SONIQ CSA10 User Manual
Introduction
Thank youfor choosing ourmodel CSA10A-AU Audio Speaker.
In orderto use allfunctions of thisSpeaker properly,please read this
instruction carefullybefore using andkeep for futurereference.
This desktopSpeaker with 2.0CH audio system,isspecially
designed forPC MP3.
The manualadopting illustration isfor introducing functionsand
operation ofthis Speaker moreintuitively.Due to technology
development andthe difference of production batch,it may differ
slightly whenusing.Please accord toactual product.
、
：
-1-
Contents
Introduction
Contents
Warning
1.Safeguards
Checking what’s in the box
Product description
Use
Specification
2.Troubleshooting
Warning
1
2
3
4
4
6
7
8
8
●
Read andComply with thismanual
Please read carefully before using and comply with all safety
and handlinginstruction.
Clean
●
Before clean, please pull out plug from wall socket and other
sources. Don’t use liquid detergent or NEB, use soft dry cloth
to clean.
●
Put
Please don’t put the audio system to high temperature or high
，.
humidity keepit in steadyplaces
●
Power
The Speaker must be used with appointed voltage to avoid
damaging. Pleasepull out powerplug when notused for long.
●
Maintenance
Laymen please don’t open or remove the case to repair in order
to avoidelectric shocking orother danger.
Warning
Water and Moist
●
Please avoid using in moist environment (such as bathroom).
To avoid accident,please do not put water container like vase
on theside of thisSpeaker
Warning:To prevent the risk of fire or fulminous,please
do notput this unitin the rainor moist places.
1 Safeguards
.
1.1 Checking what’s in the box
Please checkthe accessories inthe box(see figure1):
(pls putthe unit inlevel)
●
NO.1 Speaker SET
●
NO.2 Manual
.
1
1PCS
Use
1.3 USE
(1)Having connectedyour speakers,insert USBpower source,then
press drive-by-wirepower switch,the LEDindicating that the
speaker isnow on.(Attention:Conneting the speakers first,then
insert USBpower and pressthe power switch.Otherwise,it can’t
work properly)
(2)Having connectedsound source,turn volumeswitch to control
your volume.
(3)Moving thespeaker to getyour best sound.(seefigure3)
PC
Figure 3 Connecting
7
Specification
1.4 Specification
●
2.0CH track,SPK:1 ×2
●●
Maximum outputpower:4W×2 Input:AUX/MP3
●●Frequency:130HZ -20KHZ DC input:USB5V
● Size:40×50×40mm(W×H×D)
2.Troubleshooting
When youmeet the problemsbellows,please try tosolve:
Problem
No sound
Note:The pictureis only forreference, please makethe object asthe criteria.
1.Check thesound source isconnected correctly into
the speaker.
2.Ensure thesound source playnormally.
3.Turn up volume switch,and check output of sound
source unitis normal.
4.Check thepower is connectedcorrectly.
5.Check drive-by-wirepower switch wasturned off.
"
● Rated output power:1W×2
Solutions
8
Checking what’s in the box
UserManuel
NO.2
5
NO.1
Figure 1
Product description
1.2 Productdescription see figure2（）
①② ③LED light Power switch Volume Switch
④⑤ ⑥Main Speaker AUX MP input USB connector/ 3
⑤
⑥
①
②
③
Figure 2
6
④
Loading...