Sony 1T362A Datasheet

—1—

E93574C8X

Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.

Absolute Maximum Ratings (Ta=25 °C)

• Reverse voltage VR 30 V

• Peak reverse voltage VRM 35 V

(RL≥10 kΩ)

• Operating temperature Topr 85 °C

• Storage temperature Tstg –55 to +150 °C

Description

The 1T362A is a variable capacitance diode
designed for electronic tuning of TV tuners and the
super-miniature package allows the tuner
miniaturization.

Features

• Super miniature package

• Low series resistance 0.65 Ω Max. (f=470 MHz)

• Large capacitance ratio 6.5 Typ. (C2/C25)

• Small leakage current 10 nA Max. (VR=28 V)

• Capacitance deviation within 2 %

Applications

Electronic tuning of TV and CATV

Structure

Silicon epitaxial planar type diode

Silicon Variable Capacitance Diode

M-235

1T362A

Electrical Characteristics (Ta=25 °C)

Item

Reverse current
Diode capacitance
Capacitance ratio

Series resistance
Capacitance deviation in a
matching group

Symbol

IR

C2

C25

C2/C25

rs

∆C

Conditions
VR=28 V
VR=2 V, f=1 MHz
VR=25 V, f=1 MHz
f=1 MHz
CD=14 pF, f=470 MHz

VR=2 to 25 V, f=1 MHz

Min. Typ. Max. Unit

10 nA

14.01 15.00 16.33 pF

2.10 2.27 2.39 pF

6.5

0.57 0.65 Ω
2%

∆C:The capacitance deviation of continuous 20 pcs of 1T362A is ranged within 2% in any place of the

taping package.

—2—

1T362A

Product Name and Package Specification for the 1T362A.

According to the classification number for the combination of capacitance deviations (hereafter ∆C), assembly
method and automatic mounting equipment section, the following product names are assigned.

Note1) In taping packaging of products groups according to the ∆C classification, products must be divided

according to the group. If taping is performed without grouping into categories, products from two
different groups may be mounted on the same tuner, so that ∆C cannot be assured during tuning,
making tuning defective.

A: Panasert method; Sections are divided by four blank spaces on the carrier tape.

B: Sanyo method; Black tape is affixed to one blank space on the carrier tape to mark sections.

Note 2) ∆C kit number

When taping each group, taping is performed in kit number multiples.

01; Incomplete kit (∆C not guaranteed)
04; 4 kits
20; 20 kits
Recommended kit number; 4 and 20

Other) Minimum number of kits per group is 240 (60 or more at the beginning of the carrier tape). Up

to nine sections on one reel.

Note 3) “MAP” is the method where the neighboring chips are assembled continuously in order to enhance the

concentration of the capacitance deviation in a matching group.

1T362ABase model 04 T8 A

A

1T362ADerived model 20M A T8

Note 1 : Package specification as ordered by customer
∗ Taping direction ∗ T8 only to consolidate specifications
Special selection symbol
Note 2 : ∆C kit number
Note 3 : Assembly method M=MAP