How it Works
SONIQ
Loading...
CSA51-AU
Instruction Manual
9 pgs784.19 Kb0

SONIQ CSA51-AU Instruction Manual

Download
Page 1
MODEL:CSA51-AU
5.1 Computer Speaker
MD11112 2-01
Page 2
CAUTION
!
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTE­NANCE (SERVICING) INSTRUCTIONS IN THE LITERA­TURE ACCOMPANYING THE APPLIANCE.
Safety Precautions
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Safety Information
Page 3
Caution: Please read carefully all the following important safeguards to ensure safe operation.
1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions should be retained for future reference.
3. Follow Instructions - All operating instructions should be followed.
4. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
5. Power Source - The appliance should be connected to a power supply only of the type specified in the operating instructions or as marked on the appliance.
6. Power-cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
7. Water and Moisture - The appliance should not be used near water(for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.)
8.Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. Do not use the appliance on a bed, sofa, rug or similar surface that may block the ventilation openings.
1.Power Supply................................................................. 240V~ 50Hz
2.Power output(RMS @10% THD)..............................................125W
3.Input Sensitivity (Subwoofer).......................................300mV±50mV
4.Input Sensitivity (Satellite)...........................................750mV±50mV
5.Speaker Impedance (Subwoofer)............................................8 Ohm
6.Speaker Impedance (Satellite).................................................8 Ohm
7.S/N (A Weight)...........................................................................75dB
8.Subwoofer Power Output ...........................................................50W
9.Front Speaker Power Output ..................................................15Wx2
10.Center Speaker Power Output .................................................15W
11.Rear Speaker Power Output .................................................15Wx2
12.THD (1kHz, 1W).......................................................................0.8%
14.Frequency Response........................................ 20Hz~20kHz±5dB
15.L/R Separation (1kHz)..............................................................30dB
16.L/R Balance (Stereo)...............................................................±2dB
Note: Specifications are subject to change for improvements.
Specifications
Important Safeguards
2
15
Page 4
radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
10. Non use Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.
11. Damage requiring service - The appliance should be serviced by qualifiedservice personnel when:
a/ The power-supply cord or the plug has been damaged; or b/ Objects have fallen or liquid has been spilled into the appliance; or c/ The appliance has been exposed to rain; or d/ The appliance does not appear to operate normally or exhibits a marked change in performance; or e/ The appliance has been dropped, or the enclosure damaged.
12. Servicing - The user should not attempt to service the appliance beyond that specified in the operating instructions. All other servicing should be referred to qualified service personnel.
13. Clean only with dry cloth.
14. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult and electrician for replacement of the obsolete outlet.
15. Unplug this apparatus during lightning storms or when unused for long periods of time.
9. Heat - Keep the appliance away from heat sources such as
1. NO OUTPUT
(1) Check whether the system is connected correctly. (2) Check whether the Volume is set at minimum. Adjust it accordingly. (3) Check whether the Audio Input is in PLAY mode.
2. NO SOUND FROM FRONT LEFT SPEAKER
(1) Check whether the system is connected correctly with the Front Left speaker. (2) Check whether the Balance function is switched off. Adjust it accordingly. (3) Check whether the system is connected correctly with the audio source.
3. NO SOUND FROM FRONT RIGHT SPEAKER
(1) Check whether the system is connected correctly with the Front Right speaker. (2) Check whether the SW MODE is switched off. Adjust it accordingly. (3) Check whether the system is connected correctly with the audio source.
4. NO SOUND FROM CENTER SPEAKER
(1) Check whether the system is connected correctly with the Center speaker. (2) Check whether the system is connected correctly with the audio source. (3) Check whether 5.1CH is selected as audio output.
5. NO SOUND FROM REAR SPEAKER
(1) Check whether the system is connected correctly with the Rear speaker. (2) Check whether the system is connected correctly with the audio source. (3) Check whether 2.1CH is selected as audio output. (4) Check whether 5.1CH is selected as audio output.
Tro ub le S ho ot in g
Important Safeguards
14
3
Page 5
2. Power standby .Indicator
G. SURROUND(MODE) DECODER
1. Connect and place Center and Rear speakers properly.
2. Press the MODE button on the remote controller to select Surround Decoder for Home Theater system effects.
1. Remote Sensor.
4. 5.1 Channel Input Indicator.
3. AUX .Input Indicator
1. Connect the system properly. 5.1(6CH) Channels audio output must comply with 5.1 channels audio input.
2. Press INPUT button on the remote controller to shift the status from audio input to 5.1CH(6CH) channels input.
3. Adjust all output settings including VOLUME, SW, FRONT,CEN, SURR (if necessary) now to enjoy the wonderful and tremendous Home Theater effects.
4. To change the options from 2.1 CH to 5.1CH, select INPUT button as AUX(AU ON DISPLAY SCREEN) and then press MODE to change accordingly.
I. MUTE
1. Press the MUTE button on the remote controller once to keep the performance silent.
2. Press it again to resume the performance.
J. RESET
Press the RESET button on the remote controller and it will reset all settings including SW Speaker output, Front Speaker output ,CENTER Speaker output, Surround Speaker output to Factory Default settings.
H. 5.1 CHANNELS INPUT
INPUT
1 2 3 4
Front Panel - Controls And Functions
Operating Instruction
4
13
Page 6
D. FRONT SPEAKER
1. Press FRONT + button on the remote controller to maximize the Front Speaker output.
2. Press FRONT - button on the remote controller to minimize the Front Speaker output.
E. CENTER SPEAKER
1. Press CEN+ button on the remote controller to maximize the Center Speaker output.
2. Press CEN - button on the remote controller to minimize the Center Speaker output.
F. SURROUND SPEAKER
1. Press SURR + button on the remote controller to maximize the Surr­ ound Speaker output.
2. Press SURR - button on the remote controller to minimize the Surr­ ound Speaker output.
1 2 3 4 5 6 7 8 9
10 11
Operating Instruction
Rear Panel - Controls And Functions
12
5
240V~ 50Hz
Page 7
A. Switch On/Off the Product
1. Before turning on the system, please connect it according to the
System Connection Instruction.
2. Connect AC power supply with this product.
(Caution: Power source must be consistent with this product.)
B. VOLUME
1. Press the
sound output.
Volume is increased to maximum accordingly.
VOL + button on the remote controller to maximize the
2. Press the
sound output.
Volume is decreased to minimum accordingly.
VOL - button on the remote controller to minimize the
C. SUB WOOFER SPEAKER
1. Press SW + button on the remote controller to maximize the Sub
woofer Speaker output.
2. Press SW - button on the remote controller to minimize the Sub
woofer Speaker output.
1. 2CH Right Audio Input.
2. 2CH Left Audio Input.
3. 5.1CH Center Audio Input.
4. 5.1CH Subwoofer Audio Input.
5. 5.1CH Rear Right Audio Input.
6. 5.1CH Rear Left Audio Input.
7. 5.1CH Front Right Audio Input.
8. 5.1CH Front Left Audio Input.
9. Speaker Output.
SR: Rear Right Speaker Output.
SL: Rear Left Speaker Output.
CEN: Center Speaker Output.
FL: Front Left Speaker Output.
FR: Front Right Speaker Output.
10. Power On/Off Switch.
11. AC Power Cord.
Rear Panel - Controls And Functions
Operating Instruction
6
11
Page 8
Use the SPEAKER OUTPUT jacks on the rear panel of main unit to connect the satellite speakers.
Note: Be sure to match the speaker cord to the appropriate jacks on components: "White" to "Red", and "Black" to "Black".
3. FRONT +: Rear Right Balance Output Up.
5. CEN -: Centre Output Down.
4. FRONT -: Rear Right Balance Output Down.
13. SW +: Sw Output Up.
14. VOLUME +: Main Volume Up.
6. SW -: Sw Output Down.
7. VOLUME -: Main Volume Down.
8. MUTE: mute button.
10. RESET: Location retrieval.
9. MODE: .mode button
1. INPUT: Input Switch.
12. SURR -: Surround Balance Output Down.
2. CEN +: Centre Output Up.
11. SURR +: Surround Balance Output Up.
FRO NT RIGH T SPE AKER
FRO NT LEFT SPE AKER
CEN TER SPE AKER
REAR LEFT SPEAKER
REAR RIGHT SPEAKER
1 2 3
4 5 6
7
8 9 10
11
12
13
14
System Connection Instructions
Operating Instruction - Controls And Functions
10
7
Page 9
1. Before using the remote controller, please insert correct type of batteries into the battery compartment.
2. The remote controller uses 2x1.5V/AAA batteries.
3. Please insert the batteries as indicated below. a/ Remove the battery compartment cover.
b/ Insert 2 batteries as per the polarities marked inside the battery compartment.
c/ Replace the battery cover.
4. If the remote controller is of no function, please check the batteries
or change new batteries before consulting technical personnel.
Subwoofer
TO Stereo Output
(Optional)
Woof er Rear -L
Rear -R
Fron t-L
Fron t-R
Cent er
Optical
Audio Out
Rear-R
Center
Woofer
Rear-L
Front-L
Coaxial
Front-R
Video Out
Scart out
Video
S-Video
U
VY
Manufactured under license from Dolby Laboratories.
"Doldy","Dolby Digital", and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished Works.
@1992-1997 Dolby Laboratories, Inc.
All rights reserved.
Apparatus Claims of U.S. Patent Nos. 4,631,603;4,577,216;4,819,098 and 4,907,093 licensed for limited viewing uses only.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
!
AC 100V~240V 50/60Hz
DVD Player
Video In
Video Out
TV
Operating Instruction - Controls And Functions
System Connection Instructions
8 9
240V~ 50Hz
240V~ 50Hz
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use