Thank you for purchasing Solpro Gemini™.
Please read this user manual carefully and
follow all instructions thoroughly before using
this product.
USER MANUAL
NOTICE: For best results, charge full before use.
This product has been designed and manufactured to ensure
personal safety. Please read the following carefully before
using the product. Incorrect operation or incompatibility with
your device may result in reduced battery performance or
damage to your device.
Ÿ Check voltage of your device for compatibility with the
product.
Ÿ Do not attempt to disassemble the product.
Ÿ Store and operate between 23°F to 113°F (-5°C to
45°C). Keep the product away from any heat sources.
Temperatures over 140°F (60°C) may cause damage.
Ÿ Keep the product dry and away from water. Do not bring
this product in contact with liquids. Do not drop, throw,
impact or shake the product.
Ÿ Do not operate the product if it has been subjected to
shock or damage.
Ÿ Do not solder, crush or puncture the product.
Ÿ Recharge the product every 3 months when not in use.
Use a soft cloth to clean the exterior. Do not use harsh
chemicals or strong cleaning solvents.
Ÿ Always keep the product out of the reach of babies and
small children, in order to prevent any dangerous
situations.
SECTION 5 SAFETY PRECAUTIONS
NOTE: Improper use of the Solpro Gemini™
will void the warranty.
SECTION 6 PACKAGE CONTENTS
Ÿ Solpro Gemini™
Ÿ USB to micro-USB Data & Charging Cable
Ÿ Solpro Gemini™ User Manual
SECTION 7
WARRANTY
Solpro Gemini™ is only serviceable by an authorized repair
facility. Do not dismantle. Warranty is void if the device is
opened by unauthorized personnel. Registration for the limited
warranty described on Solpro Inc. website can be completed by
going online to www.solpro.com/warranty_registration.
This is the sole and exclusive warranty provided by Solpro Inc.
In no event will Solpro Inc. be liable for any indirect or incidental
damages or losses of any kind arising from or as a result of
misuse or abuse, or the incorrect installation or operation of the
Solpro Gemini™.
Contact Information:
marketing@solpro.com
SECTION 4 PART IDENTIFICATION
(1). USB Output charge port: 5.0V / 2.1A Max
(2). Third blue LED on: 71%-100% of battery charge
(3). Second blue LED on: 31%-70% of battery charge
(4). First blue LED on: 10%-30% of battery charge
(5). Orange LED on indicates the Solpro Gemini™ is being
solar charged
(6). Micro-USB Input port: 5.0V / 1.0A
(7). Test button: Press to check internal battery charge level
(8). Mono-Cr ystalline solar panel
(1)
(6)
(2)
(3)
(4)
(5)
(7)
(8)
Battery Cell: Lithium-Polymer
Power Capacity: 2800mAh @3.7V
Solar Panel: Mono-Crystalline
Rated Input: USB 5.0V / 1.0A
Rated Output: USB 5.0V / 2.1A Max
+
Charging Time: By Solar Panel: 20 hours
By Micro-USB input port: 4 hours
Dimensions: 4.17 x 2.48 x 0.43 In (106 x 63 x 11 mm)
Weight: 0.20 lb (93g)
+
Under Standard Test Conditions (STC)
SECTION 3 TECHNICAL SPECIFICATIONS
There are 2 ways to charge the Solpro Gemini™:
Method 1:
Connect the USB cable provided into any standard USB 5V
power supply and plug the micro-USB end into the “IN” port (6)
of the Solpro Gemini™.
After connected, the blue LED indicators will light up showing
that the Solpro Gemini™ is being charged:
Ÿ First blue LED ashing: battery between 10%-30%
Ÿ Second blue LED ashing: battery between 31%-70%
Ÿ Third blue LED ashing: battery between 71%-100%
Ÿ When the Solpro Gemini™ is nished charging, all three
blue LED indicators will remain lit for as long as the power
supply is connected.
Method 2:
Charging with the built in solar panel. Position the Solpro
Gemini™ so the solar panel is receiving sunlight. The orange
solar charge LED indicator (5) will be ON when sufcient solar
energy is being received to charge the internal battery.
Check Battery Charge Level: To check the battery charge
status when not charging the Solpro Gemini™, press the
button next to the LED indicators (7). The blue LED indicators
will light indicating battery charge level. The blue LEDs will turn
off automatically after a moment.
SECTION 1 CHARGING SOLPRO GEMINI™
1. Insert the USB charging cable into the USB output port of
the Solpro Gemini™.
2. The blue LED indicator will turn ON automatically when
the Solpro Gemini™ is being used to charge your device,
and off again after a moment. The number of lights lit
indicates the battery charge level.
SECTION 2 CHARGING YOUR DEVICES
WARNING: Use the Solpro Gemini™ to charge
only standard 5V USB devices.
Loading...