Somfy AXORN 50, AXORN 70, AXORN 90 User Manual
Programmation tips
Assembly the lintel attachement lug.
Add 50 mm above the highest point on the door travel.
Centred the lug relative to the center of the door.
Assembly
®
AXORN 50 AXORN 70 AXORN 90
The rail is delivered with a chain tension that has been pre-set at the factory
Don’t touch this tension.
Check that the rails join correctly. Note the marking (center)
on the assembly bars.
50mm
36mm
Press and hold the remote control button the press the adjustement push-
button briefly to memorise the remote control buttons.
➔It is possible to memorise either one or two keys per remote control unit :
one to operate the garage door and the other for the light.
When the remote control is memorised, don’t move the garage door.
Move the trolley towards the handle by this method :
The adjustment indicator is on when you put on the AXORN
Lock the handle
Press the adjustment push button
Press and hold the speed push-but-
ton ( change of direction with
each push)
Press the adjustment push-button
again to finish the adjustment process.
the adjustment indicator flashes.
The mobile trolley moves
towards the doors and automatically clips onto the handle.
the door is in the closed position
Adjustment push-button
Speed push-button
1 sec
1 sec
1 sec
aintaining pressure
1
1
2
3
4
1
2
3
4
1
maintaining pressure
Adjustment
1
Memorising remote control buttons
2
Loading...