Sonance S623LCR User Manual
Sonance Symphony®Series
S623LCR
Home Theater Speaker
Specifications:
Sonance Symphony S623LCR
Tweeter: 1" (25mm) Silk dome, Ferrofluid-
cooled
Woofer: Two 6½" (165mm) Carbon fiber
cones, rubber surrounds
Frequency Response: 43Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum;
135 watts maximum
Sensitivity: 92dB SPL (2.83V/1 meter)
Grille Material: Perforated Aluminum
Adjustments: ±3dB Tweeter Level
Dimensions (W x H x D): 16" x 8
1
/
8" x 3
7
/
8"
(407mm x 206mm x 98mm)
Cutout Dimensions (W x H): 14½" x 6¾" (368mm x 171mm)
Shipping Weight: 7 lbs (3.2kg) each
Features:
• Traditional dual woofer/single tweeter home
theater speaker configuration.
• Visually and sonically matches other Sonance
Symphony
®
series speaker models.
• Dual carbon fiber cone woofers produce deep,
powerful bass and provide high-output lowdistortion music and film dialog.
• Fits standard 16” on-center stud construction.
• Exclusive new FastMount
®
tabs hold the speaker in
the mounting hole during installation, allowing the
installer to let go of the speaker to pick-up tools or
other items.
• The Rotolock
®
mounting system makes installation
quick and easy.
• A three position tweeter adjustment switch lets
you balance the speaker’s high-frequency energy
to better complement the room’s setup and
acoustics.
• Removable IR plug accommodates a Sonance
OptiLinQ
®
SMR1 or SMR1P IR receiver, allowing
convenient front-of-the-room aiming for system IR
remote controls.
• Paintable perforated aluminum grille with built-in
scrim cloth.
S
ONANCE
S
YMPHONY
®
S623
LCR
S
PEAKER
The new Sonance Symphony®S623LCR home theater
speaker is a visual and sonic match for our best-selling
Sonance Symphony speaker line.
Incorporating the same drivers as the Symphony S623
T
and S623TR but in a traditional dual woofer/single
tweeter home theater speaker format, the S623
LCR makes
an ideal center-channel counterpart for any Symphony
series left and right channel speaker pair in small or
medium-sized home theater systems. And by using the
S623
LCR in all three front-channel positions (left, center
and right) and other Symphony series speakers as
surround channels, an exceptionally high-performance
home theater system can be assembled.
Installation is quick and easy thanks to the RotoLock
®
mounting system. Exclusive FastMount®tabs hold the
speaker in the mounting hole during installation, allowing
the installer to let go of it to pick-up tools or other items.
And the S623
LCR is designed to fit between standard 16”
on-center studs (the standard stud spacing in the USA).
The new Sonance S623
LCR is the perfect center-channel
match for any Sonance Symphony series speaker pair,
giving dealers and installers all the tools they need to
create exceptional home theater systems in a variety of
configurations.
212 Avenida Fabricante
San Clemente, CA 92672-7531 USA
(800) 582-7777 or (949) 492-7777
FAX: (949) 361-5151
Technical Support: (800) 582-0772
WWW.SONANCE.COM
®2007 Sonance, All Rights Reserved.
Sonance, Sonance Symphony, FastMount and RotoLock are trademarks or registered trademarks of Dana Innovations.
Due to continuous product improvement, all features and specifications are subject to change without notice.
For the latest Sonance product information, go to:
www.sonance.com
10/07
16”
(407mm)
14½”
(368mm)
6¾”
(171mm)
3
7
/
8
”
(98mm)
8
1
/
8
”
(206mm)
Dimensions:
Sonance Symphony®Series
S623LCR Home Theater Speaker
Limited Lifetime Warranty:
Sonance warrants to the original retail purchaser only that this
Sonance product will be free from defects in materials and workmanship, provided the product was purchased from a Sonance
Authorized Dealer. For full warranty information, please see the
Instruction Manual.
Loading...