Sonance V831SSDR, V833SSDR User Manual
Sonance Virtuoso®SSDR-Series
Single-Stereo Speakers
Sonance Virtuoso® SSDR-Series Speakers
Sonance Virtuoso SSDR® speakers combine the outputs of your
amplifier’s left and right stereo channels, and play both signals
from just one speaker. Totally redesigned for 2006, these new
Virtuoso SSDR speakers incorporate advanced driver materials
and technology that give them stunning musical performance.
Virtuoso SSDR speakers are ideal for use in hallways, bathrooms, closets, or any location where a pair of stereo speakers
would be impractical. The Virtuoso SSDR’s innovative fullypivoting design delivers outstanding musical performance from
a wide variety of challenging installation locations.
Features:
• Completely redesigned for 2006 with dramatically improved
sound quality and quicker/easier installation.
• Fully-pivoting woofer assembly directs sound at listeners, for
superior sound even when placement options are limited.
• Advanced driver materials deliver extremely accurate musical
performance.
• 8” Diameter woofers deliver deep, powerful bass.
• Graphite-Reinforced ABS (GRABS) woofer baskets reduce
resonances.
• 3-Position midrange and tweeter adjustment switches (V833ss
DR).
• Exclusive new FastMount
®
tabs hold speaker in the mounting
hole during installation, allowing installer to let go of the speaker
to pick-up tools or other items.
• RotoLock
®
mounting system simplifies installation.
• Paintable aluminum grilles.
• Optional Retrofit Enclosure reduces sound spillover from rear of
speaker into adjacent spaces.
Virtuoso V833SSDR
Virtuoso V831SSDR
Virtuoso V833ssDR
6”
10
1
/
8
”
11¼”
DIMENSIONS
(all Virtuoso SSDR-Series speakers)
212 Avenida Fabricante
San Clemente, CA 92672-7531 USA
(800) 582-7777 or (949) 492-7777
FAX: (949) 361-5151
Technical Support: (800) 582-0772
www.sonance.com
®2006 Dana Innovations. Sonance,Virtuoso, Sonic Eye, RotoLock and FastMount are trademarks or registered trademarks of Dana Innovations. All Rights Reserved.
All features and specifications are subject to change without notice. For the latest Sonance product information go to www.sonance.com
04/06
Optional Accessories:
VirtuosoDRFlexBracket (part# 92247): Plastic template
to reserve a mounting hole for the speaker in new
construction. Note: Not for use with Architectural
Finish Installation Kits.
Virtuoso
DR
Coverplate (part# 92245): Covers the hole
made by the FlexBracket during construction until
the speaker is installed.
Virtuoso
DR
Retrofit Enclosure (part# 92243): Molded
enclosure that reduces sound transmission into
adjacent rooms and spaces. Can be used in both
new construction and retrofit installations.
Virtuoso
DR
Fire-Rated Back Can (part# 91908): Meets
ASTM E 119 and UL2043 criteria for commercial
installations.
SPECIFICATIONS
V833SSDR
Tweeter: Two ¾" (19mm) Silk domes, Ferrofluid cooled
Midrange: Two 3" (76mm) Carbon Fiber cones, rubber
surrounds
Woofer: 8" (203mm) Carbon Fiber cone, dual voice coil,
rubber surround, pivoting
Frequency Response: 32Hz – 20kHz ±3dB
Impedance: 6 Ohms nominal; 4 Ohms minimum
Power Handling: 5 Watts minimum; 150 Watts maximum
SPL: 91dB SPL (2.83V 1 meter)
Grille Material: Perforated Aluminum
Adjustments: Tweeter and midrange level (±3dB)
Dimensions (Dia. x D): 11¼" x 6" (286mm x 152mm)
Cutout Diameter: 10
1
/8" (257mm)
Shipping Weight: 10 lbs. (4.5kg) Each
V831SSDR
Tweeter: Two ¾" (19mm) Silk domes, Ferrofluid cooled
Midrange: Two 3" (76mm) Polypropylene cones, rubber
surrounds
Woofer: 8" (203mm) Polypropylene cone, dual voice
coil, rubber surround, pivoting
Frequency Response: 45Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 Watts minimum; 100 Watts maximum
Sensitivity: 89dB SPL (2.83V 1 meter)
Grille Material: Perforated Aluminum
Adjustments: None
Dimensions (Dia. x D): 11¼" x 6" (286mm x 152mm)
Cutout Diameter: 10
1
/
8" (257mm)
Shipping Weight: 8 lbs. (3.6kg) Each
Loading...