Sonance S6.5,ELURA BLUE LABEL SERIES,S4,S6.5IW,S8,S6.5ST Owner's Manual & Installation Manual
BLUE LABEL SERIES
S4 / S6.5 / S6.5ST / S6.5IW / S8
Owner’s Manual / Installation Guide
Congratulations and thanks for your selection of the Elura Blue Label Series speakers by Sonance®. These products
have been designed for easy installation and reliable performance. Because you’re a professional in this eld, we’ve
limited the following installation guidelines to essential facts and recommendations.
One thing to keep in mind: Elura is committed to your success. Any questions, comments or assistance you require
is available anytime by contacting us directly. Thanks for your support.
PRE-INSPECTION
Check the contents of each carton to make sure no damage has occurred during transit or handling. Let us know
immediately if anything appears to be damaged.
Contact your freight company or dealer and le a claim - all products leave our factories and distribution centers
completely clean and fully functional. Normally, we’ll replace damaged product immediately and await freight
claim results so you can get your job done. Please take photos (particularly shipping cartons) and send them along
with a description of the damage.
SELECTING SPEAKER LOCATIONS
Take your usual care when selecting speaker locations and placement. Avoid wiring, plumbing, lighting xtures
and HVAC ducting. Speaker wiring should already be in position for new construction – watch for studs and joists
when making your cut-outs.
SPEAKER INSTALLATION
We package the Blue Label Series with the grille on to prevent possible damage. You’ll nd the paint mask and
adhesive chips to attach the mask are packaged adjacent to the speakers. Position the dog ears ush with the
bae frame and hold next to your cut-out.
Connect the speaker wires (+ to + / - to -), install the speakers and connect to the amplier. For multiple speakers,
be sure to check impedance matching.
SOUND DISPERSION
Depending on room size it is best to place speakers approximately 12’ from one another. Proper spacing will
improve sound imaging. Consider the room environment and furniture placement while selecting your primary
listening area.
PRODUCT WARRANTY
Elura speaker products are guaranteed to meet or exceed the specifications included in this manual and carry with
them a lifetime limited warranty under normal conditions of use. This warranty covers free parts and labor on all
components with the obligation that Elura will repair or replace any component found defective in materials or
workmanship. This warranty does not apply to products that have been abused, incorrectly installed, modified,
disassembled and/or repaired by anyone other than Elura or our appointed repair facility. Products qualified under
this warranty must be returned to the factory or a service center designated by Elura, with all transportation and
insurance charges pre-paid.
SPEAKER SPECIFICATIONS
S4
Speaker Type: In-ceiling, Zero Bezel Woofer: 4” CarbonX Cone, Silhouette Surround
Tweeter: 1” XL Chambered Silk Dome, Pivoting Power: 5-75 watts
Impedance: 8 ohms Freq. Response: 58Hz-20KHz `
Sensitivity: 89dB
Finish Dimensions: Ø6.44” (163.6mm), 3.73” (94.8mm) Cutout Dimension: Ø5.70” (144.8mm)
S6.5
Speaker Type: In-ceiling, Zero Bezel Woofer: 6.5” CarbonX Cone, Silhouette Surround
Tweeter: 1” XL Chambered Silk Dome, Pivoting Power: 5-130 watts
Impedance: 8 ohms Freq. Response: 45Hz-20KHz
Sensitivity: 91dB EQ Adjustments: Contour Switch with -3, 0, +3
Finish Dimensions: Ø9.27” (235mm), 4.46” (113mm) Cutout Dimension: Ø8.25” (210mm)
S6.5ST
Speaker Type: In-ceiling Stereo, Zero Bezel Woofer: 6.5” CarbonX Cone, Silhouette Surround
Tweeter: Dual 1” XL Chambered Silk Dome Power: 5-130 watts
Impedance: 8 ohms Freq. Response: 45Hz-20KHz
Sensitivity: 91dB EQ Adjustments: Contour Switch with -3, 0, +3
Finish Dimensions: Ø9.27” (235mm), 4.46” (113mm) Cutout Dimension: Ø8.25” (210mm)
S6.5IW
Speaker Type: In-wall, Zero Bezel Woofer: 6.5” CarbonX Cone, Silhouette Surround
Tweeter: 1” XL Chambered Silk Dome, Pivoting Power: 5-130 watts
Impedance: 8 ohms Freq. Response: 45Hz-20KHz
Sensitivity: 91dB EQ Adjustments: Contour Switch with -3, 0, +3
Finish Dimensions: 7.87” (200mm), 11.76“ (299mm), 3.43” (87mm)
Cutout Dimension: 6.89” (175mm), 10.83” (275mm)
S8
Speaker Type: In-ceiling, Zero Bezel Woofer: 8” CarbonX Cone, Silhouette Surround
Tweeter: 1” XL Chambered Silk Dome, Pivoting Power: 5-140 watts
Impedance: 8 ohms Freq. Response: 40Hz-20KHz
Sensitivity: 91dB EQ Adjustments: Contour Switch with -3, 0, +3
Finish Dimensions: Ø11.17” (284mm), 4.78” (122mm) Cutout Dimension: Ø10.08” (256mm)
www.elura.audio
Loading...