Page 1
INVISIBLE SERIES
Page 2
INVISIBLE SERIES
Invisible Speakers are the pinnacle of the Sonance “Designed to Disappear”
strategy. After a multi-year development process, the all-new Motion Flex
Invisible Series line incorporates new breakthroughs in installation and audio
quality, and rmly entrenches Sonance as the unrivaled leader in discreet
performance audio.
© 2020 APURE HOLDING LLC | STUDIO F·A·PORSCHE | APURE-SYSTEM.COM
32
Page 3
INTRODUCING MOTION FLEX TECHNOLOGY
Technology that is out of sight, but not out of mind.
Inert
Fiber-Reinforced
Diaphragm
Acoustically
Isolating Bafe
Air Flex
Woofer
Wave Flex
Drive Unit
CDX
Crossover
MOTION FLEX DEFINED
The new Sonance Invisible Series, featuring Motion Flex Technology, offers a suite of
advancements in invisible speaker engineering that together delivers unparalleled acoustic
performance and redenes what is possible from an invisible speaker.
WAVE FLEX DRIVE UNIT
This high-bandwidth midrange and high-frequency transducer drive unit propagates sound via a bending-wave
principle, delivering velvety-smooth mids and crystal-clear highs while enabling a lower crossover point to
facilitate high delity listening.
AIR FLEX WOOFER
By coupling a glass-ber woofer to our acoustically inert diaphragm via a pocket of air, the active diaphragm area
moves like a piston. The result is robust and powerful bass that dees expectations and delivers unsurpassed
sonic quality.
ACOUSTICALLY ISOLATED BAFFLE
The diaphragm is split into two active areas that are completely isolated. This prevents the bending motion of the
Wave Flex Drive Unit from interfering with the pistonic motion of the Air Flex Woofer, enabling ultra-low
distortion and a level of sonic transparency not previously possible in invisible speakers.
CONSTANT DIRECTIVITY CROSSOVER (CDX)
Sonance’s proprietary CDX crossover provides uniquely smooth off-axis frequency response, resulting in greater
delity and coverage for each speaker. In the all new Invisible lineup, the CDX crossover allows for almost 180° of
horizontal and vertical dispersion.
4 5
Page 4
INSTALLATION
Sonance has revolutionized the invisible speaker category beyond just performance and design with innovative
construction-friendly and reliable installation technology.
INSTALLATION ADVANTAGES.
• Sonance DISC System to standardize thickness of topping compound on the job site
with precision to achieve consistent performance from every speaker and subwoofer
SONANCE DEPTH IDENTIFICATION SENSING CALIBRATION (DISC) SYSTEM
The Sonance DISC System works by using a high-accuracy depth gauge and embedded locator discs to
measure the thickness of a nish applied over the surface of a Sonance Invisible Speaker. This allows for
a consistent nish and performance within specications every time.
• Includes models compatible with 12” on-center stud and joist spacing
• Every model in the line can be installed as nish-up-to or nish-over
• Optional installation accessories: pre-construction brackets, space savers, and
noise-isolating enclosure
12” (305mm) on-center
16” (406mm) on-center
6
Embedded
DISCS
Depth
Gauge
7
Page 5
THE FUTURE OF INVISIBLE SOUND
New Sonance Invisible Series speakers and subwoofers, featuring
Motion Flex Technology, provide revolutionary audio for any application,
transforming any space into a magical experience without
compromise to performance or design.
8
9
Page 6
INVISIBLE SERIES SPEAKERS
New Sonance Invisible Series speakers offer enhancements that cannot be seen but can denitely be heard. Much attention and
detail went into every aspect of performance and installation, to deliver crisp detailed audio playback that rivals, and in many cases,
surpasses traditional architectural speaker performance.
IS6
Best Used In Smaller, compact spaces like narrow hallways
Wave Flex Drive Unit 20in² (127cm²) bending wave diaphragm | 1.75in (44mm) voice coil
Air Flex Woofer 98in²²(633cm²) air pulse diaphragm | 6.5in (165mm) carbon ber woofer
Frequency Response (+/- 3dB) 50Hz–30kHz
Nominal Impedance (Ohms) 6
Power Handling (RMS) 100W
Sensitivity (2.83V/1m) 84dB
Dispersion 170º hemispherical up to 10kHz
Dimensions (WxHxD) 16.10” x 16.10” x 3.15” (409mm x 409mm x 80mm)
Mounting Depth 2.67” (68mm)
Optional Accessories Preconstruction bracket, space saver, noise-isolating enclosure
IS8
Best Used In Large residential spaces such as entryways, living rooms, or multipurpose rooms
Wave Flex Drive Unit 29in² (188cm²) bending wave diaphragm | 1.75in (44mm) voice coil
Air Flex Woofer 191in² (1234cm²) air pulse diaphragm | 8in (203mm) carbon ber woofer
Frequency Response (+/- 3dB) 40Hz–30kHz
Nominal Impedance (Ohms) 6
Power Handling (RMS) 160W
Sensitivity (2.83V/1m) 86dB
Dispersion 170º hemispherical up to 10kHz
Dimensions (WxHxD) 16.10” x 24.13” x 3.15” (409mm x 613mm x 80mm)
Mounting Depth 2.67” (68mm)
Optional Accessories Preconstruction bracket, space saver, noise-isolating enclosure
© 2020 APURE HOLDING LLC | STUDIO F·A·PORSCHE | APURE-SYSTEM.COM
10
11
Page 7
INVISIBLE SERIES SPEAKERS
IS10
Best Used In Large residential spaces such as entryways, living rooms, or
multipurpose rooms
Wave Flex Drive Unit 29in² (188cm²) bending wave diaphragm | 1.75in (44mm) voice coil
Air Flex Woofer 244in²²(1573cm²) air pulse diaphragm | 10in (254mm) carbon ber woofer
Frequency Response (+/- 3dB) 35Hz–30kHz
Nominal Impedance (Ohms) 6
Power Handling (RMS) 200W
Sensitivity (2.83V/1m) 87dB
Dispersion 170º hemispherical up to 10kHz
Dimensions (WxHxD) 16.10” x 28.66” x 3.15” (409mm x 728mm x 80mm)
Mounting Depth 2.67” (68mm)
Optional Accessories Preconstruction bracket, space saver, noise-isolating enclosure
12
13
Page 8
INVISIBLE SUBWOOFERS
The concept of installing subwoofers into the wall is not new. But being able to successfully install and nish a high-performance
subwoofer into a surface with zero visual impact is unique. Sonance Invisible Series subwoofers hold nothing back, delivering
powerful bass with two performance levels to choose from that have an impactful presence in the room with no visual evidence
where design is of ultimate importance.
IS10W
Best Paired With Pair with IS6 for extended bass in distributed audio or home theater systems.
Add to visible speaker systems such as Sonance VP or Architectural Series
for totally invisible bass augmentation.
Air Flex Woofer 244in²²(1573cm²) air pulse diaphragm | 10in (254mm) carbon ber woofer
Frequency Response (+/- 3dB) 35Hz–250Hz
Nominal Impedance (Ohms) 6
Power Handling (RMS) 200W
Sensitivity (2.83V/1m) 87dB
Dispersion 180º hemispherical
Dimensions (WxHxD) 16.10” x 24.13” x 3.15” (409mm x 613mm x 80mm)
Mounting Depth 2.67” (68mm)
Optional Accessories Preconstruction bracket, space saver, noise-isolating enclosure
IS15W
Best Paired With Pair with IS8 or IS10 for extended bass in distributed audio or
home theater systems.
Air Flex Woofer 592in²²(3819cm²) air pulse diaphragm | 15in (381mm) carbon ber woofer
Frequency Response (+/- 3dB) 30Hz–250Hz
Nominal Impedance (Ohms) 6
Power Handling (RMS) 250W
Sensitivity (2.83V/1m) 93dB
Dispersion 180º hemispherical
Dimensions (WxHxD) 32.20” x 32.20” x 3.86” (818mm x 818mm x 98mm)
Mounting Depth 3.15” (86mm)
Optional Accessories Preconstruction bracket and space saver
14
15
Page 9
COMMERCIAL APPLICATIONS
Sonance Invisible Series Speakers are perfect for luxury retail boutiques, hotels, and other high-end spaces that require
best-in-class performance with zero visual intrusion.
IS8T
Best Used In Commercial venues such as luxury retail stores, design-centric hotels,
residential high rise apartments, and any premium space where audio
should be hidden to preserve the atmosphere.
Wave Flex Drive Unit 29in²²(188cm²) bending wave diaphragm | 1.75in (44mm) voice coil
Air Flex Woofer 191in²²(1234cm²) air pulse diaphragm | 8in (203mm) carbon ber woofer
Frequency Response (+/- 3dB) 40Hz–30kHz
Nominal Impedance (Ohms) 6
Power Handling (RMS) 160W
Sensitivity (2.83V/1m) 86dB
Dispersion 170º hemispherical up to 10kHz
Transformer 60W w/ Laminated Core Technology
Transformer Taps Primary taps (70V): 7.5W, 15W, 30W, 60W
Primary taps (100V): 15W, 30W, 60W
5 Ohm bypass
Dimensions (WxHxD) 16.10” x 24.13” x 3.86” (409mm x 613mm x 98mm)
Mounting Depth 3.15” (86mm)
Enclosure Integrated UL-listed enclosure
Optional Accessories Preconstruction bracket, space saver
SONANCE LAMINATED CORE TRANSFORMER TECHNOLOGY
16
The Sonance Laminated Core Transformer is built into the IS8T to deliver distortion-free,
wide-bandwidth audio for uncompromising performance in 70V/100V commercial applications.
17
Page 10
©2020 Sonance. All rights reserved. Sonance, James Loudspeaker and IPORT are registered trademarks.
Due to continuous product improvement, all features and specications are subject to change without notice.
For the latest Sonance product specication information visit our website: www.sonance.com
Sonance • 991 Calle Amanecer • San Clemente, CA 92673 USA
09.11.2020
Loading...