Sonic 275362, NSZB 3.7 B2 Operating Instructions Manual
IAN 275362
SONIC TOOTHBRUSH NSZB 3.7 B2
SONIC TOOTHBRUSH
Operating instructions
SCHALLZAHNBÜRSTE
Bedienungsanleitung
GB / IE / NI Operating instructions Page 1
DE / AT / CH Bedienungsanleitung Seite 11
Before reading, unfold the page containing the illustrations and familiarise
yourself with all functions of the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie
sich anschließend mit allen Funktionen des Gerätes vertraut.
NSZB 3.7 B2
GB│IE│NI
│
1 ■
Contents
Introduction ........................................ 2
Intended use ...................................... 2
Package contents ................................... 2
Appliance description ................................ 2
Technical details .................................... 2
Safety information .................................. 3
Setting up ......................................... 4
First use ........................................... 4
Fitting / removing brush heads ........................ 4
Operation ......................................... 5
Brushing Teeth ..................................... 5
Cleaning and care ................................... 6
Travel lock ......................................... 7
Disposal ........................................... 7
Ordering replacement parts .......................... 7
Kompernass Handels GmbH warranty ................. 8
Service .....................................................9
Importer ....................................................9
NSZB 3.7 B2
■ 2 │ GB
│IE│
NI
SONIC TOOTHBRUSH
Introduction
Congratulations on the purchase of your new device.
You have selected a high-quality product. The operating instructions are part
of this product. They contain important information about safety, usage and
disposal. Before using the product, please familiarise yourself with all operating
and safety instructions. Use the product only as described and for the range of
applications specified. Please also pass these operating instructions on to any
future owner.
Intended use
This appliance is intended exclusively for personal dental care at home. This
appliance is intended solely for use in private households. The appliance is
not intended for use in industrial or medical environments. It is not suitable for
animal care. Do not use it for commercial purposes.
Package contents
Handset
8 brush heads
Charger
Operating instructions
NOTE
Check contents for completeness and damage immediately after unpacking.
Contact customer service if necessary.
Remove all packaging materials and plastic films from the appliance.
Appliance description
Brush head
Drive shaft
Lid
Brush holders
Charger
Charge indicator
"
Pulse" LED (yellow)
"
Soft" LED (green)
"Clean" LED (orange)
On/Off switch
Technical details
Power supply: 100–240 V ~, 50/60 Hz
Power consumption: 2 W
Rechargeable battery: Li-ion battery, 600 mAh, 3.7 V
Protection type (charger): IP X7 (protected against the ingress of water
during temporary immersion)
Protection class: II /
Charging time: approx. 14 - 16 hours
(first charge)
Protection type (handset): IP X4 (protected against water splashes)
NSZB 3.7 B2
GB│IE│NI
│
3 ■
Safety information
DANGER – RISK OF ELECTRICAL SHOCK!
► To avoid damage, do not allow liquids to enter
the appliance and do not submerge it in water.
► Ensure that no foreign objects enter the appliance.
► In the event of malfunctions or obvious damage,
please contact our customer service department.
► Ensure that the power cable can never become
wet or damp during operation. Route the power
cable in such a way that it cannot become
trapped or damaged in any other way. Danger
of electric shock!
► The mains cable of this appliance cannot be
replaced. If the cable is damaged, the whole
appliance must be scrapped.
► Never touch the charger if it has fallen into
water. Remove the plug from the wall socket
first! Danger of electric shock!
Do not submerge the handset or the charger
in water or other liquids.
WARNING – RISK OF INJURY!
► Toothbrushes may be used by children and
by persons with reduced physical, sensory or
mental capabilities or lack of experience and/
or knowledge, if they are supervised or have
been told how to use the appliance safely and
are aware of the potential risks.
► Cleaning and user maintenance should not be
carried out by children, unless they are under
supervision.
► Do not allow children to play with the appliance.
CAUTION – PROPERTY DAMAGE!
► The electric toothbrush may only be recharged
with the supplied charger.
Otherwise, the appliance could be irreparably
damaged!
► Operate the appliance only with the original
accessories supplied.
NSZB 3.7 B2
■ 4 │ GB
│IE│
NI
Setting up
NOTE
► In damp rooms, especially in the vicinity of water (bath), the charger
must be set up so that it cannot accidentally fall into the water.
1) Place the charger on a clean and level surface.
Ensure that the charger cannot fall into water, such as into a bath or sink.
First use
NOTE
Before starting to use the appliance, check that it is in fault-free condition.
You must not use the appliance if it has any faults.
1) Insert the power plug into the socket.
2) Before initial use, clean the new brush heads with fresh water.
3) Open the lid and place the replacement brush heads into the brush
holders . Close the lid again.
4) Place the handset on the charger so that it slides onto the pin on the
base.
5) Allow the handset to charge for around 14–16 hours before using it for
the first time. The charge indicator on the front of the handset lights up
red during the charging process.
6) Use the handset repeatedly without charging the battery until the performance becomes noticeably weaker or the toothbrush stops working and
the charge indicator flashes red. Then recharge the battery for 14 - 16
hours. When the appliance is fully charged, the charge indicator lights
up green.
7) Charge and discharge the toothbrush completely 3 times. At that point, the
battery will have reached its full capacity.
8) You can now leave the handset on the charger after every use, so as to
always have full power available.
Fitting / removing brush heads
■ To remove the brush head , pull it upwards and off the drive shaft .
■ When fitting the brush head , ensure that the drive shaft on the handset
slides precisely into the socket on the brush head .
Push the brush head down until it completely covers the drive shaft .
NOTE
To avoid damage to the appliance, always use original brush heads.
(see section "Order replacement parts" for replacement brush heads)
► You can also use the replacement brush heads of the model Oral B
©
Sonic Complete* for this appliance.
*Oral-B is a registered trademark of Procter & Gamble.
Loading...