SONIQ M301R, M301C Instruction Manual

-1-

M301R / M301C

Bluetooth turntable multi-function player

Instruction manual

Read this instruction manual carefully before use

-2-

Product features

33/45/78 RPM selectable turntable

Automatic / manual stop turntable

Belt driven system

Bluetooth connection for music playback

Direct USB/SD encoding for turntable, FM radio & AUX IN

Aux in for connection of other device (eg. CD & MP3 player)

USB/SD slot for MP3 playback

PLL radio with preset AM & FM stations

Clock / Sleep function

LCD display with blue backlight

RCA line-out

Stereo built-in speaker

External power adaptor, 45RPM adaptor & remote control

Location of Control

1) SPEAKER

2) STANDBY

3) REMOTE CONTROL RECEIVER

4) STANDBY INDICATOR

5) FUNCTION

6) BT-PLAY/PAUSE

7) LCD

8) BT-PREV

9) BT-NEXT

10) SLEEP

11) SPEAKER

12) VOLUME

13) EARPHONE JACK

14) REC/DEL

15) MODE/CLK

16) USB SLOT

17) PLAY/PAUSE

/SCAN

18) STOP

/ BAND

19) SD/MMC CARD SLOT

20) TUNING/SKIP

21) TUNING/SKIP

-3-

22) AUX IN JACK

23) ALBUM/PRESET UP & DOWN

24) DUST COVER

25) RCA LINE-OUT JACK

26) RCA LINE-OUT JACK

27) EXTERNAL POWER ADAPTOR JACK

28) FM ANTENNA

29) 45RPM ADAPTOR

30) LIFT LEVER

31) AUTO STOP ON/OFF SWITCH

32) 33/45/78 RPM SELECTOR

33) TONE-ARM

Caution

Usage of controls or adjustments or performance of procedures other than those specified herein may result in

hazardous radiation exposure.

This unit should not be adjusted or repaired by anyone except qualified

service personnel.

Warning

1. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as

vases, shall be placed on the apparatus.

2. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or

the like.

3. The mains plugs or an appliance coupler is used as the disconnect device, and the disconnect device shall

remain readily operable.

Precautions for Use

Installation

1. Unpack all parts and remove protective material.

2. Do not connect the unit to the mains before checking the mains voltage and before all other connections have

been made.

3. Do not cover any vents and make sure that there is a space of several centimeters around the unit for

ventilation.

Connection

1. Connect external power adaptor to EXTERNAL POWER ADAPTOR JACK.

2. Push the STANDBY button to switch on the unit, STANDBY INDICATOR will be off. If the backlight on the