A;$; Maintenance Manual
Catalogue
1 A;$; introduction........................................................................1
1.1 The technical specifications:......................................................2
1.2 Product description ....................................................................3
1.2.1 Appearance ......................................................................3
1.2.2 IO ports ............................................................................5
2 Machine Assembly ...............................................................................6
2.1 Disassembling machine .............................................................6
2.2 Dismantle the HDD ...................................................................9
2.3 Install the MSR ........................................................................10
2.4 Install the Customer Display....................................................11
2.4.1 Mounting the VFD Customer Display ...........................11
2.4.2 Mounting the 2nd Display..............................................11
2.5 Wall Mounting .........................................................................12
2.6 Installation of Mini PCI-E Equipment.....................................13
3 Main Component Technical Specifications ........................................14
3.1 Motherboard ............................................................................14
3.2 LCD .........................................................................................21
3.3 Touch Screen............................................................................22
3.4 Power Adapter .........................................................................23
3.5 3G module ...............................................................................24
3.6 MSR.........................................................................................26
3.7 WIFI.........................................................................................27
3.8 Internal Cables .........................................................................28
3.8.1 LVDS cable....................................................................28
3.8.2 SATA cable.....................................................................28
3.8.3 Inverter cable .................................................................28
3.8.4 MSR cable......................................................................28
3.8.5 Serial port cable .............................................................29
3.8.6 Touch screen USB cable ................................................29
3.8.7 Interface board FPC cable..............................................29
3.8.8 Switch cable ...................................................................29
3.8.9 Indicator cable................................................................30
4 System Setting ....................................................................................31
4.1 System diagram .......................................................................31
4.2 The BIOS Descriptions and Settings .......................................32
4.3 Software Installation and Settings ...........................................36
4.3.1 Chipset driver.................................................................36
4.3.2 VGA driver.....................................................................36
4.3.3 LAN driver.....................................................................36
4.3.4 Audio driver ...................................................................36
4.3.5 Touch screen driver........................................................36
4.3.6 WIFI driver ....................................................................36
4.3.7 Setup the touch screen....................................................36
4.3.8 Setup the MSR ...............................................................38
1
1 A;$; introduction
A;$;, developed by 6ROX[ with ten years experience of commercial
POS systems, is an innovation of traditional POS and KIOSK design. It
contains the full functions which a mainstream product has and can
satisfy the demands of commercial and related industry, for example,
cashing function in retail business, catering industry and self-service. It
has high configuration, multi-functional, low power consumption and
high reliability characteristics. It is widely used in shopping center,
department stores, supermarkets, shops, convenience stores, hotels,
restaurants and commercial enterprises, also used in places need
self-service, like telecommunications, banks, postal services, airport and
governments.
A;$; is an innovational solution of POS (point of sale) and
Kiosks. It uses upper cable management design into system to keep
simply cabling; Ship with the latest Intel Atom processor of high
performance for low power consumption; The touch screen and hard
disk are easy to remove for quick maintenance; Aluminum housing
guarantees efficient heat elimination and steady performance;
Streamline design offers artistic appearance; Modular design can expand
peripheral applications easily; Waterproof structure design for spill
proof; Fan free structure for harsh environment.
2
1.1 The technical specifications:
Model AX AX
CPU D525 1.8GHz D425 1.8GHz
Chipset Intel NM10, with max TDP 2.1W
Memory 4GB DDR3 2GB DDR3
Graphic
Interface
Integrate Intel GMA 3150 graphic core，
support DX9.0c
1*LVDS, 1*VGA
Storage 2.5'' HD, SATAII; SSD optional
LCD 15'' TFT 1024*768 resolution
Touch Screen 5 wires resistive
Audio
Realtek ALC662 5.1 Channel HD Audio
Codec
Line-in/Line-out (onboard header)
Power DC 12V/5A
USB 4*USB, 1*USB/+12V
RS232
6*RS232
(COM3 1pin&9pin 12V or
5V, set by BIOS)
Others
1*LPT
1*KB/MS
1*VGA
1*Drawer
2* Audio Jack
Ethernet
Realtek 8111DL PCI-E
Gigabyte Ethernet Controller
1*10/100/1000M
Port
OS
Windows2000,XP,
XPE,Win7,WEPOS,
POS Ready 2009
Linux
Dimensions(W)*(D)*(H)(mm) 370 * 247 *325 max
Customer display(Optional）
2*20 VFD or LCD
MSR(Optional) 3 tracks
WiFi(Optional) IEEE802.11/n
3G Module(Optional) WCDMA or CDMA2000
3
1.2 Product description
1.2.1 Appearance
Front view
NO. DESCRIPTION
1
15-inch TFT LCD and Touch screen
2
Magnet Stripe Reader（Optional）
3
Power LED and HDD LED
4
Rear view
NO.
DESCRIPTION
1
Cable Cover
2
HDD Cover
3
Hinge Cover
4
Base
5
The hole for cables
6
Power Switch
7 Speaker（Optional）
5
1.2.2 IO ports
NO.
DESCRIPTION MARK
1 AC adapter jack
2 PS2 KB
3 PS2 MS
4 Parallel port (LPT1)
5 VGA port
6 USB 1&2&3&4
7 Power USB 1
12V
8 Power USB 2 (Optional)
12V
9 RJ-45 LAN port
10 Microphone
11 Line-out
12 +12V Output jack
OUT 12V
13 COM1 port
COM1
14 COM2 port
COM2
15 COM3 port
COM3
16
COM4 port（with 12V）
COM4
17 Cash Drawer Port 1
CD1
18
Cash Drawer Port 2 （Optional）
CD2
19
Wi-Fi Antennae（Optional）
NOTE：The default setting of customer display port is
COM4.The 1 or 9 pin of COM3 can set 12V or 5V by BIOS.
6
2 Machine Assembly
2.1 Disassembling machine
Step 1, Remove the cable cover
Step 2; Open the hard disk cover, uninstall screws, pull out hard disk.
7
Step 3, Unload eight screws which fixed the shell.
Step 4; Open two buckles on the right side, then dismantling the front
shell and the touch screen
8
9
2.2 Dismantle the HDD
1、Dismantle the
HDD cover, and
find the HDD
bracket.
2 、 Remove the
screw of the
HDD bracket.
3、 Pull out the
HDD bracket.
10
2.3 Install the MSR
1、Put the MSR
into the slot and
move down to
fix.
2、Fix the MSR
with 2 M3*8
supplied screws.
3、Connect the
data wire of
MSR to the port
under the HDD
bracket. Then
cover it.
11
2.4 Install the Customer Display
2.4.1 Mounting the VFD Customer Display
1、Fix the display
with 4 M4*8.5
supplied screws.
2、Connect the
customer display
to customer
display port
COM4 on the
machine.
2.4.2 Mounting the 2nd Display
1、Fix the display
with 4 M4*8.5
supplied screws.
2、Connect the
2nd LCD display
to the VGA port
and +12V output
jack separately.
3、When set up
the touch screen
on the 2nd LCD
display, connect
the control line
to the USB port.
12
2.5 Wall Mounting
1、Fix the holder
on the rear of the
machine with 4
M4*8.5 screws.
2、Mounting the
bracket on the
wall or other
place with 4
screws. Our
bracket meet the
standard VESA.
The specification
is 100 * 100
（mm）.
3、Put the holder
into bracket，and
fix them with 2
M3*4 screws.
13
2.6 Installation of Mini PCI-E Equipment
Step1, move the equipment into the Mini PCI-E socket.
Step2, Use screws column fix equipment.
14
3 Main Component Technical Specifications
3.1 Motherboard
The motherboard AX1 AX2 use is SV1-D5216 and SV1-D4216.
The component No. of SV1-D5216 is 12110328
The component No. of SV1-D4216 is 12110329
Model SV1-D5216 SV1-D4216
CPU
Intel Atom D525
1.8GHz BGA CPU
With IMC,GPU and IIO
integrated
Intel Atom D425
1.8GHz BGA CPU
With IMC,GPU and IIO
integrated
Chipset Intel NM10,with max TDP 2.1W
Graphic
Interface
Integrate Intel GMA 3150 graphic core, Support
DX9.0c
1*LVDS,1*VGA
Memory
Support DDR3 800/667MHz
2*SO-DIMM slot, Maximum voltage of 4 GB
Storage
Intel Serial ATA2(3 Https)controller
2*Serial ATA ports
Ethernet
Realtek 8111DL PCI-E Gigabyte Ethernet
Controller
Support 10/100/1000 Mbps with RJ45
Audio
Realtek ALC662 5.1 Channel HD Audio Codec
Support Line-in/Line-out Ports(onboard header)
Expand
Slot
1*Mini PCI-E
Other
Port
6*COM(1 DB9,5 internal)
8*USB2.0(4 on panel,4 internal)
1*PS/2 keyboard and mouse ports(internal)
1*Microphone/Audio Output(internal)
1*CPU fan socket
1*System fan socket
1*LPT
Power
Supply
DC12V
Factor Mini ITX
15
16
The mother board pins definition
[1] PS/2 Keyboard and Mouse Header（6*1 Pin 2.00 mm）
[2] Single Channel LVDS Interface (1.25 mm)
[3] Control J20.1 ~ J20.4 (3*1Pin 2.00 mm)
[4] LVDS Backlight Control Header（5*1 Pin 2.00 mm）
[5] Control JP4.4 (3*1 Pin 2.00mm)
[6] CPU Fan (2.00 mm)
17
[7] System Fan (2.00 mm)
[8] Amplifier Header（5*2 Pin 2.54 mm）
[9] Front Panel Header（5*2 Pin 2.54 mm）
[10] SATA Power Supply Connector (2.54 mm)
[11] SATA Power Supply Connector (2.00 mm)
[12] CMOS Control Jumper (3*1Pin 2.54 mm)
[13] Serial Port 2 Header（5*2 Pin 2.0 mm）
18
[14] Serial Port 3 Header（5*2 Pin 2.0 mm）
[15] Serial Port 4 Header（5*2 Pin 2.0 mm）
[16] Serial Port 5 Header（5*2 Pin 2.0 mm）
[17] Serial Port 6 Header（TTL，4*1 Pin 2.0 mm）
[18] Serial Port 6 Header（RS232，4*1 Pin 2.0 mm）
[19] USB Header（5*2 Pin 2.54 mm）
19
[20] GPIO Header（6*2 Pin 2.00 mm）
[21] Audio Header（5*2 Pin 2.54 mm）
[22]SIM Header (1*5 Pin 2.00 mm)
[23]FPC_USB Extended Connector（20Pin）
20
[24]VGA Header（2*8 Pin 2.00 mm）
[25]LPC Debug Header（1*9 Pin 2.00 mm）
21
3.2 LCD
The LCD of AX1 AX2 is TMS150XG1-10TB.
The component No. of the LCD is 12111940.
Display area
304.128（W）x228.096（H）mm
Display diagonal
size
15 inches(38CM)
Driver a-Si TFT Active matrix way
Color number 16777216(6bit+FRC)
Pixel
1024（H）*768(V)
Bitmap
0.099（W）*0.297（H）mm
Size
326.5（L）x253.5（W）x11.3（H）mm
Weight 1000g
Contrast 600:1
Perspective 160°/160°
Color regions
60%
Response time 8ms
Brightness
250 cd/㎡
Interface 1 LVDS port
VCC 3.3V
Consumption 10.1W
22
3.3 Touch Screen
AX1 AX2 uses 5-wire resistive touch screen.
The component No. of the touch screen is 12111943.
Basic specifications
Mechanical properties:
structure：Top：ITO film; Bottom：ITO glass; thickness (2.2mmm)
Qualify way: FFC
Operating mode: Touching pen or fingers
≦Operating pressure: 50g
Size: 15 inches
Electrical characteristics:
Operating voltage: 5V（DC）
Loop impedance: 20~500 Ω
≦Linear: Standard linear error 1.5%
≧Insulation resistance: 20 MΩ/25V (DC)
Optical properties:
Pervi ≧ous: 80±2%，measurement in the 550 nm wavelength
Atomization degrees: Antiglare Finish：(9.5±2)%
durable：
Surface hardness：≧ 3H
life：Over 35 million
23
3.4 Power Adapter
The Power adapter AX1 AX2 uses is KPA-060F.
The component No. of the adapter is 12111208.
Name Power adapter
Model KPA-060F
Input voltage 100~240Vac
Input frequency 50~60Hz
Efficiency When the input voltage is between 115 and
240Vac，the minimum efficiency is 85%.
Maximum input
current
115Vac/5A load,≤ 1.7A ;
230Vac/5A load,≤ 0.85A
Output voltage
Normal
Voltage
Limit
+12.0V 11.4 to 12.6
Output current
Output
Voltage
Minimum(A) Maximum(A)
12.0V 0 5
Output power 60W
Over-voltage
protection
When the output voltage is over 16Vdc, the
over-voltage protection will happen.
Security
specifications
24
3.5 3G module
The 3G module of AX1 AX2 uses is Mini PCI-E interface. Users can
access the Internet through wireless way.
The module support HSDPA&HSUPA, also WCDMA (UMTS) and
GSM/GPRS/EDGE. Software support data, voice and text messaging
function, support the 850MHz 1900MHz and 2100MHz of WCDMA,
and also support 850MHz, 900MHz, 1800MHz&1900MHz of
GSM/GPRS/EDGE.
Mobile Technology System:
Technology system Technical standard Support or not
CDMA IS-95
CDMA CDMA2000 1X
WCDMA 3GPP-R99 YES
TD-SCDMA
GSM YES
GPRS CLASS12,CS1-4 YES
EDGE CLASS12,CS1-4,MCS1-9 YES
Working Frequency:
Working frequency(MHz) Note
Requirements
or not
UL1920~1980,DL2110~2170
WCDMA BANDⅠ
YES
UL1850~1910,DL1930~1990
WCDMA
BANDⅡ/GSM 1900
YES
UL824~849,DL869~894
WCDMA BAND
Ⅴ/GSM 850
YES
UL880~915,DL925~960 GSM 900 YES
UL1710~1785,DL1805~1880 GSM 1800 YES
25
Appearance:
Project AD3812V2 Note
Size 50.95×30×4.4mm
Weight 11g
PID 0×FFEB
VID 0×19D2
Shows
42 Pin, Support LED
display driver
Interface
PCI Express Mini Card
interface
52 Pin
Structure:
26
3.6 MSR
The MSR AX1 AX2 uses is M90U.
The component No. of the MSR is 12112212.
3 tracks data can be read, and the data Via HID-USB and RS232C, you
can select the interface according your application software.
The Serial data communication default parameter is: 9600 8 N 1.
Card standard ISO 7811/12
Power 5V(DC)±5%
Size（L*W*H）
90*22*24mm
Current ≤50mA
Head function Track's width 1.5mm
Charge speed 10-120 cm/sec
Communication interface
RS232、USB
Head life ≥500,000
Error rate ≤0.5%
Insulation resistance >50MΩ
Operating location indoor
27
3.7 WIFI
The WIFI of AX1 AX2 is Mini PCI-E interface.
The WIFI can meet IEEE802.11n wireless network international
standards. It can communicate with any WIFI device compatible with
IEEE802.11n and is compatile with the standard of IEEE802.11b and
IEEE802.11g downward. The wireless local area network transmission
speed can be up to 600 Mbps highest in theory. Super wireless rate and
broader wireless coverage can let you experience the outstanding super
wireless Internet speed, completely free of dense network lines bound
trouble. It provide 64/128/152-bit WEP data encryption and a new
generation of WPA global dynamic of the encryption algorithm security
mechanism, let you enjoy convenient and quick, high-speed safety,
relaxed happy network resources.
Standards Supported：
(1)IEEE 802.11b/g/n compatible WLAN
(2)IEEE 802.11e QoS Enhancement (WMM)
(3)IEEE 802.11h TPC, Spectrum Measurement
(4)802.11i (WPA, WPA2). Open, shared key and pair-wise key
authentication services
(5)Cisco Compatible Extensions (CCX) for WLAN devices
PHY Features：
(1) IEEE 802.11n OFDM
(2) One transmit and one receive path (1T1R)
(3) 20MHz and 40MHz bandwidth transmission
(4) Short Guard Interval (400ns)
(5) DSSS with DBPSK and DQPSK, CCK modulation with long and
short preamble
(6) OFDM with BPSK, QPSK, 16QAM, and 64QAM modulation.
Convolution Coding Rate: 1/2, 2/3, 3/4, and 5/6
(7) Maximum data rate 54Mbps in 802.11g and 150Mbps in 802.11n
(8) Switch diversity for DSSS/CCK
(9) Hardware antenna diversity
(10) Selectable receiver FIR filters
(11) Programmable scaling in transmitter and receiver to trade
quantization noise against increased probability of clipping
(12) Fast receiver Automatic Gain Control (AGC)
(13) On-chip ADC and DAC
28
3.8 Internal Cables
3.8.1 LVDS cable
Component No.: 12113028
3.8.2 SATA cable
Component No.: 12113025
3.8.3 Inverter cable
Component No.: 12113029
3.8.4 MSR cable
Component No.: 12113027
29
3.8.5 Serial port cable
Component No.: 12113031
3.8.6 Touch screen USB cable
Component No.: 12113026
3.8.7 Interface board FPC cable
Component No.: 12115314
3.8.8 Switch cable
Component No.: 12113023
30
3.8.9 Indicator cable
Component No.: 12113030
31
4 System Setting
4.1 System diagram
MOTHER
BOARD
CPU
SATA
Touch Screen
Controller
USB
I/O Interface
Board
Powered USB
2.5” HDD
LCD Panel
AC Adapter
LVDS
Inverter
5 wire resistive
touch panel
Magnetic
Stripe Reader
Cash Drawer
+12V
RS232
KB/MS
LPT
4*COM
4*USB
VGA
AUDIO
USB
802.1 n
Antenna
Mini PCI-E
DDR3
Memory
3G MSR
Interface
Interfaces
32
4.2 The BIOS Descriptions and Settings
The BIOS of AX1 AX2 is Phoenix. Users can enter the BIOS by press
Del or F2. In this window, users can see eight options: Main, Advanced,
Intel, Security, HW Monitor, Power, Boot and Exit.
1. Main
In this option, users can see the main information of the machine,
including date, time, hard disk and memory.
2. Advanced
In this option, users can do some more advanced settings. Generally
speaking, we keep default settings.
33
3. Intel
In this option, users can do some settings about the Intel CPU, such as
Video, LCD, and I/O.
4. HW Monitor
In this option, users can see the voltage and the CPU temperature of the
mother board also can see the speed of the system fan if you install it.
34
5. Power
In this option, users can do some settings about the power, such as
power off delay 4 second; also can set the voltage of COM3 to 12V or
5V.
35
6. Boot
In this option, users can choose the boot from DVD, U disk or hard disk,
especially when install the system.
7. Exit
In this option, users can save the changes, load setup default.
36
4.3 Software Installation and Settings
4.3.1 Chipset driver
The chipset driver is in the folder of E:\DRIVERS\Chipset.
4.3.2 VGA driver
The VGA driver is in the folder of E:\DRIVERS\Vga.
4.3.3 LAN driver
The LAN driver is in the folder of E:\DRIVERS\Lan.
4.3.4 Audio driver
The Audio driver is in the folder of E:\DRIVERS\Audio.
4.3.5 Touch screen driver
The Touch screen driver is in the folder of E:\DRIVERS\TouchScreen.
4.3.6 WIFI driver
The WIFI driver is in the folder of E:\DRIVERS\Wlan.
4.3.7 Setup the touch screen
The touch screen must be calibrated before first use.
1、After successful installation of diver, the following icons will appear
on your desktop.
2、Click on the “eGalaxTouch”, the system will enter the following
window for calibration.
37
3、Click the “Tools” button, then click the “Linearization” button.
4、A new window will pop-up to guide the user to calibrate. User should
click the red symbol in the calibration window and keeping until it
fully into blue. Repeat the previous calibration action until finish all the
symbols. Click ‘OK’ to exit.
5、The set-up of touch screen is finished. The touch screen can be put in
using now.
6、To make more accurate positioning, you can set the “Linearization
Style ” which in the “setting” to be 25 points and click “OK”, then
operate it according to the Step 3.
38
4.3.8 Setup the MSR
The MSR of AX1 AX2 supports the modes of USB and RS232. The
MSRDEMO.exe can be found in the folder of E:\TOOLS\ENU\MSR.
1、 Open the program and select connection motherboard interface.
“USB_HID” means connecting the USB port, “COM Port” means
connecting the COM Port. The MSR of AX1 AX2 connect with
both USB and COM ports, and the default COM port is COM6.
Then click “Connect”.
2、The following interface is used to set up the MSR. The user can select
from COM or USB port reading of the data in “Read Card From Port
Of”; “Track1,2,3” means selecting the rail of reading card; “Enter”
means choosing whether to add line breaks after reading data or not;
“Save” means saving the settings; “Load” means loading the lasted
settings; “Set Default” means restore to factory defaults; then click “Test
MSR” to test the settings.
39
2、 Under the test interface, first choose USB port or COM port of
reading data, the default COM port is COM6, then click “Test
MSR” to begin testing.
Loading...