This is the Xperia™ L1 User Guide for the Android™ 7.0 software version. If you're not
sure which software version your device is running, you can check it in the Settings
menu.
System and application updates can present the features in your device in another way than
described in this User Guide. The Android™ version might not be affected in an update. For
more information about software updates, see
To Check the Current Software Version of Your Device
1
From your Home screen, tap
2
Find and tap Settings > About phone > Android™ version.
To Find the Model Number and Name of Your Device
1
From your Home screen, tap
2
Find and tap
The device model number and name are displayed.
.
.
.
Limitations to Services and Features
Some of the services and features described in this User Guide may not be supported in
all countries or regions, or by all networks or service providers. The GSM International
Emergency Number can always be used in all countries, regions, networks and by all
service providers, provided that the device is connected to the cellphone network.
Please contact your network operator or service provider to determine the availability of
any specific service or feature and whether additional access or usage fees apply.
The use of certain features and applications described in this guide may require access
to the internet. You may incur data connection charges when you connect to the internet
with your device. Contact your wireless service provider for more information.
Your device only supports nano SIM cards. The nano SIM card and the memory card
have separate slots in the same holder. Make sure you don’t confuse the two.
To prevent data loss, be sure to turn off your device or unmount the memory card before you
drag out the holder to remove the nano SIM card or memory card from the device.
To Insert the Nano SIM Card and the Memory Card
Do not cut your SIM card, for example, using a blade or scissors, as this may damage your
device.
1
Open the nano SIM/memory card slot cover.
2
Using your fingernail, drag out the nano SIM card tray.
3
Firmly place the SIM card in the correct orientation as shown in the illustration.
4
Insert the memory card in the correct orientation into its slot as shown in the
illustration.
5
Gently push the tray back into the slot until it fits into place.
With the screen facing down, open the nano SIM/memory card slot cover.
3
Drag out the nano SIM card tray using your fingernail.
4
Remove the nano SIM card, then gently push the tray back into the slot until it fits
into place.
5
Close the nano SIM/memory card slot cover.
To remove a memory card
1
Turn off your device.
2
With the device facing down, open the nano SIM/memory card slot cover.
3
Gently push in the memory card to release it from its slot. Remove the memory
card and close the nano SIM/memory card slot cover.
Screen Protection
Before using your device, remove the protection
Screen covers and protectors may help you to protect your device against damage. We
recommend that you use only those screen covers intended for your Xperia™ device.
The use of third-party screen protection accessories may prevent your device from
working correctly by covering sensors, lenses, speakers, or microphones, and can
invalidate the warranty.
film by pulling up on the protruding tab.
Starting Your Device for the First Time
It is recommended that you charge the battery for at least 30 minutes before starting up
your device for the first time. You can still use your device while it is charging, see
Charging Your Device
The first time you start your device, a setup guide helps you to configure basic settings,
personalize your device, and sign in to your accounts, for example a Google™ account.
To Turn On the Device
1
Press and hold down the power key
2
Enter your SIM card PIN when requested, and then tap
3
Wait a while for the device to start.
Your SIM card PIN is initially supplied by your service provider, but you can change it later
from the Settings menu. To correct a mistake made while entering your SIM card PIN, tap .
on page 32.
until the device vibrates.
.
To Turn off the Device
1
Press and hold down the power key until the options menu opens.
Your Xperia™ device from Sony runs on the Android™ platform developed by Google™.
A range of Google™ applications and services is available on your device when you
purchase it, for example, Gmail™, Google Maps™, YouTube™, and the Play Store™
application which gives you access to the Google Play™ online store for downloading
Android™ applications. To get the most out of these services, you need a Google™
account. For example, a Google™ account enables you to do all of the following:
•
Download and install applications from Google Play™.
•
Synchronize your email, contacts, and calendar using Gmail™.
•
Chat with friends using the Duo™ application.
•
Synchronize your browsing history and bookmarks using the Google Chrome™ web
browser.
•
Identify yourself as the authorized user after a software repair using Xperia™ Companion.
•
Remotely find, lock, or clear a lost or stolen device using the my Xperia™ or Android™
Device Manager services.
For more information about Android™ and Google™, go to
It is crucial that you remember your Google™ account username and password. In some
situations, you may need to identify yourself for security reasons using your Google™ account.
If you fail to give your Google™ username and password in such situations, your device is
locked. Also, if you have more than one Google™ account, be sure to enter the details for the
relevant account.
To Set Up a Google™ Account on your Device
1
From your
2
Find and tap Settings > Accounts & sync > Add account > Google.
3
Follow the registration wizard to create a Google™ account, or sign in if you
Home screen
, tap .
already have an account.
http://support.google.com
.
You can also sign in to or create a Google™ account from the setup guide the
start your device. Alternatively, you can go online and create an account at
www.google.com/accounts
.
first time you
To Remove a Google™ Account
1
From your
2
Tap Settings > Accounts & sync > Google.
3
Select the Google™ account you want to remove.
4
Tap
5
Tap
If you remove your Google™ account, any security features that are linked to your Google™
account will no longer be available.
Your device includes several security options, strongly recommended in case of loss or
theft.
These options are as follows:
•
Set a secure screen lock on your device using a PIN, password, or pattern to prevent
anyone from accessing or resetting your device.
•
Add a Google™ account to prevent others from using your device if it gets stolen or
wiped.
•
Activate either the “Protection by my Xperia” or the Android™ Device Manager web
service. Using one of these services, you can remotely locate, lock, or clear a lost device.
Verifying the ownership of your device
Certain protection features require you to either unlock your screen with your PIN,
password, or pattern, or enter your Google™ account information. Below are examples
of protection features and their required credentials:
Factory Data
Reset
protection
Protection by
my Xperia
You must unlock your screen before you are allowed to perform a
Factory Data Reset.
If you remotely reset your device using this service, you must enter the
username and password for a Google™ account associated with the
service. The device must be connected to the internet before the setup
process can be completed. Otherwise, you will not be able to use your
device after the reset.
Android™
Device Manager
If you remotely reset your device using this service, you must enter the
username and password for a Google™ account. The device must be
connected to the internet before the setup process can be completed.
Otherwise, you will not be able to use your device after the reset.
Software repair
You must enter your Google™ account username and password when
you start the device after the repair is complete.
For Android™ Device Manager, it is necessary to enter information from a Google™ account.
This can be any Google™ account which you have set up on the device as an owner. If you
cannot provide the relevant account information during a setup process, you won't be able to
use the device at all.
Screen Lock
There are several screen lock options available. The security level of each lock type is
listed below in order of weakest to strongest:
•
Swipe
– no protection, but you have quick access to the Homescreen.
•
Pattern
– draw a simple pattern with your finger to unlock your device.
•
PIN
– enter a numeric PIN of at least four digits to unlock your device.
•
Password
– enter an alpha-numeric password to unlock your device.
It is very important that you remember your screen unlock pattern, PIN, or password. If
you forget this information, it may not be possible to restore important data, such as
contacts and messages. If you have set up a Microsoft® Exchange ActiveSync® (EAS)
account on your Xperia™ device, the EAS security settings may limit the lockscreen type
to only a PIN or password. This occurs when your network administrator specifies a
lockscreen type for all EAS accounts for enterprise security reasons. Contact the
network administrator of your company or organization to check what network security
policies are implemented for cellular devices.
For more settings for each screen lock type, tap beside Screen lock.
To Change Your Screen Lock Type
1
From your Home screen, tap .
2
Find and tap Settings > Lock screen & security > Screen lock.
3
Choose an option and follow the instructions on your device.
To Create a Screen Lock Pattern
1
From your Home screen, tap
2
Find and tap Settings > Lock screen & security > Screen lock > Pattern.
3
Choose an option and follow the instructions on your device.
If you enter an incorrect lock pattern five times in a row, you must wait 30 seconds before
trying again.
.
To Change the Screen Lock Pattern
1
From your Home screen, tap .
2
Find and tap Settings > Lock screen & security > Screen lock.
3
Draw your screen unlock pattern.
4
Tap
Pattern
, choose an option, and follow the instructions on your device.
To Create a Screen Lock PIN
1
From your
2
Find and tap Settings > Lock screen & security > Screen lock > PIN.
3
Choose an option. Enter a numeric PIN, and then tap
4
Re-enter and confirm your PIN, then tap OK.
Home screen
, tap .
CONTINUE
.
To Create a Screen Lock Password
1
From your Home screen, tap
2
Find and tap
3
Choose an option and follow the instructions on your device.
Settings
>
Lock screen & security
.
>
Screen lock
>
Password
To Activate the Swipe Unlock Function
1
From your Home screen, tap .
2
Find and tap
3
Draw your screen unlock pattern, or enter your PIN or password depending on
Settings
>
Lock screen & security
>
Screen lock
.
which of these screen lock types is enabled.
4
Tap Swipe, then tap YES, REMOVE.
Resetting a Forgotten Screen Lock
If you forgot your screen lock PIN, password, or pattern, you may be able to reset it
using the Protection by my Xperia service. No content on your device is lost after you
have performed a screen lock reset using this service.
To Reset the Screen Lock Using Protection by My Xperia
1
Make sure you know your Google™ account username and password and that
you have enabled the Protection by my Xperia service on your device.
2
Go to
myxperia.sonymobile.com
3
Sign in using the same Google™ account you have set up on your device.
4
Click the picture of your device under Your devices.
5
Select Lock to replace the current screen lock with a new PIN code.
6
Follow the on-screen instructions provided by Protection by my Xperia.
using any internet-connected device.
.
Depending on your security settings, your device may lock after a screen lock reset. You then
need to enter your Google™ account username and password in order to use the device.
The Smart Lock feature lets you set your device to unlock automatically in certain
situations, for example, when connected to a Bluetooth® device or when carrying it with
you. When Smart Lock is enabled you still need to unlock your device manually after
restarting, and after leaving the device inactive for 4 hours.
Choose from the following Smart Lock settings:
•
On-body detection: Keep your device unlocked when carrying it with you.
•
Trusted places: Keep your device unlocked when in a familiar, secure location, such as
your home.
•
Trusted devices: Keep your device unlocked when a trusted Bluetooth® or NFC device
is connected.
•
Trusted face: Unlock your device by looking at it.
•
Trusted voice: Use voice recognition to unlock your device from the lockscreen or while
it’s charging, and activate Google™.
The Smart Lock feature is developed by Google™, so its functionality may be changed or
updated over time. Furthermore, the feature may not be available in every market, country, or
region.
To Enable Smart Lock
1
Set a pattern, PIN, or password as a screen lock if you have not already done so.
2
From your Home screen, tap .
3
Find and tap
4
Tap the Smart Lock (Google) slider to enable the function.
5
Tap the back arrow next to
6
Find and tap Smart Lock.
7
Enter your pattern, PIN, or password. You need to enter these credentials
Settings
whenever you want to change your Smart Lock settings.
8
Select a Smart Lock type.
>
Lock screen & security
Trust agents
.
>
Trust agents
.
To set up or remove trusted face
1
From your
2
Find and tap Settings > Lock screen & security > Smart Lock > Trusted face.
3
Tap
4
To remove a trusted face, tap Remove trusted face > REMOVE.
For enhanced accuracy, tap
SET UP
Home screen
>
NEXT
, tap .
. Follow the instructions on your device, then tap
Trusted face > Improve face-matching.
FINISHED
To set up trusted voice
1
From your Home screen, tap .
2
Find and tap
3
Follow the instructions on your device.
Settings
>
Lock screen & security
>
Smart Lock
>
Trusted voice
Keeping Your Device Unlocked while You’re Carrying It
Using the On-body detection feature, you can keep your device unlocked while you're
carrying it in your hand or in a pocket or bag. The accelerometer in your device keeps
your device unlocked while it senses that it's being carried. The device locks when the
accelerometer detects that the device has been put down.
When you use the On-body detection feature, you need to be aware of the following
behaviors:
•
Any time you put your device down and it senses that it's no longer being carried, it
locks automatically.
•
The device can take up to one minute to lock.
•
After you get into a car, bus, train, or other land vehicle, your device can take between 5
and 10 minutes to lock.
•
Note that when you get on an airplane or a boat (or another non-land-based vehicle),
your device may not lock automatically, so be sure to lock it manually if needed.
When you pick up your device again or get out of the vehicle, just unlock it once and
your device then stays unlocked for as long as you have it on you.
The On-body detection feature can't distinguish whose body is connected. If you give your
device to someone else while it's unlocked using On-body detection, your device may stay
unlocked for the other user. Keep in mind that On-body detection as a security feature is less
secure than a pattern, PIN, or password.
To Enable or Disable On-Body Detection
1
From your Home screen, tap .
2
Find and tap Settings > Lock screen & security > Smart Lock > On-body
detection.
3
Tap the slider to enable the function, then tap CONTINUE. To disable the function,
tap the slider beside On.
Connecting to trusted devices
If you have a device that you connect to regularly using Bluetooth® or NFC, for example,
a home entertainment system or a fitness tracker, you can add it as a trusted device and
bypass the added security of the lockscreen to save time. This feature is suitable if you’re
normally in a secure place when you use this device. In some cases, you may still need
to manually unlock your device before a trusted device can be connected.
It is not recommended to add devices that are constantly connected to your device as trusted
devices, for example, Bluetooth® keyboards or mice.
As soon as a trusted device is switched off or moves out of range, your screen locks and you
need your PIN, pattern, or password to unlock it.
To Add or Remove a Trusted Bluetooth® Device
1
Make sure your device is paired and connected to the Bluetooth® device that you
want to add as a trusted device.
2
From your
3
Find and tap Settings > Lock screen & security > Smart Lock.
4
In the Smart Lock menu tap
Home screen
, tap .
Trusted devices
>
ADD TRUSTED DEVICE
>
Bluetooth.
5
Tap a device name to select it from the list of connected and paired devices, then
tap YES, ADD.
6
To remove a paired device, select it from the list and tap
REMOVE TRUSTED
DEVICE.
To Add or Remove a Trusted NFC Device
1
Make sure your device is paired and connected to the Bluetooth® device that you
want to add as a trusted device.
2
Find and tap Settings > Lock screen & security > Smart Lock.
3
Tap Trusted devices > ADD TRUSTED DEVICE > NFC.
4
Follow the on-screen instructions.
5
To remove a paired device, select it from the list and tap REMOVE TRUSTED
DEVICE
Making Sure You're Secure when Using Trusted Devices
Different Bluetooth® devices support different Bluetooth® standards and security
capabilities. There's a chance someone could keep your Xperia™ device unlocked by
imitating your Bluetooth® connection, even if your trusted device is no longer nearby.
Your device is not always able to determine whether your connection is secure from
someone trying to imitate it.
When your device can't determine whether you're using a secure connection, you'll get a
notification on your Xperia™ device and may need to manually unlock it before the
trusted device can keep it unlocked.
Bluetooth® connectivity range can vary depending on factors like the model of your device,
the connected Bluetooth® device, and your environment. Depending on these factors,
Bluetooth® connections can work over distances up to 100 meters.
Connecting to Trusted Places
When the Trusted places feature is set up, the lockscreen security on your Xperia™
device gets disabled when you are in a designated trusted location. For this feature to
work, you must have an internet connection (preferably over Wi-Fi) and allow your device
to use your current location.
To set up trusted places, first make sure high-accuracy location mode or battery-saving
location mode is enabled on your device before you add home or custom locations.
The exact dimensions of a trusted location are an estimate and may extend beyond the
physical walls of your home or other areas you have added as trusted locations. This feature
can keep your device unlocked within a radius of up to 80 meters. Also be aware that location
signals can be replicated or manipulated. Someone with access to specialized equipment
could unlock your device.
To Add Your Home Location
1
From your
2
Find and tap Settings > Lock screen & security > Smart Lock > Trusted places >
Home
3
To enter the desired location type the address in the search bar. Your device
Home screen
.
searches for the entered location.
, tap .
To Edit Your Home Location
1
From your
2
Find and tap Settings > Lock screen & security > Smart Lock > Trusted places.
3
Select your home location.
4
Tap Edit.
5
In the search bar, enter the location that you want to use as your home location.
If other residences share your street address, you can add the actual location of your home
within the building complex as a custom place.
Home screen
, tap .
To Remove Your Home Location
1
From your
2
Find and tap Settings > Lock screen & security > Smart Lock > Trusted places >
Home
3
Tap Edit >
Home screen
.
.
, tap .
Using Custom Locations
You can add any location as a trusted, custom place where your device can remain
unlocked.
To Add a Custom Place
1
From your Home screen, tap
2
Find and tap Settings > Lock screen & security > Smart Lock > Trusted places.
3
Tap Add trusted place.
4
To use your current location as a custom place, tap Select this location.
5
Alternately, to enter another location, tap and type the address. Your device
searches for the entered location. Tap the suggested address to use it.
6
To fine-tune the location, tap the back arrow next to the address, drag the location
pin to the desired location, and then tap Select this location.
Find and tap Settings > Lock screen & security > Smart Lock > Trusted places.
3
Select the place that you want to edit.
4
Tap Edit Address.
5
To enter another location, tap , and then type the address. Your device searches
for the entered location. To use the suggested address, tap the address.
6
To fine-tune the location, tap the back arrow next to the address, drag the location
pin to the desired location, and then tap Select this location.
To Remove a Custom Place
1
From your Home screen, tap
2
Find and tap Settings > Lock screen & security > Smart Lock > Trusted places.
3
Select the place you want to remove.
4
Tap Delete.
.
SIM Card Protection
You can lock and unlock each SIM card that you use in your device with a PIN (Personal
Identification Number). When a SIM card is locked, the subscription linked to the card is
protected against misuse, meaning you have to enter a PIN every time you start your
device.
If you enter the PIN incorrectly too many times, your SIM card will get blocked. You then
need to enter your PUK (Personal Unblocking Key) and a new PIN. Your PIN and PUK
are supplied by your service provider.
To Set Up a SIM Card Lock
1
From the Homescreen, tap
2
Find and tap
3
Tap the Lock SIM card slider to enable or disable the SIM card lock.
4
Enter the SIM card PIN and tap OK. The SIM card lock is now active and you will
be prompted to enter the PIN every time you restart the device.
To Change the SIM Card PIN
1
From the Home screen, tap .
2
Find and tap
3
Tap Change SIM PIN.
4
Enter the old SIM card PIN and tap OK.
5
Enter the new SIM card PIN and tap OK.
6
Retype the new SIM card PIN and tap OK.
To Unlock a Blocked SIM Card Using the PUK Code
1
Enter the PUK code and tap .
2
Enter a new PIN code and tap .
3
Re-enter the new PIN code and tap
If you enter an incorrect PUK code too many times, you need to contact your network operator
to get a new SIM card.
Settings
Settings
>
>
.
Lock screen & security
Lock screen & security
.
>
Set up SIM card lock
>
Set up SIM card lock
.
.
Finding the Identification Number of Your Device
Your device has a unique identification number. This number is referred to as the IMEI
(International Mobile Equipment Identity). You should keep a copy of this number. You
may require it, for example, when you access the Xperia™ Care support service to
register your device. Also, if your device is stolen, some network providers can use this
number to stop the device from accessing the network in your country or region.
Drag the strip outward using your fingernail. The IMEI number is displayed on the
strip.
You can also view the IMEI number by opening the phone dialer and entering *#06#.
To View Your IMEI Number via the Device Settings
1
From your
2
Find and tap Settings > About phone > Status > IMEI information.
Home screen
, tap .
Finding a Lost Device
If you have a Google™ account, the “Protection by my Xperia” web service can help you
locate and secure your device if you ever lose it. If you have activated this service on your
device, you can:
•
Locate your device on a map.
•
Sound an alert even if the device is in Do not disturb mode.
•
Remotely lock the device and make the device display your contact details to anyone
who finds it.
•
Remotely clear the internal and external memory of the device as a last resort.
If you’ve cleared the internal memory of the device using the “Protection by my Xperia” web
service, you must sign in to a Google™ account that was previously synced on this device the
next time you turn on the device.
The “Protection by my Xperia” service may not be available in all countries or regions.
Make sure you have an active data connection, and enable location services on
your device.
2
From your Home screen, tap .
3
Find and tap Settings > Lock screen & security > Protection by my Xperia >
ACTIVATE.
4
Mark the checkbox to agree to the terms and conditions of the service, then tap
ACCEPT.
5
If prompted, sign in to your Google™ account, or create a new account if you
don’t already have one.
6
To verify that Protection by my Xperia can locate your device, go to
myxperia.sonymobile.com
If you are sharing a device with multiple users, note that the Protection by my Xperia service is
only available to the user who is logged in as the owner.
and sign in to your Google™ account.
Finding a Lost Device Using Android™ Device Manager
Google™ offers a location and security web service called Android™ Device Manager.
You can use it in parallel with, or as an alternative to, the Protection by my Xperia service.
If you lose your device, you can use Android™ Device Manager to:
•
Find and show where your device is located.
•
Ring or lock your device, erase everything on it, or add a phone number to the
lockscreen.
For additional information about Android™ Device Manager, go to
www.support.google.com
.
Android™ Device Manager does not work if your device is turned off or if it does not have a
connection to the internet. The Android™ Device Manager service may not be available in all
countries or regions.
To Activate Android™ Device Manager
1
If you are sharing a device with multiple users, make sure you are logged in as the
owner.
2
Make sure you have an active data connection and location services are enabled.
3
From your Home screen, tap
4
Find and tap
5
Tap the sliders beside Remotely locate this device and Allow remote lock and
to enable both functions.
erase
6
If prompted, agree to the terms and conditions by tapping Activate this device
administrator
7
To verify that Android™ Device Manager can locate your device after you activate
Settings
.
the service, go to
>
Google
www.android.com/devicemanager
.
>
Security
.
and sign in using your
Google™ account.
You can also activate Android™ Device Manager from
administrators.
Scroll left or right, for example, between Homescreen panes.
•
Swipe left or right to reveal more options.
Flicking
•
Scroll quickly, for example, in a list or on a web page. You can stop the scrolling
movement by tapping the screen.
Locking and Unlocking the Screen
When your device is on and left idle for a set period of time, the screen darkens to save
battery power and locks automatically. This lock prevents unwanted actions on the
touchscreen when you are not using it. When you buy your device, a basic screen swipe
lock is already set. This means you have to swipe left or upward on the screen to unlock
it. You can change the security settings later and add other kinds of locks. See
When the screen is active, briefly press the power key .
•
Alternately, double-tap any empty area on the Homescreen. To enable this function,
touch and hold any area on your Homescreen until the device vibrates, then tap and
tap the slider beside Double-tap to sleep.
Homescreen
The Homescreen is the starting point for using your device. It’s similar to the desktop on
a computer screen. Your Homescreen can have up to twenty panes, which extend
beyond the regular screen display width. The number of Homescreen panes is
represented by a series of dots on the lower part of the Homescreen. The highlighted dot
shows the pane that is currently displayed.
1Welcome to Xperia™ widget – Tap to open the widget and select a task such as copying content from
your old device or setting up Xperia™ services
2Dots – Represents the number of Homescreen panes
To go to the Home screen
•
Press .
To browse the Home screen
Homescreen Panes
You can add new panes to your Homescreen (up to a maximum of twenty panes) and
delete panes. You can also set the pane that you want to use as the main Homescreen
pane.
Touch and hold any area on your Homescreen until the device vibrates.
2
Flick left or right to browse to the pane you want to set as your main Homescreen
pane, then tap
When Google Search & Now is enabled, the left-most pane is reserved for this service and the
main Homescreen pane cannot be changed. For more information, see
on page 113.
in the upper-left corner of the screen.
Google Search & Now
To Add a Pane to Your Homescreen
1
Touch and hold any area on your Homescreen until the device vibrates.
2
To browse the panes, flick all the way to the right or left, then tap
When Google Search & Now is enabled, the left-most pane is reserved for this service and
additional panes cannot be added to the left. For more information, see
on page 113.
.
Google Search & Now
To Delete a Pane from your Homescreen
1
Touch and hold any area on your Homescreen until the device vibrates.
2
Flick left or right to browse to the pane you want to delete, then tap
in the top-
right corner of the pane.
Homescreen Settings
To disable or uninstall an application from the homescreen
Disabling a pre-installed app deletes all data, but the app can be enabled again from
> Apps. Only downloaded apps can be fully uninstalled.
1
Touch and hold any area on your Homescreen until the device vibrates.
2
Flick left or right to browse the panes. All applications that can be disabled or
uninstalled are indicated by
3
Tap the relevant application, then tap DISABLE if the app came pre-installed on
.
your device or OK if the app was downloaded and you would like to uninstall it.
To Adjust the Size of Icons on Your Homescreen
1
Touch and hold any area on your Homescreen until the device vibrates, then tap
.
2
Tap Icon size, then select an option.
Application screen
The Application screen, which you open from the Homescreen, contains the applications
that come pre-installed on your device as well as applications that you download.
To view all applications on the Application screen
1
From your Home screen, tap
2
Flick left or right on the Application screen.
.
To Enable or Disable the Recommended Apps Listings
The first time you access the application screen, you get the option to enable or disable
recommended apps listings. You can also enable or disable this feature later by following
the steps below:
1
Touch and hold any area on your Homescreen until the device vibrates, then tap
.
2
Tap the App recommendations slider.
To Open an Application from the Application Screen
•
When the Application screen is open, flick left or right to find the application, and
then tap the application.
To Search for an Application from the Application Screen
1
When the Application screen is open, tap
Search applications
or simply swipe
down on the Application screen or Homescreen.
2
Enter the name of the application you want to search for.
To Arrange Applications on the Application Screen
1
When the Application screen is open, tap
2
Tap Sort apps, then select an option.
.
To Add an Application Shortcut to the Homescreen
1
On the Application screen, touch and hold an application icon until the device
vibrates, and then drag the icon to the top of the screen. The Homescreen opens.
2
Drag the icon to the desired location on the Homescreen, then release it.
To Move an Application on the Application Screen
1
When the Application screen is open, tap .
2
Make sure Own order is selected under Sort apps.
3
Touch and hold the application until the device vibrates, and then drag it to the
new location.
To disable or uninstall an application from the application screen
Disabling a pre-installed app deletes all data, but the app can be enabled again from
> Apps. Only downloaded apps can be fully uninstalled.
1
Touch and hold any area on the Application screen until the device vibrates. All
applications that can be disabled or uninstalled are then indicated by .
2
Tap the relevant application, then tap DISABLE if the app came pre-installed on
your device or OK if the app was downloaded and you would like to uninstall it.
You can navigate between applications using the navigation keys and the recently used
applications window, which lets you switch easily between all recently used applications.
The navigation keys are the Back key, the Home key, and the Recent apps key. You can
also pop open two applications on the screen at once using the split screen mode, if the
application supports multi-window function. Some applications get closed when you
press the Home key
background. If an application is paused or running in the background, you can continue
where you left off the next time you open the application.
to exit while others are paused or continue to run in the
1Clear all – Close all the recently used applications
2Recently used applications window – Open a recently used application
3Recent apps key – Open the recently used applications window and the favorites bar
4Home key – Exit an application and go back to the Homescreen
5Back key – Go back to the previous screen within an application or close the application
To open the recently used applications window
•
Press .
To Quickly Switch Between Recently Used Applications
•
Quickly press twice.
To Close All the Recently Used Applications
•
Tap
and then tap CLEAR ALL.
To Open a Menu in an Application
•
While using the application, tap
Menus are not available in all applications.
.
Split Screen Mode
Split screen mode enables you to view two applications at once, for example, if you want
to view your email inbox and a web browser at the same time.
4 Split screen key – Select a recently used application
5 Home key – Go back to the Homescreen
6 Back key – Go back to the previous screen within an application or close the application
Not all applications support split screen mode.
To Use Split-Screen Mode
1
Make sure the two applications that you want to use in split screen mode are
open and running in the background.
2
Tap
, then drag and drop the desired application to the top part of the screen.
3
In the lower part of the screen, tap the second desired application.
4
In portrait orientation, drag the black bar in the center up or down to resize the
windows.
5
To exit split-screen mode, tap and hold
.
Widgets
Widgets are small applications that you can use directly on your Homescreen. They also
function as shortcuts. For example, the Weather widget allows you to see basic weather
information directly on your Homescreen. When you tap the widget, the full Weather
application opens. You can download additional widgets from Google Play™.
To Add a Widget to the Homescreen
1
Touch and hold any empty area on your Home screen until the device vibrates,
then tap Widgets.
2
Find and tap the widget you want to add.
To Resize a Widget
1
Touch and hold a widget until the device vibrates, and then release it. If the widget
can be resized, for example, the Calendar widget, then a highlighted frame and
resizing dots appear.
2
Drag the dots inward or outward to shrink or expand the widget.
3
To confirm the new size of the widget, tap anywhere on the Home screen.
To Move a Widget
•
Touch and hold the widget until the device vibrates, and then drag it to the new
location.
To Remove a Widget
•
Touch and hold the widget until the device vibrates, and then drag it to Remove
from home screen.
Use shortcuts and folders to manage your applications and keep your Home screen tidy.
1Access an application using a shortcut
2Access a folder containing applications
To Add an Application Shortcut to Your Homescreen
1
Touch and hold an empty area on your Home screen.
2
In the customization menu, tap
3
Scroll through the list and select an application. The selected application gets
added to the
Home screen
Widgets
.
>
Shortcuts
.
To Move an Item on the Homescreen
•
Touch and hold the item until the device vibrates, and then drag the item to the
new location.
To Remove an Item from the Homescreen
•
Touch and hold the item until the device vibrates, and then drag the item to
Remove from home screen
To Create a Folder on the Homescreen
•
Touch and hold an application icon or a shortcut until the device vibrates, and then
drag and drop it on top of another application icon or shortcut.
To Add Items to a Folder on the Homescreen
•
Touch and hold an item until the device vibrates, and then drag the item to the
folder.
To rename a folder on the Homescreen
1
Tap the folder to open it.
2
Tap the folder's title bar to show the Folder name field.
3
Enter the new folder name and tap DONE.
at the top of the screen.
Background and Themes
Your device comes with a default background, but you can adapt the Home screen and
Lock screen to your own style using wallpapers and themes featuring different colors and
patterns.
A wallpaper may be used without changing any of the other elements of your
Homescreen and Lockscreen. Live wallpapers add visual effects to your interactions with
the touch screen, letting the display change dynamically.
Themes can include a wallpaper, a screensaver, title bars, and a sound scheme that all fit
together to create a unique look and feel for your device.
Touch and hold any empty area on your Home screen until the device vibrates.
2
Tap Wallpapers and select an option.
You can also change your Lockscreen wallpaper or set the same image for both your
Homescreen and Lockscreen. Follow the steps above, then tap Album. Tap the desired image
and choose an option.
To set a theme
1
Touch and hold an empty area on your Home screen until the device vibrates.
2
Tap Themes.
3
Choose an option:
•
To use an existing theme, select the theme, then tap APPLY THEME.
•
To download a new theme, tap GET MORE THEMES.
When you change a theme, the background also changes in some applications.
Taking a screenshot
You can capture still images of any screen on your device as a screenshot. Screenshots
you take are automatically saved in Album.
To Take a Screenshot
1
Press and hold down the power key until a prompt window appears.
2
Tap
.
You can also take a screenshot by pressing and holding the power key and volume down key
at the same time.
To View Your Screenshot
1
Double-tap the status bar to display the Notification panel.
2
Tap the screenshot.
You can also view your screenshots in the Album application.
Notifications
Notifications inform you of events such as new messages and calendar notifications as
well as activities in progress, such as file downloads. Notifications appear in the following
places:
To open the Notification panel, drag the status bar downward, or simply doubletap it.
2
To close the Notification panel, drag or flick the panel upward.
After opening the Notification panel, you can access the Quick Settings panel by dragging the
status bar down again.
To Take Action on a Notification in the Notification Panel
•
Tap the notification.
You can directly reply to chat or email messages in the Notification panel.
To Dismiss a Notification from the Notification Panel
•
Swipe the notification left or right.
Not all notifications can be dismissed.
To change settings for notifications, simply drag the notification slowly to the left or right, then
tap .
To Expand a Notification on the Notification Panel
•
Simply tap to expand and view more information about the notification without
opening the app.
Not all notifications are expandable.
To Clear All Notifications from the Notification Panel
•
Tap
CLEAR ALL
.
To Take Action on a Notification from the Lockscreen
•
Double-tap the notification.
To Dismiss a Notification from the Lockscreen
•
Swipe the notification left or right.
To Expand a Notification on the Lockscreen
•
Drag the notification downward.
Not all
notifications are expandable.
Managing Notifications on the Lockscreen
Show all notification
content
Hide sensitive
notification content
Don't show
notifications at all
Get all notifications on the lockscreen. When you have this setting turned on, keep in
mind that all content (including the content of incoming email and chat messages) will
be visible on your lockscreen unless you designate the relevant apps as Hide sensitivecontent in the App notifications settings menu.
You must have a PIN, password, or pattern set up as your screen lock in order for this
setting to be available. Contents hidden is displayed on the lockscreen when sensitive
notifications arrive. For example, you'll get a notification for an incoming email or chat,
but the content won't be visible on your lockscreen.
To Select the Notifications to Display on the Lockscreen
1
From your Home screen, tap .
2
Find and tap Settings > Notifications.
3
Tap , and then tap On the lock screen.
4
Select an option.
You can keep notifications on the lockscreen until you swipe to dismiss them. To enable this
feature, tap the Keep notifications on lock screen slider.
Setting the Notification Level for an App
Block all
Sounds and vibrations off
Interrupts Priority only
Never receive notifications from the selected app.
Receive notifications but without sound, vibration, or peeking into view.
Receive notifications from this app even when Do not disturb is set to Priority
only.
To Set the Notification Level for an App
1
From your Home screen, tap
2
Find and tap Settings > Notifications.
3
Select the desired app.
4
Tap the sliders to adjust notification settings as desired.
.
Notification Light
The notification light informs you about battery status and some other events. For
example, a flashing white light means there is a new message or a missed call. The
notification light is enabled by default but can be disabled manually.
When the
such as when the battery level falls below 15 percent.
To Enable or Disable the Notification Light
1
From your Homescreen, tap .
2
Find and tap
3
Tap the slider beside Notification light to enable or disable the function.
notification light is disabled, it only lights up when there is a battery status warning,
A Wi-Fi connection is enabled and data is being transmitted
A Wi-Fi connection is enabled but there is no internet connection.
This icon also appears when you are trying to connect to a secured Wi-Fi
network. After successful login, the exclamation point disappears.
If Google™ is blocked in your area, the exclamation point may appear even
when the device is connected to a Wi-Fi network and there is a working internet
connection.
Battery status
The battery is charging
Airplane mode is activated
The Bluetooth® function is activated
The microphone is muted
The speakerphone is on
Do Not Disturb mode is activated
Vibrate mode
An alarm is set
GPS is activated
Synchronization is ongoing
Problem with sign-in or synchronization
Depending on your service provider, network, or region, the functions or services represented
by some icons in this list may not be available.
To Manage Status Bar Icons
1
From your Homescreen, tap .
2
Find and tap
3
Mark the checkboxes for the system icons that you want to appear in the status