Output Power: 2.5Wx2(RMS)
Speaker Unit: 2"x2
Impedance: 4Ω
Frequency Response:140Hz-18KHz
Power Source: DC5.5V
Signal-to-Noise Ratio: ≥75dB
Dissociation: ≥40dB
Control: Volume, Power on/off, Headphone output
Dimension: 87x85x175mm(WxDxH)
Packing Size: 182x98x178mm(WxDxH)
Gross Weight: 0.67kg
Warnings and Precautions
Congratulations on your purchase of this quality product. Multimedia
speaker systems will bring an exciting new sonic dimension to computer
games, music, movies and multimedia presentations. Before installation,
please read this manual carefully to avoid electrical shock, personal
injury, and damage to the product.
The technical specifications are subject to change without notice.
1. System includes one main speaker and one auxiliary speaker.
2. Instruction manual (this booklet).
3. Wa rr an ty C ard
Please refer to figure 1 and be sure you have all these items. Please
contact the retailer if any of these items are missing. Save this manual
for future reference.
2
1
Make sure to turn off your computer or audio equipment. Turn down all
volume controls before you start set-up procedure.
1. Connect 3.5 mm stereo signal line to 3.5 mm stereo output interface of
a device such as computer, CD, MP3, etc. (see figure 2)
2. Connect the USB line to USB interface on the host computer.
(see figure 2)
3. Ensure all connections correctly, press the power switch on the speaker
system, and then play the music of audio equipment. Adjust the volume
control, Now you can enjoy the new multimedia speaker system.
4
3
5 9
(Figure 1)
Layout of the back panel
To Audio o utput s ocket s
(co mpute r/CD/ MP3 etc .)
1
2
To comp uter US B conne ctor
(Figure 2)
6
8
1.Auxiliary speaker
7
2.Main speaker
3.Power indicator light
4.Power switch
5.Volume control
Trouble shooting
6.Signal input wire
7.DC input wire(USB)
8.Owners’ manual
9.Headphone socket
This often happens on newly set up computers. There is sound from one
side when plugging the 3.5mm stereo mini-plug into the headphone jack
3
of CD-ROM. Because there is only one track of audio signal transmitted
from the audio equipment, please check the audio system carefully.
This system is magnetically shielded and it’s free from magnetic interference even located near to the monitor or TV. But the amplifier magnetism
will cause magnetic interference or magnetization if the speakers is
1.Signal input wire
2.DC input wire(USB)
located too close to the monitor or TV. Please locate the speakers at
least 30cm away from the monitor or TV.
3.Connecting line
Loading...