Sonance R1CAB Specification Sheet

SURROUND SOUND

REFERENCE CABINET SPEAKER

Overview

Created for AV Designers building systems that require the best surround sound available with a look that ﬁts the space aesthetically, The Sonance Reference cabinet speaker provides a solution for bulit-in cabinetry with a truly incredible sound, engineered to give you an amazing cinema experience, The Sonance R1CAB can be used with Reference in-wall speakers, in-ceiling speakers and in-wall subwoofers.

Key Features

R1CAB

Aesthetics

• Piano black ﬁnish cabinet with black speaker cloth grille

Performance

• Woofer boundary compensation switch for improved intigration with subwoofers

• Phase switch for easy wiring conﬁguration

• Built to bring out the best sound in movies, gaming and streaming

• All new driver technology

• High excursion carbon ﬁber woofer

Installation

• Easy to install

• Perfect for installations in built-in furniture or entertainment units

• Mix and match with Reference in-wall speakers, in-ceiling speakers and in-wall subwoofers

R1CAB with Grille

Dimensions

Width: 7 1/2” (190mm) Height: 22” (559mm) Depth: 9 1/16” (230mm)

Speciﬁcations

R1CAB

Width Depth

Height

Model:

SKU:

Unit of Measure:

Tweeter:

Midrange:

Woofer:

Frequency Response:

Impedance:

Power Handling:

Sensitivity:

Grille Material:

Shipping Weight:

LIMITED LIFETIME WARRANTY

Sonance warrants to the ﬁrst end-user purchaser that this Sonance-brand product (“Product”), when purchased from an authorized Sonance Dealer/Distributor, will be free from defective workmanship and materials for the life of the Product, except for the grille, which is warranted for ﬁve (5) years. Sonance will, at its option and expense, either repair the defect or replace the Product with a new or remanufactured Product or a reasonable equivalent. Please visit our website and owner’s e-Manual for complete warranty and exclusion information.

R1CAB 93339 Each 1” (25mm) Ceramic dome, Ferroﬂuid-cooled in an acoustic back chamber 5 1/4” (133mm) Carbon ﬁber/Rohacell laminated cone with a rubber surround 5 1/4” (133mm) Carbon ﬁber/Rohacell laminated cone with a rubber surround 70Hz - 30kHz +/-3dB 8 Ohms nominal; 6 Ohms minimum 5 Watts minimum; 150 Watts maximum 90dB SPL (2.83V/1 meter) Black cloth 25 lbs (11.4kg)

Due to continuous product improvement, all features and speciﬁcations are subject to change without notice. For the latest Sonance product speciﬁcation information visit our website: www.sonance.com

SONANCE • 991 Calle Amanecer • San Clemente, CA 92673 USA (949) 492-7777 • FAX: (949) 361-5151 • Technical Support: (949) 492-7777

www.sonance.com

11.07.17