Page 1
Page 2
Output Power: Subwoofer:8W
Satellite:3Wx2
Speaker Unit: Subwoofer:4"
Satellite: 2"x2
Impedance: 4Ω
Frequency Response: Subwoofer:80Hz-250Hz
Satellite:180Hz-18KHz
Power Source: AC240V,50 Hz
Signal-to-Noise Ratio: ≥75dB
Dissociation: ≥40dB
Control: Volume, Bass, Power on/off, H ea dp ho ne o ut pu t
Dimension:
Subwoofer: 190x190x215mm(WxDxH)
Satellite: 87x85x175mm(WxDxH)
Packing Size: 260x230x325mm(WxDxH)
Gross Wei gh t: 2 .8 5k g
Congratulations on your purchase of this quality product. Multimedia
speaker systems will bring an exciting new sonic dimension to computer
games, music, movies and multimedia presentations. Before installation,
please read this manual carefully to avoid electrical shock, personal
injury, an d da ma ge t o th e pr od uc t.
War nin gs an d Pre cau tio ns
The technical specifications are subject to change without notice.
Page 3
1. One subwoofer
2. Two s at el li te u ni ts
3. Instruction manual (this booklet).
4. Wa rr an ty C ar d
Layout of the back panel
This often happens on newly set up computers. The re i s so un d fr om o ne
side when plugging the 3.5mm stereo mini-plug into the headphone jack
of CD-ROM. Because there is only one track of audio signal transmitted
from the audio equipment, please check the audio system carefully.
This system is magnetically shielded and it’s f re e fr om m ag ne ti c in te rf er ence even located near to the monitor or TV. But the amplifier magnetism
will cause magnetic interference or magnetization if the speakers is
located too close to the monitor or TV. Please locate the speakers at
least 30cm away from the monitor or TV.
Hea dphon e socke t
Pow er swit ch
Volu me cont rol
1. S terminal plug for right
satellite unit
2. RCA plug for left satellite
unit
3. Signal input terminal
(3.5mm plug)
4. AC power cord
5. Power on/off s wi tc h
6. Volume control
2. No super bass
Adjust the bass control on the subwoofer, and check if the audio signal
has frequency under 200Hz.
Pow er indi cator l ight
(Fig ur e 1)
(Fig ur e 2)
Tro ubl e sho oti ng
Please refer to figure 1 and be sure you have all these items. Please
contact the retailer if any of these items are missing. Save this manual
for future reference.
1. Connect the wire of the left satellite unit into the RCA socket on the back
panel of the subwoofer marked “L-SPEAKER” (see figure 2)
2. Connect the wire of the right satellite unit into the S terminal socket on
the back panel of the subwoofer marked “R-SPEAKER”(see figure 2)
3. Connect the signal wire to the LINE OUT te rm in al ( or t he h ea dp ho ne j ac k
if a LINE OUT is un av ai la bl e) o f th e PC o r ot he r au di o eq ui pm en t.
(see figure 2)
4. Connect the AC power cord to an electrical outlet. Press the power switch
to turn on the speaker system, and turn your PC on, then play music with
the audio equipment. Adjust the volume control,bass control of the
speaker system, along with the controls of your PC or stereo system to
your liking. You could now enjoy your new Multimedia speaker system.
Make sure to turn off y ou r co mp ut er o f au di o eq ui pm en t. Tu rn d ow n al l
volume controls before you start set-up procedure.
Loading...