SONIQ QPC60B User Manual

Overview of The Player

Dripping Warning: The product shall not be exposed to dripping or splashing and no items filled with liquid like a filled glass or vase or cup, shall be placed on the product.

Ventilation Warning: The ventilation openings of the product shall not be intentionally covered.

The mains plug is used as disconnect device, the disconnect device shall

remain readily operable.

111213

1 234

15 1516 17 1 8

5 678 9

19 20 21 22

LOCATION OF CONTROLS

1. VOLUME CONTROL

2. SKIP DOWN BUTTON

3. SKIP UP BUTTON

4. PLAY/PAUSE BUTTON

5. POWER INDICATOR

6. USB/CARD BUTTON

7. CD DOOR

8. MODE BUTTON

9. FM ST. INDICATOR

10. CD DOOR OPEN AREA

11. STOP BUTTON

12. PROGRAM/EQ BUTTON

14. TUNING CONTROL

15. SPEAKERS

16. USB PORT

17. LCD DISPLAY

18. SD/MMC CARD SLOT

19. PHONES JACK

20. FUNCTION SWITCH

21. BAND SWITCH

22. AUX JACK

23. FOLDING HANDLE

24. BATTERY COMPARTMENT

25. FM TELESCOPIC ANTENNA

26. AC SOCKET

13. 10+/ALBUM BUTTON

FAMILIARIZE WITH THE DISPLAYED CONTENTS IN THE LCD

1 2

14 17

15 16

8 9 10

1. "PROG" shows during Programming and in programmed play.

2. "RANDOM" shows when in RANDOM playback.

3. "INTRO" shows when in INTRO playback.

4. "WMA" shows when the file played is in WMA format.

5. "MP3" shows when the disc played is an MP3-CD.

6. "CD" shows when the disc played is a CD-DA.

7. "REPT" shows when in various repeat modes.

8. "1" shows together with "REPT" when in single track repeat mode.

9. "DIR" shows together with "REPT" when in album repeat mode.

10. "ALL" shows together with "REPT" when in all tracks repeat mode.

11. This shows when the player reads data from USB data traveller.

12. This shows when player reads data from SD/MMC card.

13. This figure is the album number of the disc played.

14. This figure is track number of the current album on a MP3 disc or the current track number on a CD disc.

15. This figure is the elapsed minutes of the track played.

16. This figure is the elapsed seconds of the track played.

17. English Text display. The information of the current track is displayed

scrolling forward in MP3 playback.

Power Supply

POWER SUPPLY

qBATTERY OPERATION

1. Remove the battery compartment cover gently.

2. Install 8 x 'C' size batteries (UM-2 or equivalent) while observing the correct polarities.

3. Replace the battery compartment cover.

NOTE:

= The AC cord must be detached from the AC socket of the player. = Leaking batteries may damage the battery cabinet and the player as a

whole, so they should be removed from the cabinet when becoming flat or when the player is not to be played on batteries for some time.

qAC OPERATION

Insert the AC cord to the AC socket of the player, and plug the other end to an applicable wall outlet. NOTE: If the AC plug of this unit does not fit in with your AC outlet, a plug adaptor should be used. Consult your local dealer on the type of plug adaptor.

Operation

TO PLAY THE RADIO

1. Set the FUNCTION switch to the RADIO position, the POWER Indicator will light up.

2. Select the desired band with the BAND switch.

3. Tune to the desired station by rotating the TUNING control (rotate that control back and forth until you get the strongest and clearest reception).

4. The built-in AM antenna and external FM TELESCOPIC ANTENNA are directional.

= For AM broadcast, rotate the whole set until the best reception is heard.

5. Adjust the volume level to a comfortable listening level.

6. To turn off the radio, set the FUNCTION switch to the OFF, USB/CARD, CD/MP3/AUX position.

you are receiving an FM broadcast, fully extend the TELESCOPIC

When ANTENNA and rotate it for the best reception.

+ 3 hidden pages