Sonance Navigator Harbor,Navigator Network Supplementary Manual

Adjusting a Source

To change the radio station or go to the next track on a CD, etc., follow the
directions given below. Your system installer will be able to provide you with
the specific responses that your audio equipment will give to your commands.

Press and Release:

When an illuminated button is pressed and immediately released, the system will send a
command to the selected source equipment. This command varies with the source equip­ment but is generally "next station" for a tuner, "next track" for a CD player, "next song" for
a cassette tape. Your installer can tell you how your system is programmed, or you can just
try it out.

Press and Hold:

If you press and hold an illuminated button until all the buttons illuminate, an alternate
command will be executed. This might be "next disc" for a CD, "switch sides" for a cas­sette, or a favorite preset station for a tuner. Your system installer can tell you how this is
programmed.

For information on system options and accessories, visit our website or contact us at:

Sonance • 212 Avenida Fabricante • San Clemente, CA • 92672-7531

Tech Support: [phone] • E-mail: [e-mail]

www.sonance.com

33-2068 7.00

The Sound of Sonance

™

Sonance Navigator Network

Quick Reference Guide

The Sonance Navigator Network's
functions intuitively make it fun and
easy to use.

All the controls you need are
located right here. You will find
at least one of these keypads in
every zone of the Audio System.

{

{

SOURCE

VOLUME

Source

A source is your DVD player, CD player, tuner, tape player or TV, etc.
Pressing and releasing a button that is not illuminated selects a source.

Selecting a Source in One Zone (Room):

Press and release a button. The button will immediately illuminate, although it may take
several seconds while tapes and discs are loading before you hear music. The system
programs an initial volume setting, so please wait until you hear music before making
volume adjustments.

Selecting a Source in Multiple Zones:

Press and hold a button until all the buttons illuminate in order to play a selected source
in all zones designated as part of the keypad (zone) group.

Ask your installer for information regarding your customized zone groups.

Volume

Adjust: Adjust the volume in the room where the keypad is located.

Off: Press and release the OFF button to turn off a zone. Press and hold the OFF button

until all buttons illuminate to shut off the entire system.

The Sound of Sonance

™