SONIQ Qplay MC9 Operation Manual

Web: www.soniqav.com

Customer Hotline: [phone]

1

Please take the time to familiarize yourself with your new system before using it for the first time so that it
can bring you best performance over a long and trouble free service life.

Important recommendations

* Please keep these operating instructions in a safe place for future reference.
* Avoid installing the system in the locations described below:

Places exposed to direct sunlight or close to heat sources such as electric heaters.
Over other stereo system components that release excessive heat.
Poorly ventilated or dusty places.
Places exposed to constant vibration.
Damp places.

* Avoid obstructing ventilation openings.

Always use the switches and knobs as described in these instructions.

* Before powering up the system for the first time, ensure that the electric power cord is installed

correctly.

* Store your cassettes or CDs in a cool place to avoid heat damage.

Never attempt to remove screws or open the system's case. There are no user serviceable parts inside.
Always refer servicing to qualified service personnel.

DANGER

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSON

DANGEROUS VOLTAGES

This system contains dangerous voltages of sufficient magnitude to present a risk of electric
shock

WARNING

This manual contains important operating and maintenance instructions. For your own
safety, you should always refer to this manual.

DANGER: TO AVOID ANY FIRE HAZARD OR RISK OF ELECTRIC SHOCK, NEVER EXPOSE THIS

SYSTEM TO DAMP CONDITIONS OR TO LIQUID PROJECTIONS.

Note:

This system will tend to heat up when used for long periods of time. This is a normal phenomenon and not
an indication of any problem affecting the system.
This CD player contains microprocessors that may be affected by electrical or outside interference. If the
CD player does not work properly, disconnect it from the mains power supply, then reconnect it.

2

LAYOUT OF CONTROLS AND OTHER COMPONENTS

1. SPEAKER

2. CD TRAY

3. CD TRAY AUTOMATIC OPEN/CLOSE BUTTON

4. MULTIFUNCTION DISPLAY

5. RANDOM BUTTON

6. SLEEP/TIMER BUTTON

7. PRESET EQ BUTTON

8. MUTE BUTTON

9. SNOOZE BUTTON

10. MODE/TIME REMAIN BUTTON

11. ON/STANDBY INDICATOR LIGHT

12.

13. INFRARED SENSOR

14. CD BUTTON

15. REPEAT/REVIEW MEMORY BUTTON

16. TUNING/SKIP/SEARCH UP BUTTON

POWER/STANDBY BUTTON

17. PLAY PAUSE/PAUSE BUTTON

18. MEMORY/SET TIME BUTTON

19. STOP/BAND BUTTON

20. TUNING/SKIP/SEARCH DOWN BUTTON

21. VOLUME KNOB

22. TUNER BUTTON

23. TAPE BUTTON

24. HEADPHONE JACK

25. CASSETTE RECORD BUTTON

26. CASSETTE PLAY BUTTON

27. CASSETTE REWIND BUTTON

28. CASSETTE FAST FORWARD BUTTON

29. CASSETTE STOP/EJECT BUTTON

30. CASSETTE PAUSE BUTTON

31. CASSETTE DOOR

1

2

3

7

6

5

4

8

10

9

17

16

15

18

20

19

12
13

14

22

21

23

11

24

25 26 27 28 29 30

31

3

38. SPEAKER TERMINALS

39. BEAT CUT/FM MONO/STEREO

40. MAIN SYSTEM POWER SWITCH

41. VOLTAGE SELECTOR (110/220 V - OPTIONAL)

42. MAINS POWER CORD

32. CASSETTE KNOB DOOR

33. MEMORY BACKUP BATTERY COMPARTMENT COVER

34. FM ANTENNA

35. FM ANTENNA TERMINAL (75 OHM - OPTIONAL)

36. AM ANTENNA TERMINAL (OPTIONAL)

37. RESET BUTTON

33

32

35

34

36

37

38

39

40
41

42

LAYOUT OF CONTROLS AND OTHER COMPONENTS