aesthetic for any application in any room.
NC = NEW CONSTRUCTION
From the company that invented the category, comes the BEST SOUNDING , best looking and most complete range of in-wall and in-ceiling speakers ever. Visual Performance® Series
VP10SUB NC
comes in various shapes and sizes to compliment down lights and
décor and a complete range that allows you to enjoy a consistent
VP12SUB NC
VP12SUB NC AMPLIFIER
VP10SUB NC and VP12SUB NC In-Wall subwoofers combines elegant, modern visual design with uncompromised bass performance for home theaters and multi media solutions.
The VP Series Subwoofers feature an innovative low profile driver with an ultra low distortion motor and 4" diameter voice coil. The VP12SUB NC In-Wall subwoofer incorporates a 12" woofer, while the VP10SUB NC utilizes a 10" woofer. Dual central mount spiders are used in both models to maximize the movement of the laminated carbon fiber honeycomb woofer cone.
VP Series Subwoofer enclosures are constructed from a combination of 1/2" and 1" MDF for superior isolation of bass and extruded aluminum bracing for minimal obstruction of airflow inside the enclosure. Mass damping of front and back walls of each enclosure and long strand fiberglass internal damping for standing wave dissipation is also incorporated. In addition, a floating enclosure design minimizes vibration transfer to adjoining rooms. Both enclosures fit in a standard 2 x 4 stud bay and a blank preconstruction plate is included for easy installation.
VP Series Subwoofer amplifiers feature Class D output stage, line, and speaker level high pass filtering and are designed specifically to the VP10SUB NC and VP12SUB NC drivers and enclosures. Each amplifier is capable of driving up to two woofers. The VP10SUB NC extends down to 30Hz and using the matching VP10SUB NC amplifier, is capable of producing 108dB of output at 1 meter. The VP12SUB NC extends down to 25Hz and using its matching VP12SUB NC amplifier, will produce 114dB of output at 1 meter.
Keeping in mind the different installation stages needed by the CEDIA professional, the Visual Performance Subwoofer systems are sold separately in three pieces; a woofer driver with grille, an in-wall enclosure, and the outboard amplifier or as a system that includes two woofer drivers with grilles, two enclosures, and the amplifier.
Width: | 14 1/4″ (362mm) |
---|---|
Height: | 47 1/4″ (1,200mm) |
Depth: | 3 7/16″ (87mm) |
Mounting Depth: | 3 3/8″ (86mm) |
Mounting
Bracket Width: |
16 1/4″ (410mm) |
Height
--601i
Width: | 14 1/4″ (362mm) |
---|---|
Height : | 70 7/8″ (1,800mm) |
Depth: | 3 7/16″ (87mm) |
Mounting Depth: | 3 3/8″ (86mm) |
Mounting | 16 1 / 4" / 410 marca) |
Dracker wiath: | 101/4 (4)Umm) |
SKU | 92872 | 92873 |
---|---|---|
UOM | Each | Each |
Woofer |
10" (254mm)
laminated carbon fiber cone with a rubber surround |
12" (305mm)
laminated carbon fiber cone with a rubber surround |
Frequency Response | 30Hz - 250Hz ±3dB | 25Hz - 250Hz ±3dB |
Impedance | 8 ohms nominal | 8 ohms nominal |
Requirement |
Requires Cinema SUB10-250 acoustic
enclosure, sold separately. Requires Cinema SUB10-250 amplifier, sold separately |
Requires Cinema SUB10-250 acoustic
enclosure, sold separately. Requires Cinema SUB10-250 amplifier, sold separately |
Sensitivity |
88dB SPL
(2.83V/1 meter) |
90dB SPL
(2.83V/1 meter) |
Grille | Perforated steel | Perforated steel |
Dimensions Woofer
(W x H x D) |
10 7/16" x 10 7/16" x 3 5/32"
(265mm x 265mm x 80.2mm) |
12 3/8" x 12 3/8" x 3 5/32"
(314mm x 314mm x 80.2mm) |
Dimensions Grille
(W x H x D) |
13 1/16" x 13 1/16" x 5/32"
(332mm x 332mm x 4mm) |
15" x 15" x 5/32"
(381mm x 381mm x 4mm) |
Shipping Weight | 18 lbs (8.2kg) each | 19 lbs (8.6kg) each |
SKU | 92874 | 92875 |
---|---|---|
UOM | Each | Each |
Internal Volume | .80 cubic feet (22.6 liters) of volume | 1.20 cubic feet (34.3 liters) of volume |
Material | MDF wood box with long strand fiberglass acoustic dampening material | MDF wood box with long strand fiberglass acoustic dampening material |
Compatibility | Fits the VP10SUB NC only | Fits the VP12SUB NC only |
Enclosure Dimensions
(W x H x D) |
14 1/4" x 47 1/4" x 3 7/16"
(362mm x 1200mm x 87mm) |
14 1/4" x 70 7/8" x 3 7/16"
(362mm x 1800mm x 87mm) |
Mounting Depth | 3 3/8" (86mm) | 3 3/8" (86mm) |
Mounting Bracket Width | 16 1/4" (410mm) | 16 1/4" (410mm) |
Hardware | Integrated L-bracket mounting system included |
Integrated L-bracket
mounting system included |
Shipping Weight: | 61 lbs (28kg) each | 90 lbs (41kg) each |
SKU | 92876 (120V) | 92878 (230V) | 92877 (120V) | 92879 (230V) |
---|---|---|
UOM | Each | Each |
Output Power RMS: |
230 Watts @ 8 ohms (1% THD, 32hz)
370 Watts @ 4 ohms (1% THD, 32hz) |
400 Watts @ 8 ohms (1% THD, 26hz)
660 Watts @ 4 ohms (1% THD, 26hz) |
Output Power Peak: |
260 Watts @ 8 ohms (7% THD, 32hz)
470 Watts @ 4 ohms (8% THD, 32hz) |
446 Watts @ 8 ohms (4% THD, 26hz)
776 Watts @ 4 ohms (6% THD, 26hz) |
AC Fuse: |
120v Model - 8 amp (T8A - 250V)
230v Model - 6.3 amp (T6.3A - 250V) |
120v Model - 12 amp (T12A - 250V)
230v Model - 8 amp (T8A - 250V) |
AC Power
Consumption: |
588w @ 4 ohms (sine wave, full power)
396w @ 4 ohms (music, full power) 22w idle (no signal) |
985w @ 4 ohms (music, full power)
564w @ 4 ohms (music, full power) 45w idle (no signal) |
Heat Output: |
102 BTU/HR @ 8 ohms (music, full power)
183 BTU/HR @ 4 ohms (music, full power) |
183 BTU/HR @ 8ohms (music, full power)
285 BTU/HR @ 4ohms (music, full power) |
Signal-to-Noise Ratio: | -95dB (w/ 22kHz A-wtg. Filter) | -95dB (w/ 22kHz A-wtg. Filter) |
Line Input Impedance: | 600 ohms | 600 ohms |
Line Output Impedance: | 600 ohms | 600 ohms |
Auto-On
Trigger Sensitivity: |
7.0mV LFE Line Input
3.5mV Stereo Line Input |
7.0mV LFE Line Input
3.5mV Stereo Line Input |
Low-Pass
Crossover Freq: |
(BYPASS Switch OFF): 50Hz ~ 150Hz
(variable), 12dB/octave (BYPASS Switch ON): 250Hz (fixed), 12dB/octave |
(BYPASS Switch OFF): 50Hz ~ 150Hz
(variable), 12dB/octave (BYPASS Switch ON): 250Hz (fixed), 12dB/octave |
Hi Level Out Hi-Pass Filter: | -3dB @ 150Hz, 6dB/octave | -3dB @ 150Hz, 6dB/octave |
Line Level Out Hi-Pass Filter: | -3dB @ 150Hz, 6dB/octave | -3dB @ 150Hz, 6dB/octave |
Controls: |
Variable crossover freq and output level,
Phase switch, Bypass switch |
Variable crossover freq and output level,
Phase switch, Bypass switch |
Dimensions
(WxHxD): |
16 3/4" x 3 7/8" x 13 1/2"
(425mm x 98mm x 343mm) |
16 3/4" x 3 7/8" x 13 1/2"
(425mm x 98mm x 343mm) |
RMF Dimensions
(WxHxD): |
19" x 3 7/8" x 13 1/2"
(483mm x 98mm x 343mm) |
19" x 3 7/8" x 13 1/2"
(483mm x 98mm x 343mm) |
Rack Space Requirement: | 2U, Rack Ears included | 2U, Rack Ears included |
Certifications: | ETL, CE, C-Tick, FCC | ETL, CE, C-Tick, FCC |
Shipping Weight: | 19 lbs (8.6kg) each | 19 lbs (8.6kg) each |
VP10SUB NC SYSTEM 120V (2 SUBWOOFERS, 2 ENCLOSURES & 1 AMPLIFIER)
VP12SUB NC SYSTEM 120V (2 SUBWOOFERS, 2 ENCLOSURES & 1 AMPLIFIER) (Each)
VELOCI ID NIC SVSTEM 220V (2 SUBWOOFERS, 2 ENCLOSURES & 1 AMPLIFIER) (Each)
VP12SUB NC SYSTEM 230V (2 SUBWOOFERS, 2 ENCLOSURES & 1 AMPLIFIER) (Each)
Sonance warrants to the first end-user purchaser that this Sonance-brand product ("Product"), when purchased from an authorized Sonance Dealer/Distributor, will be free from defective workmanship and materials for the life of the Product, except for the arille, which is warranted for five (5) years. Sonance will at its option and expense either repair the defect or replace the Product with a new or remanufactured Product or a reasonable equivalent.
Sonance warrants to the first end-user purchaser that this Sonance-brand product ("Product"), when purchased from an authorized Sonance Dealer/Distributor, will be free from defective workmanship and materials for the life of the Product, except for the grille, which is warranted for five (5) years. Sonance will at its option and expense either repair the defect or replace the Product with a new or remanufactured Product or a reasonable equivalent.
Please visit our website and owner's e-Manual for complete warranty and exclusion information.
Sonance, Visual Performance and Roto-Lock, are registered trademarks of Dana Innovations.
Due to continuous product improvement, all features and specifications are subject to change without notice. For the latest Sonance product specification information visit our website: www.sonance.com
SONANCE • 212 Avenida Fabricante • San Clemente, CA 92672-7531 USA (800) 582-7777 or (949) 492-7777 • FAX: (949) 361-5151 • Technical Support: (800) 582-0772 www.sonance.com