Sonic SoundGate 2, Phone Adapter 2, TV Adapter 2 Connectivity Manual

1 Sonic · Bluetooth® Connectivity Guide

Effective February 1, 2014

Bluetooth® Connectivity Guide

SoundGate 2 | TV Adapter 2 | Phone Adapter 2

www.sonici.com

2 Sonic · Bluetooth® Connectivity Guide

This guide is designed to show you how to set-up and
demonstrate the various Bluetooth

®

-compatible accessories
available for use with Sonic hearing instruments
and the SoundGate 2 wireless communication link.

Equipment needed

To best demonstrate the Bluetooth®-compatible
accessories available for use, make sure you have
the following items readily available. We recommend
that you check this list at least one day before your
demonstration.

Pair of Sonic hearing instruments

A SoundGate 2

Make sure you also have the following parts that
were delivered in the original SoundGate 2 packaging:

1 Neck strap antenna

2 Wall outlet charging unit or USB charger cable

3 Charger cradle

A Bluetooth®-enabled mobile phone

1

2

3

A TV Adapter 2

Make sure you also have the following parts that
were delivered in the original TV Adapter 2 packaging:

Sonic · Bluetooth® Connectivity Guide 3

4 Power adapter

5 SCART adapter

6 RCA cable

7 TOSLINK cable

8 Mini jack adapter

A television or audio/video source
(e.g., PC or laptop computer)

A Phone Adapter 2

Make sure you also have the following parts
that were delivered in the original Phone Adapter 2
packaging:

4 5 6 87

9 10

 9 Power adapter

10 Standard analog phone cable

An analog landline phone

4 Sonic · Bluetooth® Connectivity Guide

Hearing Instruments

Pairing the hearing instruments to the SoundGate 2

1 Verify that you have new batteries for the hearing

instruments.

2 Make sure that the SoundGate 2 is fully charged

and powered ON. If not, recharge the day before your
demonstration. You may use the wall outlet power
adapter or the charging cradle, or you may charge
from a computer, laptop, or in a vehicle with the USB
charging cable.

3 The hearing instruments must be paired with

the SoundGate 2 device. Connect the hearing
instruments to the EXPRESSfit fitting software,
choose Options, select Controls, and follow
the instructions after starting the pairing process.

Tips for successful pairing

· Make sure the device has a fully charged battery

· Press the volume up key on the SoundGate 2
while holding it approximately 1
from the hearing instruments

· To confirm the link between SoundGate 2 and
the connected hearing instruments, repeat this step
by pressing the volume up key

· Don’t forget to press “Save and Quit” to save

–

1½ feet (30 – 50 cm)