/
R
P
C
S VIDEO
5.1CH OUTPUT
AUDIO
OUT
FRONT REAR CENTER
L
L
R
R
WOOFER
Setting up your TV
Shown with HD Basic Connection with Home Theater System
Rear of TV
Cable/
Antenna
Cable/SAT
(Dish)
SD Cable Box or
SD Satellite Receiver
Home Theater System
Blu-ray Disc/DVD
or
(Continued)
9
Shown with PC Connection with SD VCR/DVD
Rear of TVNotebook PC
or
Splitter
Cable/Antenna
PC
DVDVCR
VCR/DVD Combo
10
Securing the TV
Sony strongly recommends
taking measures to prevent the
TV from toppling over.
Unsecured TVs may topple and
result in property damage,
serious bodily injury or even
death.
Preventing the TV from
Toppling
• Secure the TV to a wall and/or stand.
• Do not allow children to play or climb on
furniture and TV sets.
• Avoid placing or hanging items on the TV.
• Never install the TV on:
– slippery, unstable and/or uneven surfaces.
– furniture that can easily be used as steps,
such as a chest of drawers.
• Install the TV where it cannot be pulled,
pushed, or knocked over.
• Route all AC power cords and connecting
cables so that they are not accessible to
curious children.
Recommended Measures to
Secure the TV
Consider the following measures when
securing your TV to a TV stand (not supplied).
1 Secure the Stand for the TV
Make sure the TV stand can adequately
support the weight of the TV. Use two angle
braces (not supplied) to secure the stand. For
each angle brace use the appropriate hardware
to:
• Attach one side of the angle brace to the
wall stud.
• Attach the other side to the TV stand.
Angle brace
(not supplied)
2 Secure the TV to the Stand
Use the optional hardware listed below (not
supplied):
• M4 × 16 machine screw (screwed into the
TV’s Table-Top Stand)
• A screw or similar (attach it to the TV
stand)
• Rope or chain (strong enough to support the
weight of the TV). Make sure that there is
no excess slack in the rope or chain.
An alternative way to secure the TV is with an
optional Sony Support Belt Kit.
M4 × 16
machine
screw (not
supplied)
Rope or
chain (not
Screw hole on
the Table-Top
Stand
~
Contact Sony Customer Support to obtain the
optional Support Belt Kit by providing your TV
model name.
• For United States call: 1-800-488-7669 or visit:
www.sony.com/accessories
• For Canada call: 1-877-899-7669
Screw
(not supplied)
supplied)
3 Anchor the TV to the Wall
Anchor the TV to the wall by using bolts, wall
anchor and chain (or rope).
~
• Securing the TV to the stand without securing
the TV and the stand to the wall provides
minimum protection against the TV toppling
over. For further protection, be sure to follow the
three measures recommended.
Anchor bolts (not supplied)
Wallmount
holes
Rope
or
chain
(not
supplied)
Wall-anchor
(not supplied)
Setting up your TV
Stand
11
Organizing the AC power
cord
1 For KDL-55HX701/KDL-46HX701
models only
2 For all models
Running initial setup
POWER
4 Follow the instructions on the screen.
~
• The ENERGY SAVING SWITCH must be
on (z) to set the clock and obtain program
information for the TV Guide.
• Home mode sets the TV to display the settings
optimized for home viewing (this setting is
ENERGY STAR compliant).
5 Select Continue to scan for available
channels and enable the
®
Screen
feature. If you receive channels
from a cable box or satellite receiver
and do not wish to use the TV’s built-in
tuner, select
Selecting
On Screen
Skip.
Skip will disable the TV Guide
feature, which is only
available when the TV’s tuner is used.
~
• If you skip the channel scan while in the setup
menus, TV Guide will be disabled.
TV Guide On
For EX701 series
models only
1 Complete your cable connections
before proceeding with the Initial
Setup.
Connect the TV to your nearest power
outlet.
2 For HX701 series models, check the
ENERGY SAVING SWITCH setting
is on (z).
3 Press POWER on the TV.
When you switch the TV on for the first
time, the Language menu appears on
the screen.
12
Detaching the Table-Top
Stand from the TV
Remove only the screws marked with on
the TV.
~
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
Using a Wall-Mount Bracket
Your TV can be mounted on a wall using a
Wall-Mount Bracket (not supplied) out of the
box as packaged. Some larger size TV may
require detaching the Table-Top Stand; see
“Detaching the Table-Top Stand from the TV”
(page 12).
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
For product protection and safety reasons,
Sony strongly recommends that you use the
Wall-Mount Bracket designed for your TV
and the installation should be performed by
a Sony dealer or licensed contractor.
• Follow the instruction guide provided with
the Wall-Mount Bracket for your model.
Sufficient expertise is required in installing
this TV, especially to determine the
strength of the wall for withstanding the
TV’s weight.
• Be sure to use the screws supplied with the
Wall-mount bracket when attaching the
mounting hooks to the TV set.
The supplied screws are designed so that
they are 8 mm to 12 mm in length when
measured from the attaching surface of the
mounting hook.
The diameter and length of the screws differ
depending on the Wall-mount bracket
model. Use of screws other than those
supplied may result in internal damage to
the TV set or cause it to fall, etc.
8-12 mm
Installing the TV Against a
Wall or Enclosed Area
Make sure that your TV has adequate
ventilation. Allow enough space around the
TV as shown below. Avoid operating the TV at
temperatures below 41 °F (5 °C).
Installed with stand
7
/
inches
11
8
4 inches
(10 cm)
Leave at least this much space around the set.
(30 cm)
4 inches
(10 cm)
Installed on the wall
7
11
inches
/
8
(30 cm)
4 inches
(10 cm)
4 inches (10 cm)
Never install the TV set as follows:
Air circulation is blocked.
WallWall
Air circulation is blocked.
inches
4 inches
(10 cm)
Leave at
least this
much space
around the
set.
2
3
/
8
(6 cm)
Setting up your TV
Screw
(supplied with the
Wall-mount bracket)
Mounting Hook
Hook attachment on rear of TV
set
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small children.
~
• Read the supplied Safety Booklet for additional
safety information.
~
• Inadequate ventilation can lead to overheating of
the TV and may cause damage to your TV or
cause a fire.
13
To watch TV
To watch programs
1-2
Turn on the TV.
1
GUIDE
OPTIONS
HOME
0-9
ENT
2
1 For HX701 series models, check the
ENERGY SAVING SWITCH setting
is on (z).
2 Press POWER on the TV or on the
remote control to turn on the TV. (You
may use the 1 button located on the
front or back of the remote control.)
Select a TV channel.
2
To use the Guide
Press GUIDE to display the TV Guide On
Screen to view scheduled programs or to
select a program to watch. Press again to exit
the Guide. Use with 0-9 and ENT to select
digital channels. For example, to enter 2.1,
press , , and ENT.
To use the TV features
Press HOME to display TV Home Menu/
XMB
to access TV Settings and other
™
media and network related content.
Settings
Picture & Display
Adjust the picture and screen settings
Press for:
Picture Adjustments
Ambient Sensor
Screen
Pro Picture Setup
14
Press
OPTIONS
to display a list of convenient
functions and menu shortcuts. The Options menu
items vary based on current input and/or content.
Picture Adjustments
Sound Adjustments
Add to Favorites
Speakers
TV
To use i-Manual
1
2
Your BRAVIA TV comes with an on-screen
manual. You can browse your i-Manual anytime
you need to find the varieties of convenient
functions.
Press i-MANUAL.
1
Press F/f/G/g/ to navigate and
2
select items.
i-Manual
Welcome to i-Manual
BRAVIA TV Features
Watching TV
Using the Home Menu
Fun Features with Connected Equipment
Parts Description
Troubleshooting
Index
To watch TV
x Welcome to i-Manual
x BRAVIA TV Features
x Fun Features with Connected
Equipment
Introduces how to connect and enjoy optional
x Watching TV
Introduces convenient features such as TV
Guide, Favorites, etc.
x Using the Home Menu
You can find how to customize your TV
settings, etc.
~
• Images and illustrations may differ from what you are watching on this TV.
equipment.
x Parts Description
x Troubleshooting
You can find solutions for your problems.
x Index
RETURN
Back
15
Additional Information
Troubleshooting
The TV will indicate any problems with the STANDBY indicator flashing in red.
When the STANDBY indicator is flashing
The self-diagnosis function is activated.
1 Count how many times the STANDBY indicator flashes between each three second
break.
For example, the indicator may flash three times, go off for three seconds, then flash
again three times.
2 Press POWER on the TV to turn it off, disconnect the AC power cord, and inform your
dealer or Sony service center of how the indicator flashes (number of flashes).
When the STANDBY indicator is not flashing
1 Check the items in the tables below. (Also refer to “Troubleshooting” in the i-Manual.)
2 If the problem persists, contact Sony Customer Support (information provided on the
front cover).
ConditionExplanation/Solution
Picture
There is no picture (screen
is dark) and no sound.
Tiny black dots and/or
bright dots appear on the
screen.
General
The TV’s power cannot be
turned on. (for HX701
series models only)
The TV turns off
automatically (the TV
enters standby mode).
The remote does not
function.
The “Parental Lock”
password has been
forgotten.
• Check the antenna/cable connection.
• Connect the TV to the AC power, and press POWER on the TV.
• If the STANDBY indicator lights up in red, press POWER on the
remote control.
• The screen is composed of pixels. Tiny black dots and/or bright
dots (pixels) on the screen do not indicate a malfunction.
• Check to see the (z) mark on the ENERGY SAVING SWITCH
is pressed.
• Check if the Sleep Timer, Timer, or Idle TV Standby is
activated.
• The Auto Shut-off function may be set to On. If Auto
Shut-off is activated and TV receives no signal, the TV will automatically enter standby mode in 15 minutes. Check Auto
Shut-off is activated under Eco feature of this TV.
• Replace the batteries.
• Your TV may be in SYNC mode. Press SYNC MENU, select TV
Control and then select Home (Menu) or Options to control
the TV.
• Enter 4357 for the PIN code. (PIN code 4357 is always accepted.)
16
How to Care for Your BRAVIA
Safety is very important, please read and follow the safety documentation (Safety Booklet)
separately provided.
Unplug the TV and other connected equipment from the wall
outlet before you begin cleaning your TV.
• Wipe the LCD screen gently with a soft cloth.
• Stubborn stains may be removed with a cloth slightly moistened with a
solution of mild soap and warm water.
• If using a chemically pretreated cloth, please follow the instruction
provided on the package.
• Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
• Do not plug in the TV into the wall outlet until the moisture from cleaning has evaporated.
The TV should also be placed on a stable surface to prevent it from toppling over (see page 11).
If you have young children or pets at home, check regularly to insure the TV is securely fastened.
Additional Information
17
Specifications
Model name KDL-55HX70146HX70140HX70132EX30822EX308
System
Masswith stand (kg)/(lb.)40.2/88.528.4/62.622.4/49.411.0/24.36.6/14.6
Supplied accessories
Optional accessoriesConnecting cables / Support Belt Kit / Wall-Mount Bracket
*1 For LAN connections, use a Category 7 10BASE-T/100BASE-TX cable (not supplied).
*2 Download Acquisition Mode (DAM) is used for software updates and/or collecting data for TV Guide On Screen.
• Optional accessories availability depends on its stock.
• Design and specifications are subject to change without notice.
box (2) (inches)
without stand (mm)
wall-mount hole pattern (mm)
wall-mount screw size (mm)
without stand (kg)/(lb.)34.4/75.824.3/53.519.2/42.39.5/21.06.0/13.3
ATSC (8VSB terrestrial): ATSC compliant 8VSB
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
HDMI: Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
AUDIO (HDMI IN 4)
PCM/Dolby Digital optical signal
10BASE-T/100BASE-TX connector (Connection speed may differ depending on the network environment.
10BASE-T/100BASE-TX communication rate and communication quality are not guaranteed for this TV.)*
253 W210 W172 W113 W61 W
13 W12 W11 W11 W9 W
(You may hear a clicking noise during the download but this is normal.)
54.6 inches
(55 class)
46 inches40 inches
31.5 inches
(32 class)
1,366 dots (horizontal) × 768 lines (vertical)
(inches)
(inches)
45 × 120
13
1
/16 × 4 3/4
1,363 × 862 × 400
53 3/4 × 34 × 15 3/
1,363 × 825 × 105
53 3/4 × 32 1/2 × 4 1/4
1,154 × 741 × 370
4
45 1/2 × 29 1/4 × 14 5/8
1,154 × 704 × 102
45 1/2 × 27 3/4 × 4 1/8
34 × 105
3
/8 × 4 1/4
1
1,023 × 665 × 310
40 3/8 × 26 1/4 × 12 1/
1,023 × 628 × 100
40 3/8 × 24 3/4 × 4
45 × 130
13
/16 × 5 1/8
1
800 × 532 × 220
4
31 1/2 × 21 × 8 3/
800 × 497 × 97
31 1/2 × 19 5/8 × 3 7/
400 × 300300 × 300200 × 200100 × 100
M6
(length: refer to diagram on page 13.)
See “Checking the accessories” (page 4).
21.6 inches
(22 class)
40 × 100
1
551 × 402 × 215
4
21 3/4 × 15 7/8 × 8 1/
551 × 367 × 82
8
21 3/4 × 14 1/2 × 3 1/
5
/8 × 4
M4
1
2
4
18
Declaration of Conformity
Trade Name: SONY
Model: KDL-55HX701/KDL-46HX701/KDL-40HX701/
KDL-32EX308/KDL-22EX308
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
For customers in Canada
This Class B digital apparatus complies with Canadian
ICES-003.
FCC Related Information
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one
or more of the following measures:
❑Reorient or relocate the receiving antenna.
❑Increase the separation between the equipment and
receiver.
❑Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
❑Consult the dealer or an experienced radio/TV
technician for help.
Pursuant to FCC regulations, you are cautioned that any
changes or modifications not expressly approved in this
manual could void your authority to operate this
equipment.
This equipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum
distance 20 cm between the radiator and your body
(excluding extremities: hands, wrists and feet).
This device and its antenna(s) must not be colocated or
operating with any other antenna or transmitter except
Grant condition.
Note
This television includes a QAM demodulator which should
allow you to receive unscrambled digital cable television
programming via subscription service to a cable service
provider. Availability of digital cable television
programming in your area depends on the type of
programming and signal provided by your cable service
provider.
Compatible Wall-Mount Bracket Information
Use the following Sony Wall-Mount Bracket with
your TV model.
Sony TV Model No.
KDL-55HX701
KDL-46HX701
KDL-40HX701
KDL-22EX308
KDL-32EX308
Sony Wall-Mount
Bracket Model No.
Use with other Wall-Mount Brackets may cause instability
and could result in property damages or injury.
SU-WL500SU-WL100
To Customers
Sufficient expertise is required for TV installations. Be
sure to subcontract the installation to a Sony dealer or
licensed contractor and pay adequate attention to safety
during the installation.
For Customers in the United States
Lamp in this product contains mercury.
Disposal of these materials may be regulated
due to environmental considerations. For
disposal or recycling information, please
contact your local authorities or the Electronic
Industries Alliance (www.eiae.org).
Additional Information
Safety and Regulatory
To prevent radio interference to the licensed service, this
device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its
transmit antenna) that is installed outdoors is subject to
licensing.
Only use Wireless LAN indoors when using it with IEEE
802.11a/n (5 GHz).
High power radars are allocated as primary users (meaning
they have priority) of 5250-5350 MHz and 56505850 MHz and these radars could cause interference and/or
damage to this device.
This device uses 5 GHz band for wireless LAN
communication and the maximum gain of the antenna in
this device is 6 dBi.
19
Online
Registration:
Software
Updates:
For Your Convenience
Be sure to register your TV.
United States
Canada
Your TV is capable of receiving software updates. For the
latest information about software updates for your TV, visit:
United States
Canada
NOTE: If your TV is connected to the Internet, you can check
for software updates by selecting Settings, Product Support and then Automatic Software Update.