Sonicwall 034 Users Manual

SonicWALL Internet Security Appliance

Regulatory Statement and Safety Instructions

Regulatory Model/Type Product Name
APL11-027, APL11-031 SOHO TZW

APL10-01F TELE3 SP (Class B)
APL12-028 TELE3 SPi
APL04-01E TELE3 TZ and PRO 100 (Class B)
APL11-024 TELE3 TZX (Class B)
APL04-022 T ELE3 (Class B) and SOHO3 (Class B)
APL04-016 PRO 100 (Class A)
APL04-017 T ELE3 (Class A) and SOHO3 (Class A)
APL11-029 T Z 170
1RK05-015 PRO 200 and PRO 300
1RK07-025 PRO 230
1RK08-026 PRO 330
1RK0A-02A PRO 2040
1RK09-032 PRO 3060 and PRO 4060

Models APL04-016, APL04-017,1RK05-015, 1RK07-025, 1RK08-026, 1RK0A-02A,
and 1RK09-032 are FCC Class A devices (for office use only), and the following statement is
applicable to these models*:

FCC Part 15 Class A Notice

NOTE: This equipment was tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy. And if
not installed and used in accordance with the instruction manual, the device may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user is required to correct the interference at
his own expense.

Complies with EN 55022 Class A and CISPR22 Class A.

Page 1

*Refer to the label on the bottom of the unit for device information including Class A or Class
B FCC information.

Caution: Modifying this equipment or using this equipment for purposes not shown in this
manual without the written consent of SonicWALL, Inc. could void the user’s authority to
operate this equipment.

BMSI Statement

VCCI Statement

Page 2

Canadian Radio Frequency Emissions Statement

This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à toutes la norme NMB-003 du Canada.

CISPR 22 (EN 55022) Class A

Warning: This is a class A product. In a domestic environment, this product may cause radio

interference in which case the user may be required to take adequate measures.

Decl ar ation of Con f o rm it y

Application of council Directive Directive 89/336/EEC (EMC) and

72/23/EEC (LVD)

Standards to which conformity is declared EN 55022 (1998) Class A

EN 55024 (1998 ) A1 (200 1)
EN 61000-3-2 (2000)
EN 61000-3-3 (1995) A1(2001)
EN 60950 (2000 )

National Deviations: AT, AU, BE, CH, CN, CZ,
DE, DK, FI, FR, GB, GR, HU, IE, IL, IN, IT, JP,
KR, NL, NO, PL, SE, SG, SI

Page 3

Class B Information

Models APL11-027, APL11-031, APL04-01E, APL10-01F, APL04-022, APL11-024,
APL11-029, and APL12-028 are Class B devic es (for home an d office us e), and the fo llowing

statement is applicable to these models*:

FCC Part 15 Class B Notice

NOTE:This equipment was tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy. And, if not installed and used in accordance with
the instructions, may cause harm ful interference to radi o communications . However, there is
no guarantee that interference will not occur in a particular installation. If the equipment does
cause harmful interference to radio or television re ception, which can be determined by turning
the equipment off and on, the user i s encouraged to try and correct the inte rference us ing one
or mor e of th e following measures:

• R eorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from the receiver connection.

• Consult SonicWALL for assistance.
Complies with EN55022 Class B and CISPR22 Class B.

*Refer to the label on the bottom of the unit for device information including Class A or Class
B FCC information.

Canadian Radio Frequency Emissions Statement

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à toutes la norme N M B-003 du Canada.

Declaration of C onformity

Page 4

Application of council Directive Directive 89/336/EEC (EMC) and

Standards to which conformity is declared EN 55022 (1998) Class B

APL12-028 Directive 1999/5/EC (R&TTE) and standard TBR3

APL10-01F Directive 1999/5/EC (R&TTE) and standard CTR21

APL11-031 and APL11-027 Directive 1999/5/EC (R&TTE) and standard EN 300 329-2

72/23/EEC (LVD)

EN 55024 (1998) A1 (2001)
EN 61000-3-2 (2000)
EN 61000-3-3 (1995) A1 (2001)
EN 60950 (2000)

National Deviations: AT, AU, BE, CH, CN, CZ, DE, DK,
FI, FR, GB, GR, HU, IE, IL, IN, IT, JP, KR, NL, NO, PL,
SE, SG, SI

Not approved in Norway
For Sweden, safety requirements are not fulfilled unless the
equipment is connected to a wall socket-outlet with protective
earth contact (SELV circuit must be earthed.)

V1.2.1 EN 300 328-17 V

VCCI Statement

FCC part 68 Telecom Information (Model APL10-01F)

Repair Information - According to the FCC, only the modem vendor for the SonicWALL modem
is allowed to service the modem. Contact SonicWALL Technical Support for any repairs
including the modem.

The FCC has established rules which permits this device to be directly connected to the
telephone network. If this device is m alfunctioning, it may al so cause harm to th e telephone
network. This device should be disconnected until the source of the problem is determined and
the repair is made. If this is not done, the telephone company may temporarily disconnect
service.

The telephone company may make chan ges in its technic al op erations and proc edures . I f su ch
changes affect the compa tability or us e of this device, the telephone company i s required to
give adequate notice of the changes. If the telephone company requests information on the
equipment connected to their lines, inform them of the following:

• Telephone number of the line connected to the device.

• The Ringer Equivalence Number (REN) located on the bottom of the device.

• The de vice uses an RJ11-type jack.

• The FCC R egistration Number l ocated on the bottom o f the device.

FCC RF Ra diation Exposure Statement (Model APL11-027 and Model APL11-031)

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This eequipment should be installed and operated with a minimum distance of
20 centimeters (7.9 inches) between the radiator(antenna) and your body.

This transmitter must not be co-located or operating in conjunction with a ny other antenna or
transmitter.

For more information regarding the above statement, please conta ct SonicWALL, Inc. at 1143
Borregas Avenue, Sunnyvale, CA 94089-1306 or 1-408-745-9600.

Page 5