Samba Storm
Evaporative Air Cooler
S.O. Ltd
SO2000ST
Operating Instructions
Corn Alley and American Road
P.O. Box 232
St John‟s, Antigua, W.I.
Tel/fax; (268) 462 1261
Tel/Fax (268) 560 2665
www.s-o-ltd.com
The company reserves the right to change the product design and the specification
without prior notice.
Fault
Reasons
Remedy/Solutions
1.No Power
light
1 .No power.
2.Main PCB fault.
3. Fuse blown.
4. Control panel
faulty.
1. Check power
supply.
2. Change main
board
3. Change the fuse.
4. Change the panel.
2.The unit
runs
erratically.
1Power
fluctuations.
2.Possible
electrical
interference
3. Main PCB fault.
4. Check mode
unit is operating in
1. Check power
supply.
2. Move unit to
different location.
3. Change the main
PCB.
4. Check mode
switch position.
3. Display
normal. Low or
no air flow.
1. Fan has
stopped.
2. Pad or dust
screen blocked.
3. Fan is
damaged.
4. Main PCB
faulty.
1. .Check fan speed
switch. Check fan
cowling for
interference.
2. Clean/ change pad
or dust screen.
3. Change the fan.
4. Change main
PCB.
4. The unit
does not
work
1. Master control
board faulty.
2. Control panel
faulty.
1. Change the
master control board.
2. Change the panel.
5. Unusual
noises.
1. Debris inside
fan housing.
2. Fan loose.
3 .Motor fault.
1. Remove dust
screen and pad.
Remove items from
inside housing
2 .Check and tighten
fan.
3. Change the motor.
Preface 2
Basic principle of operation 2
Package Contents 2
Parts description 2
Control/Display panel and remote functions 3-5
Ope ration 5
Functions 5-6
Anion feature 6
Safety warnings 7
Cleaning 8
Specifications 9
Troubleshooting 10
Note: These instructions are for reference purposes only. If any
additional technical assistance is required, please contact S.O. Ltd or your
nearest S.O. Ltd distributor.
Content
Troubleshooting
10
Loading...