Sonic TVAdapter 2 BS-F200 Installation Manual

TV Adapter 2

Installation Guide
User Guide

www.sonici.com

Table of Contents

General Warnings 6

Introduction 8

TV Adapter 2 Overview 9

Installation 11

Activating the TV Adapter 2 for the First Time 12

Connecting the TV Adapter 2 to a Power Outlet 13

Connecting the TV Adapter 2 to the TV 14

Pairing SoundGate with the TV Adapter 2 24

Instructions for Use 29

TV Listening 30

SelectMe 33

Visual Indicators 34

Additional Information 35

Technical Information 36

Information and Explanation of Symbols 41

Service 42

03

04

05

Congratulations on the purchase of your
new TV Adapter 2 wireless accessory.
Your TV Adapter 2 is intended to be used
together with Sonic SoundGate devices
and Sonic wireless hearing instruments.
Great care and attention has been paid
to ensure that your device has the highest
quality and is easy to use and maintain.

Please read the entire contents of this booklet before
using your TV Adapter 2. It contains instructions
and important information about its use and handling.

General Warnings

Familiarize yourself with the following general
warnings before using your TV Adapter 2.

Products to be connected to external equipment

The safety of the use of the TV Adapter 2 with

the auxiliary input cable is determined by
the external signal source. When the input cable
is connected to mains-operated equipment,
this equipment must comply with IEC-60065,
IEC-60601 or equivalent safety standards.

The TV Adapter 2 is designed to comply with

the most stringent Standards of International
Electromagnetic Compatibility. However,
the TV Adapter 2 may cause interference
with other medical devices. Please contact
relevant personnel to obtain permission
before using the TV Adapter 2 in hospitals
or similar venues.

06

The TV Adapter 2 is not a toy and therefore should

be kept out of the reach of children and anyone
else who might swallow parts or otherwise cause
injury to themselves. Special attention should
be paid to smaller components in order to prevent
children from swallowing them and choking.
If a part is swallowed, see a doctor immediately.

Note!

The TV Adapter 2 must never be washed
or immersed in water or other liquids.

07

Introduction

The following items are included within your
TV Adapter 2 package and will be covered within
this instruction guide:

TV Adapter 2
Model: BS-F200

Mini jack adapterSCART adapter

Installation Guide
and User Guide

TV Adapter 2

Installation Guide
User Guide

www.sonici.com

TOSLINK cable

RCA cable

Power adapter

08

TV Adapter 2 Overview

Front view

Power indicator TV indicator

09

Back view

SelectMe

Power input

RCA connector
port left and right

TOSLINK
“IN” and “OUT”

10

INSTALLATION

11

Activating the TV Adapter 2 for the First Time

The following pages offer easy step-by-step
instructions on how to install and operate your
TV Adapter 2 device.

Before you can use the TV solution together
with your hearing instruments, the TV Adapter 2
must be connected to a power outlet and to the TV.

All needed parts for the installation are included
in the package.

12

Connecting the TV Adapter 2 to a Power Outlet

Start by connecting the TV Adapter 2 to a power outlet.
Use the power adapter included within the TV Adapter 2
packaging.

1. Plug the power cord into the power input jack
on the TV Adapter 2.

2. Plug the power supply into the mains wall socket.

3. Check that the power is turned on. After
a few seconds, the power indicator on the front
of the TV Adapter 2 will illuminate green.

13

Connecting the TV Adapter 2 to the TV

You can connect the TV Adapter 2 in four different ways.

Connection Page

TOSLINK (either digital stereo PCM
or Dolby® Digital*)

16

RCA audio output (L + R) 18
Mini jack output

(typically headphone output)

20

SCART audio output (L + R) 22

* Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks
of Dolby Laboratories.

Please see the following pages for a solution which
fits your TV.

14