Page 1
FEATURES
Loud 85 dB buzzer sounds for up to 3 days.
Intermittent chirp signals low battery.
Sensor with suction cup may be placed up to 6
feet from the alarm unit.
Convenient self-test button.
TO ACTIVATE UNIT
1. Remove the 2 screws from back of the larger unit
and attach a 9-volt battery (alkaline recommended), being sure to press the clips firmly in place.
2. Reassemble the 2 halves.
3. Press test button and hold for 2 seconds. If the
unit is properly assembled, the alarm buzzer will
sound.
FOR LEAK DETECTION
Place the sensor (suction cup up) at the lowest point
of the floor or other horizontal surface where water
collects.
FOR UNATTENDED FILLING OF POOLS, SPAS, ETC.
Use suction cup to attach sensor to smooth vertical
surface. Buzzer will sound when water reaches both
metal contacts on the sensor.
SONIN INC.
Phone: 800-223-7511 Website: www.sonin.com
© 2003 Sonin Inc. All Rights Reserved
Printed in China
Model 10700
Reference Guide
Water Alarm
with Remote Sensor
WARNING
Long term exposure to loud sounds may be harmful
to your hearing.
NOTE
Test device periodically by pressing test button on
front of unit. Read all instructions carefully and save
for future reference.
Warranted against all defects in workmanship and
materials for one year from date of original purchase.
TECHNICAL ASSISTANCE
If you have any questions or need technical assistance,
e-mail to: [email protected]
CUSTOMER SERVICE
SONIN takes pride in offering unmatched customer
service to owners of SONIN products. If you have any
questions or would like additional information,
please call: 1 - 800 - 223 - 7511 (USA)
or e-mail to: [email protected]
Water Alarm
Water Alarm
Loading...