Sonance Sub 8-100 User Manual

Sonance Subwoofers

Cabinet Subwoofers

Specifications:

Sub 12-250

Woofer: 12" (305mm) Anodized aluminum cone,

rubber surround
Frequency Response: 22Hz - 250Hz ±3dB
Amplifier Power: 250 Watts
Inputs: Line-level and speaker-level
Outputs: High-pass filtered line-level and speaker level
Grille Material: Black cloth
Cabinet Finish: Gloss black
Adjustments: Front-accessible level, crossover, phase

and bypass
Dimensions (W x H x D): 15" x 18" x 16" (381mm x 457mm x 406mm)
Shipping Weight 70lbs. (31.5kg)

Sub 10-150

Woofer: 10" (254mm) Anodized aluminum cone,

rubber surround
Frequency Response: 28Hz - 250Hz ±3dB
Amplifier: 150 Watts
Inputs: Line-level and speaker-level
Outputs: High-pass filtered line-level and speaker-level
Grille Material: Black cloth
Cabinet Finish: Gloss black
Adjustments: Front-accessible level, crossover, phase

and bypass
Dimensions (W x H x D): 14" x 16" x 14" (355mm x 406mm x 355mm)
Shipping Weight: 60lbs. (27kg)

Sub 8-100

Woofer: 8" (203mm) Anodized aluminum cone,

rubber surround
Frequency Response: 35Hz - 250Hz ±3dB
Amplifier: 100 Watts
Inputs: Line-level and speaker-level
Outputs: High-pass filtered line-level and speaker-level
Grille Material: Black cloth
Cabinet Finish: Gloss black
Adjustments: Front-accessible level, crossover, phase

and bypass
Dimensions (W x H x D): 12" x 14" x 12" (305mm x 355mm x 305mm)
Shipping Weight: 40lbs. (18kg)

For 2006 Sonance offers three completely new
subwoofers that deliver powerful, low-distortion
bass in any room. Anodized aluminum woofer cones
combine with heavily-braced sealed enclosures to
deliver room-shaking bass, yet cabinet size is kept
to a minimum, maximizing installation options.
The front-mounted controls and recess-mounted
amplifiers allow these woofers to be tucked-away
under shelves or installed flush with walls.

Features:

• Three sizes compliment a wide variety of systems
and rooms.

• Anodized aluminum woofer cones have very low
moving mass and excellent rigidity.

• Extra long-throw voice coils allow linear excursion
for low-distortion performance up to maximum
amplifier power.

• Sealed, heavily-braced enclosures deliver tight,
well-defined bass performance.

• Exclusive ½" MDF / ½" particle board laminate
cabinet material offers superior stiffness and
resonance damping.

• Front-mounted controls allow easy access.

• Recessed amplifier and flush-mounted grille
allow installation in tight spaces.

• Auto-on operation.

©2006 Sonance. All rights reserved. Sonance is a registered trademark of Dana Innovations.

Due to continuous product improvement, all features and specifications are subject to change without notice.

For the latest Sonance product specification information visit our website:

www.sonance.com

212 Avenida Fabricante
San Clemente, CA 92672-7531 USA
[phone] or [phone]
FAX: [phone]
Technical Support: [phone]

WWW.SONANCE.COM

12/06

Sub 12-250