Sonance PATIO SERIES 4.1 SYSTEM Specification Sheet
PATIO SERIES
OUTDOOR AUDIO SYSTEM
4 SATELLITES | 4 GROUND STAKES | 1 SUBWOOFER | 1 SR 2-125 AMPLIFIER*
AESTHETICS
· Non-corroding, high heat ABS sealed enclosure
PERFORMANCE
· 8 Ohms impedance matched system
· 8” dual voice coil subwoofer
· Perfectly even coverage for comfortable listening in areas
up to 1,000 sq. ft. (~100m
2
) (depending on property layout)
Patio Series 4.1 System w/ Amplifier
SKU 93430
Patio Series 4.1 System (no amp)
SKU 93429
INSTALLATION
· Compatible with Sonance 19” ground stakes
· Complete 4.1 System configuration on a single
two-channel amplifier
· Expandable for up to 8.2 configuration
* System available with or without amplifier
SONANCE PATIO SERIES
DIMENSIONS
PATIO SAT
Diameter: 4.50” (115mm)
Height: 15.17” (385mm)
Depth: 7.20” (184mm)
Depth
Height
PATIO SUB
Canopy Width: 12.40” (315mm)
Enclosure Width: 9.84” (250mm)
Canopy Height: 6.20” (157.5mm)
Enclosure Height: 15.20” (386.2mm)
Overall Height: 21.41” (543.7mm)
Canopy Width
Canopy
Height
Diameter
Overall
Height
Enclosure
Height
Enclosure Width
SPECIFICATIONS
PATIO SATELLITE SPEAKER
Woofer:
Frequency Response:
Crossover Frequency:
Impedance:
System Impedance:
Power Handling:
Sensitivity:
Enclosure Material:
Mounting Threads:
Dimensions (L x Dia.):
Shipping Weight:
Power Output (RMS):
Dimensions w/ feet (WxHxD):
Rack Space Requirement:
LIMITED THREE (3) YEAR WARRANTY
Sonance warrants to the first end-user purchaser that this Sonance-brand product (“Product”), when purchased from an authorized Sonance Dealer/
Distributor, will be free from defective workmanship and materials for the period stated above. Sonance will, at its option and expense, either repair the
defect or replace the Product with a new or remanufactured Product or a reasonable equivalent. Please visit our website and owner’s e-Manual for
complete warranty and exclusion information.
3.5” (98mm) Anodized aluminum
cone & Santoprene™ surround
40Hz - 20kHz +/-3dB (System)
125Hz
16 Ohms nominal
8 Ohms nominal
50 watts minimum; 150 watts maximum
85dB 2.83V / 1 meter
High-heat ABS sealed enclosure,
Non-corroding
1/2” NPS (National Pipe Standard)
6.75” x 4.5” (171.35mm x 115mm)
68 lbs (31kg) System
SR 2-125 AMPLIFIER
125 watts (2-channels driven at 8 Ohms)
8.625” x 2.125” x 16.8125” (219mm x 54mm x 427mm)
1U-Half Rack width
PATIO SUBWOOFER
8” (203mm) dual voice coil, polypropylene
& Santoprene surround
40Hz - 20kHz +/-3dB (System)
100Hz
8 Ohms nominal per voice coil
8 Ohms nominal
150 Watts
89dB Sensitivity @ 2.83V / 1 meter
High-heat ABS sealed enclosure,
Non-corroding
-
21.4” x 12.4” (544mm x 315mm)
68 lbs (31kg) System
©2020 Sonance. All rights reserved. Sonance is a registered trademarks of Dana Innovations. Due to continuous product improvement, all features and
specifications are subject to change without notice. For the latest Sonance product specification information visit our website: www.sonance.com
SONANCE • 991 Calle Amanecer • San Clemente, CA 92673 USA
PHONE: (949) 492-7777 • FAX: (949) 361-5151 • Technical Support: (949) 492-7777 • www.sonance.com 02.17.2020
Loading...