How it Works
Solwise
Loading...
PLV-200AV-PEWN
User Manual
39 pgs2.04 Mb0

Solwise PLV-200AV-PEWN User Manual

Download
Solwise PLV-200AV-PEWN_MK2
HomePlug AV 200 Mbps
With WiFi
V1.0
Page 2 of 39
Legal Notice
2013 © All rights reserved. Version 1.0
No part of this document may be reproduced, republished, or retransmitted in any form or by any means whatsoever, whether electronically or mechanically, including, but not limited to, by way of photocopying, recording, information recording, or through retrieval systems without the express written permission. We reserve the right to revise this document at any time without the obligation to notify any person and/or entity. All other company or product names mentioned are used for identification purposes only and may be trademarks of their respective owners.
LIMITATION OF LIABILITY AND DAMAGES
THE PRODUCT AND THE SOFTWARES WITHIN ARE PROVIDED "AS IS," BASIS. THE MANUFACTURER
AND MANUFACTURER’S RESELLERS (COLLECTIVELY REFERRED TO AS “THE SELLERS”) DISCLAIM
ALL WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTIES ARISING FROM COURSE OF DEALING, COURSE OF PERFORMANCE, OR USAGE OF TRADE. IN NO EVENT WILL THE SELLERS BE LIABLE FOR DAMAGES OR LOSS, INCLUDING BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL WILLFUL, PUNITIVE, INCIDENTAL, EXEMPLARY, OR CONSEQUENTIAL, DAMAGES, DAMAGES FOR LOSS OF BUSINESS PROFITS, OR DAMAGES FOR LOSS OF BUSINESS OF ANY CUSTOMER OR ANY THIRD PARTY ARISING OUT OF THE USE OR THE INABILITY TO USE THE PRODUCT OR THE SOFTWARES, INCLUDING BUT NOT LIMITED TO THOSE RESULTING FROM DEFECTS IN THE PRODUCT OR SOFTWARE OR DOCUMENTATION, OR LOSS OR INACCURACY OF DATA OF ANY KIND, WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY, EVEN IF THE PARTIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE PRODUCT OR ITS SOFTWARE IS ASSUMED BY CUSTOMER. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO THE PARTIES. IN NO EVENT WILL THE
SELLERS’ TOTAL CUMULATIVE LIABILITY OF EACH AND EVERY KIND IN RELATION TO THE
PRODUCT OR ITS SOFTWARE EXCEED THE AMOUNT PAID BY CUSTOMER FOR THE PRODUCT.
Page 3 of 39
Contents
About the Product ................................................................... 5
How Does It Work? ....................................................................................................... 5
Direct Connection ....................................................................................................... 6
Package Contents ....................................................................................................... 7
Device Design .............................................................................................................. 8
Pairing the Device ..................................................................................................... 10
How to Use Simple Connect .................................................................................... 10
Resetting the Private Network Name .................................................................. 11
Creating a Secured HomePlug AV Network ..................................................... 12
Joining an Existing Secured HomePlug AV Network ...................................... 18
Getting Started ....................................................................... 23
Plan Your Network ...................................................................................................... 24
Local Network ............................................................................................................. 24
Gaming Network ........................................................................................................ 24
Entertainment Network ............................................................................................. 24
Media Network ........................................................................................................... 25
Setup the HomePlug AVs .......................................................................................... 26
For Twin Pack .............................................................................................................. 26
For Single Pack ........................................................................................................... 26
Using the Web User Interface ............................................... 28
Requirements .............................................................................................................. 28
How to access the Web UI? ..................................................................................... 29
To Configure Wireless Settings .................................................................................. 30
To do Firmware Upgrade .......................................................................................... 31
Device Restart ............................................................................................................ 32
Device Reset ............................................................................................................... 33
To change Private Network Name.......................................................................... 33
Local Private Network Name ............................................................................... 35
Remote Private Network Name ........................................................................... 35
Simulate Simple Connect Button ......................................................................... 36
Devices ........................................................................................................................ 37
Page 4 of 39
Appendix ............................................................................... 38
FCC Statement ....................................................................................................... 38
Page 5 of 39
About the Product
HomePlug AV is ready to use out of the box and does not require the installation of driver
software to work. It can be connected to computers, routers, gaming consoles, hubs, IPTV
set-top boxes, and other Ethernet devices regardless of operating system.
How Does It Work?
HomePlug AV utilizes the existing electrical wiring in the house as a path to create a secured
network of computers and Ethernet devices. With a maximum data rate of up to 500 Mbps,
HomePlug AV can reliably handle high requirement applications such as broadband
Internet, high definition video streaming, and Voice over IP.
HomePlug AV converts digital signals to a complex analog signal that traverses along the
electrical wires. When receiving the analog signal, HomePlug AV converts the analog signal
back to digital. To make the signal secured, a 128-bit AES encryption is applied.
A HomePlug AV device can only communicate with other HomePlug AV devices that use
the same Private Network Name. The Private Network Name can be easily changed in two
ways; (1) is through the Homeplug AV Web User Interface. It can be changed manually using
the HomePlug AV Web User Interface on a computer with a Windows operating system.
When you use the Web Interface, you have to manually type the Private Network Name for
the device. (2) Is through the Simple Connect button. The Simple Connect button
automatically creates an encrypted Private Network Name. It can also be used to reset the
Private Network Name or to add a device into an existing HomePlug AV network.
Note: HomePlug AV devices are effective when used in pairs. The Twin packs are already
configured to use a common Private Network Name unique for that pair and are ready to
use without involving any complex configurations. The HomePlug AV from a Single Pack on
the other hand, uses a random Private Network Name. You still need to change its Private
Network Name to allow it to communicate with an existing HomePlug AV network.
Page 6 of 39
When a HomePlug AV communicates with another device, the Powerline Activity LED
color will indicate the status of the connection rate it provides: Red means below 30 Mbps;
Amber means 30 to 80 Mbps; and Green means more than 80 Mbps.
Direct Connection
For best performance, connect the HomePlug AV directly to a wall outlet. Avoid connecting
it to a power strip where other electrical devices are connected. Other devices create
electrical noise or interference that may affect the overall performance of HomePlug AV.
Page 7 of 39
Package Contents
The package contains the following items:
1 HomePlug AV for Single Pack or 2 HomePlug AVs for Twin Pack
(Note: Homeplug AV is available in GBR, DEU and USA Plugs)
1 Ethernet cable for Single Pack or 2 Ethernet cables for Twin Pack Resource CD that contains the Easy Start Guide and the User Manual. Easy Start Guide
Page 8 of 39
Device Design
Page 9 of 39
Label
Status
Description/ Function
A
WPS Button / Wireless
LED
Off
No power.
On
When this button is pressed for 2 seconds it
will enable WPS function.
When this button is pressed for more than 5
seconds it will reset the device.
When the wireless LED is blinking it means it is
transmitting and receiving traffic.
B
Power LED
Off
No power.
On
When Simple Connect is pressed for 10
seconds, this LED will turn OFF and turn ON to
confirm the Private Network Name reset.
After Simple Connect is pressed for 2
seconds, this LED will blink to confirm the
button press.
C
Powerline Activity
Off
Device is not connected to a HomePlug AV network.
On
When Simple Connect is pressed for 10
seconds, this LED will turn OFF to confirm the
Private Network Name reset.
This LED is steady in color when the device is
part of a HomePlug AV network.
The LED colors represents the connection
rate within the HomePlug AV network
whether it is good (red), better (amber), or
best (green).
D
Ethernet Activity
Off
An Ethernet device is not connected.
On
This LED is steady when an Ethernet device is
connected.
When Simple Connect is pressed for 10
seconds, this LED will turn OFF and turn ON to
confirm the Private Network Name reset.
(Ethernet is connected)
The LED flashes to indicate Ethernet activity.
E
Ethernet Port
Accepts either cross or straight Ethernet cable.
F
Simple Connect Button
Press to create or join a HomePlug AV network.
When Simple Connect is pressed for 10 seconds, it will
randomize the Private Network Name.
Then Press for 2 seconds to pair the device.
Page 10 of 39
Pairing the Device
Your HomePlug AV devices by default are preconfigured to have a common Private
Network Name. Setting up your HomePlugAV network is as easy as 1,2 and 3.
1. It is advisable that you plug in your HomePlugAV devices side by side to easily
observe the LED behaviors of each Homeplug AV. Wait until the Power and PL-ACT
LED turns ON to confirm that the connection has been established.
2. In ROOM A plug in your HomePlugAV into the wall socket then connect it to your
Modem/Router’s Ethernet LAN port using an Ethernet cable.
3. In ROOM B plug in your HomePlugAV into the wall socket then connect it to your
computer’s Ethernet Port using an Ethernet cable. Your HomePlugAV is now ready to
use.
How to Use Simple Connect
Simple Connect provides a more convenient way of creating your HomePlug AV network
without the need to open the HomePlug AV Web User Interface from a computer. The
button has three main functions which include:
Resetting the Private Network Name Creating a Secured HomePlug AV Network Joining an existing Secured HomePlug AV Network
Page 11 of 39
Resetting the Private Network Name
Simple Connect allows you to reset the HomePlug AV’s Private Network Name to a random
key. When a HomePlug AV is reset to a random key, it will not be able to communicate with
any other device.
Note: Resetting the Private Network Name is different from resetting the device to its factory
default settings. If you intend to reset the device to its factory default settings, press WPS
button on the device for more than 5 seconds.
Page 12 of 39
To reset the Private Network Name using Simple Connect:
Creating a Secured HomePlug AV Network
To create a HomePlug AV network, you need at least two HomePlug AV devices using
random Private Network Names. When you press Simple Connect for 10-13 seconds on both
devices, a common Private Network Name will be automatically generated to enable them
to communicate with each other.
Note: New HomePlug AV can already communicate with each other once out of the box
and plugged. However, if you intend to create a new Private Network Name using Simple
Connect for both devices, you need to reset their Private Network Names to a random key
before proceeding.To create a Secured HomePlug AV network using Simple Connect:
Step 1
Press Simple Connect button for 10
seconds. Power LED and Ethernet LED will
turn off on turn on (Ethernet is
connected). The Powerline Activity LED
will switch OFF on both units.
Step 2
On the second adapter (PLV-200AV-
PEWN_MK2), Press the Simple Connect button
for 2 seconds and do it on the first adapter to
pair the devices. The Power LED will blink to
indicate that the button Is pressed.
Homeplug X
Homeplug Y
Page 13 of 39
Step 1
Plug your HomePlug AVs side by side where you can easily observe the LED behavior.
Upon connection, the Ethernet LEDs will blink simultaneously and then the Power LED and
Powerline Activity LED lights on steadily.
Press the Simple Connect button of HomePlug AV X for 10 seconds. Powerline Activity LED
will turn OFF. Power LED will Turn off and ON indicating that the Private Network Name has
been randomized.
Homeplug X
Homeplug Y
Page 14 of 39
Step 2
Press Simple Connect for two seconds on HomePlug Y. After you release the button, the
Power LED will blink. If the Power LED did not blink, press Simple Connect again for two
seconds.
Note: Do not press Simple Connect for more than two seconds.
Page 15 of 39
Step 3
Press Simple Connect for two seconds on HomePlug X. After you release the button, the
Power LED will blink. If the Power LED did not blink, press Simple Connect again for two
seconds.
Pairing between two devices are only given two minutes upon pressing the simple connect
button for two seconds. After pressing Simple Connect on HomePlug Y, make sure to press
Simple Connect on HomePlug X within two minutes to assure a successful connection,
otherwise repeat steps 2 and 3 until the LEDs of both devices switch off and on twice,
indicating that they are paired with one another.
Note: Do not press Simple Connect for more than two seconds
Homeplug X
Homeplug Y
Page 16 of 39
Step 4
To confirm if the connection was established, check the LEDs. The Power LEDs and the
Powerline Activity LEDs on both HomePlugs are ON.
When the Powerline Activity LED on either HomePlug X or HomePlug Y is off, this means the
pairing is not successful. In this case, you have to redo the entire process again (simply
repeat steps 1 to 3).
Step 5
Unplug the HomePlug AVs and then connect them to your Ethernet devices using the
Ethernet cables from the product package. After connecting the Ethernet cable, plug the
HomePlugs directly to a wall outlet.
An Ethernet-enabled device can be a router, computer, hub, gaming console, IP phone,
network printer, or IP TV set-top box.
Homeplug X
Homeplug Y
Homeplug X
Homeplug Y
Page 17 of 39
Note: HomePlug AVs work best when connected directly to a wall socket. It is suggested to
avoid plugging a Homeplug AV to a power strip or power extension. Other electrical devices
in the power strip produce electrical noise that may affect the overall performance of the
HomePlug.
Page 18 of 39
Joining an Existing Secured HomePlug AV Network
To enable a new device to join an existing network, Simple Connect will copy the Private
Network Name of the existing network to the new HomePlug AV. You only have to pair the
new Homeplug AV device to any of the devices within the existing Homeplug AV Network by
pressing the Simple connect. If you pressed Simple Connect from multiple HomePlug AVs,
only the signal from the first two devices will be processed.
To join an existing Secured HomePlug AV network using Simple Connect:
Step 1
Plug HomePlug AV Z beside one of your existing HomePlug AV device. It is important to assure
that you can easily observe the LED behavior of the Homeplugs.
Upon connection, HomePlug Z’s LEDs will blink simultaneously and then the Power LED lights
ON steadily. Ethernet LED will be ON if there is an ethernet link.
Page 19 of 39
Step 2
Press Simple Connect for 10 seconds from HomePlug AV Z. After you release the button,
Power LED and Ethernet LED (if Ethernet is connected) will turn off and turn on.
Note: If the Power and Ethernet LED did not turn off and on, press Simple Connect again
for 5-8 seconds.
Step 3
Press Simple Connect Button for two seconds on the existing HomePlug AV device. After you
release the button, the Power LED will continuously blink. If the Power LED did not blink,
press Simple Connect again for two seconds.
Make sure to press Simple Connect Button again on the HomePlug AV Z within two minutes
after you press Simple Connect from the existing network.
Page 20 of 39
Step 4
To confirm if the connection was established, check the LEDs. The Power LEDs and the
Powerline Activity LEDs on all HomePlugs are on.
If the Powerline Activity LED on HomePlug Z is off, this means the pairing was unsuccessful.
You have to repeat steps 1 to 3 again until all LEDS in all Homeplug AV devices are on .
Page 21 of 39
Step 5
Unplug HomePlug Z and then connect it to your Ethernet device using the Ethernet cables
from the product package. After connecting the Ethernet cable, plug HomePlug Z directly to
a wall outlet. An Ethernet-enabled device can be a router, computer, hub, gaming console,
IP phone, network printer, or IP TV set-top box.
Note: HomePlug AVs work best when connected directly to a wall socket. Avoid plugging it
to a power strip or power extension. The other electrical devices in the power strip create
noise that may affect the performance of the HomePlug.
Page 22 of 39
Determining Connection Rate
Each LED color of the Powerline Activity LED represents a connection rating. The
connection rating can only be calculated when the device is part of an existing network. The
exact connection rate value can also be viewed using the HomePlug AV Web User
Interface.
e
Good (Red)
Better
(Amber)
Best (Green)
Connection rate is
less than 30 Mbps
Connection rate is
between 30 to 80 Mbps
Connection rate is
more than 80 Mbps
Page 23 of 39
Getting Started
Setting up the device is easy. The flowchart below provides an outline of the steps you need
to complete the installation. There are brief descriptions beside each step to help you along.
Detailed instructions are provided in the subsequent pages.
Setup the HomePlug AVs
Plan your Network
Ready to Use
(Optional)
Open and Launch the Homeplug
AV Web User Interface
Use an Ethernet cable to connect HomePlug AV to your computer or Ethernet device.
Open Homeplug AV Web User Interface and apply manual configuration changes and monitor device activity.
Page 24 of 39
Plan Your Network
Here are ideas on how you can plan your HomePlug AV network.
Local Network
Share ultra fast Internet connection with any computer wherever it is in the house.
Gaming Network
Connect your gaming console to the Internet and compete with other online
players.
Entertainment Network
Experience IP TV streaming into your home entertainment system.
Page 25 of 39
Media Network
Realize your high tech lifestyle by converging your IP devices into a single network.
Page 26 of 39
Setup the HomePlug AVs
For Twin Pack
HomePlug AVs from a Twin Pack are preconfigured to have a common
Private Network Name unique for that pair. All you need to do is connect the
HomePlug AVs to an Ethernet device and then plug it to a wall socket.
To setup a pair of HomePlug AVs:
1. Plug one end of the Ethernet cable to your Ethernet device and then
connect the other end to HomePlug AV.
2. Connect the HomePlug AV to a wall socket.
3. Plug one end of the Ethernet cable to your other Ethernet device and
then connect the other end to HomePlug AV.
4. Connect the HomePlug AV to a wall socket.
For Single Pack
A HomePlug AV from a single pack uses a random Private Network Name
that prevents it from communicating with other HomePlug AVs. To add it into
an existing network, you need to use either the Simple Connect button or the
HomePlug AV Web User Interface to change the random Private Network
Name to the Private Network Name being used by the existing HomePlug AV
network.
To add a HomePlug AV to an existing network:
1. Plug one end of the Ethernet cable to your Ethernet device and then
connect the other end to HomePlug AV.
2. Connect the HomePlug AV to a wall socket.
3. Add the new HomePlug AV by using either Simple Connect or the
Homeplug AV Web User Interface. To use Simple Connect, please refer
Page 27 of 39
to Joining an Existing HomePlug AV Network. To use the Homeplug AV
Web User Interface please refer to Private Network Name.
Page 28 of 39
Using the Web User Interface
Web User Interface will allow you to configure HomePlug AV with WiFi. It is
mainly used for Wireless Configuration, Changing the Private Network Name,
detecting other HomePlug AV’s in the network, and measuring the
throughput of devices. Installation is straightforward and the user interface is
easy to use.
Note: To use the Web User Interface, you need a computer using a Windows
or MAC operating system. The Web interface works with various web browsers
such as Internet Explorer, Firefox, Safari, and Google Chrome.
Requirements
To ensure the smooth run of the Web User Interface, it is suggested that your
computer must be able to meet the following requirements:
Windows XP (32 and 64 bit), Vista (32 and 64 bit), Windows 8 (32 and 64
bit)
300 MHz Processor 128 Mb of RAM .NET Framework Windows Installer 3.1 for Windows XP (32 and 64 bit) Network Interface Card 128 Mb of free hard disk space
Page 29 of 39
How to access the Web UI?
1. Plug in your Homeplug AV Device (PLV-200AV-PEWN_MK2) to the wall socket.
2. Ensure that your HomePlug AV Device (PLV-200AV-PEWN_MK2) Port 1 is connected to
the router’s Ethernet Port.
3. Ensure that your HomePlug AV Device (PLV-200AV-PEWN_MK2) Port 2 is connected to
the Ethernet port of your computer.
4. Open the Web Browser and type in the URL, http://10.0.10.254
5. Enter ‘admin’ as Username and ‘admin’ as Password. Then click OK.
6. You will now be taken to the Web UI page.
Page 30 of 39
To Configure Wireless Settings
1. Go to the Wireless Tab. Click Settings
2. Under Settings, you can configure the following: a. Wireless Enable. You may enable or disable Wireless network visibility in PLV-200AV-
PEWN_MK2.
b. Change the SSID Name. By changing this, you are changing the name of your
network.
c. Define the Wireless Channel, or limit the number of devices connected to your
network.
d. Modify the mode, or change the wireless standard implemented in your Homeplug
AV.
e. Channel Width. Allows you to modify the transfer rate; it is advisable to leave this in
Auto.
3. Under the Security Setting,
Users can change the Security type (Open, WEP or WPA), Users can enable or disable the WPS function (By default WPS is disabled).
Page 31 of 39
To do Firmware Upgrade
Use Firmware Upgrade to upgrade the firmware of HomePlug AV. After upgrading the
firmware, HomePlug AV will still retain the same Private Network Name and MAC address
settings. Before you proceed with the upgrade, you need to have the Firmware File
(FWUpgrade). You can download upgrade files from the product’s Web site.
1. Go to System Tab, Device Management, Upgrade Firmware.
2. Click Browse, Select the Firmware File (fwupgrade file), then Click Apply.
Firmware Upgrade will take about 3 minutes to complete.
Page 32 of 39
Device Restart
1. Go to System Tab.
2. Click Device Management
3. Click Restart.
Page 33 of 39
Device Reset
1. Go to System Tab.
2. Click Device Management
3. Click Restore Defaults
Note: You can also perform a reset to the factory default when you press the
WPS button on the device more than 5 seconds.
To change Private Network Name
Private Network Name provides the function to manually change the Private
Network Name of local and remote HomePlug AVs. A Private Network Name
is a string of 8 to 64 characters enables HomePlug AV devices to
communicate with each other.
If you intend to create multiple networks, you can assign different Private
Network Names among your devices. You have to, however, make sure that
at least two HomePlug AVs have a similar Private Network Name. A
Page 34 of 39
HomePlug AV that uses a unique or random Private Network Name will not
be able to communicate with other devices under a different Private
Network name.
Note: In case you cannot connect into the network after changing the Private Network
Name, please power cycle the device. To power cycle, disconnect and then reconnect
HomePlug AV from the power outlet.
Page 35 of 39
Local Private Network Name
Local Private Network Name refers to the Private Network Name of the
HomePlug AV that is directly connected to the computer where you use the
Web User Interface.
To change the local Private Network Name:
1. Open the Web User Interface.
2. Click HomePlug Tab, then Choose Security.
3. Type the new Private Network Name. This field is case sensitive. It
accepts 8 to 64 alphanumeric characters including punctuation marks
but no spaces.
4. Click Apply. When the process is complete, the message Settings
Applied appears.
Remote Private Network Name
Without leaving your computer, you can change the Private Network Name
of remote HomePlug AV devices, provided they are using the same Private
Network Name as your local HomePlug AV. You cannot change the Private
Network Name of remote devices that is not currently networked with your
local HomePlug AV.
Note: When changing the Private Network Name of remote devices, you will need the
Device ID that appears on the label pasted on the device. It will be more helpful if you list
down the Device ID of all your HomePlug AVs to enable you to remotely change their
settings using the HomePlug AV Web User Interface.
To change the Private Network Name of a remote HomePlug AV:
1. Open the Web User Interface, Under HomePlug Tab, Security,
2. Change Remote Private Network Name.
Page 36 of 39
3. Type the new Private Network Name. This field is case sensitive. It
accepts 8 to 64 alphanumeric characters including punctuation marks
but no spaces.
4. Select Change Private Network Name of remote device.
5. Type the Device ID of the remote device. The Device ID can be found
on the label sticker on each respective device.
6. Click Apply. When the process is complete, the message Settings
Applied appears.
After changing the Private Network Name of the remote HomePlug AV,
it will no longer be able to communicate with your local HomePlug AV,
unless you use a similar Private Network Name for your local HomePlug
AV.
Simulate Simple Connect Button
Simulate Simple Connect Button allows you to apply functionalities without
manually pressing the Simple Connect button on a HomePlug AV device.
However, this only works on local devices.
Simple Connect Select to search and pair with another device, or
search and join an existing HomePlug AV network.
NMK Randomize Select to reset to a random Private Network Name. A
HomePlug AV using a random Private Network Name will be
disconnected from the HomePlug network and will not be able to
communicate with other devices until it forms a new network or joins an
existing network.
Page 37 of 39
Devices
Devices displays information about remote HomePlug AV’s detected in the
network. Only HomePlug AVs using the same Private Network Name as the
local HomePlug AV will appear in the Remote Devices list.
Devices displays the following information:
Remote Device MAC address Displays the Remote HomePlug AV MAC
Address.
Connection Rate (Tx/Rx) Displays the Transmit and Receive connection
rates.
Page 38 of 39
Appendix
FCC Statement
This equipment has been tested and complies with the specifications for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used according to
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which is found by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment or devices Connect the equipment to an outlet other than the receiver’s Consult a dealer or an experienced radio/TV technician for assistance
European Regulations
The product has been designed, tested and manufactured according to the European
R&TTE directive 1999/5/EC.
Page 39 of 39
Safety Warnings
For your safety, be sure to read and follow all warning notices and instructions.
Do not open the device. Opening or removing the device cover can expose you to
dangerous high voltage points or other risks. Only qualified service personnel can
service the device. Please contact your vendor for further information.
Do not use your device during a thunderstorm. There may be a risk of electric shock
brought about by lightning.
Do not expose your device to dust or corrosive liquids. Do not use this product near water sources. Make sure to connect the cables to the correct ports. Do not obstruct the ventilation slots on the device.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use