Solid State Logic CSB 120, CSB 82, CSB 52 User Manual

SANDBLASTER

COMMERCIAL

MODELS

CSB 52, 82, 120

IMMERSION MOUNT THERMOSTATS

(Optional)

Low Lead Content

COMMERCIAL ELECTRIC WATER HEATERS

Designed for use as a recovery heater having its own storage tank or booster for
supplying sanitizing rinse water for dishwashing.

FEATURES

Meets the standby loss requirements of the U.S. Department of Energy and current
edition ASHRAE/IESNA 90.1.

ADVANCED ELECTRONIC CONTROL - Plain English text and animated icons

display detailed operational and diagnostic information. Fault or Alert messages appear
if an operational issue occurs. Immersion temperature control adjustable through a
range of 90°F to 190°F.

■

iCOMM™ compatible and can be monitored from remote locations. Call 1.888.WATER02
for more information.

ECONOMY MODE OPERATION - Control system automatically lowers the

Operating Set Point by a programmed value during user-defined time periods. Helps
reduce operating costs during unoccupied or off - peak demand periods.

LINEAR SEQUENCING - Banks of heating elements (3 elements per bank) are

energized according to adjustable (1 to 20°) differential set points for each bank. First
bank on is the last bank off. Helps reduce current surge and provides accurate water
temperature control.

GOLD ELEMENTS - CSB models ship with the gold plated elements (see element

availability chart on back). Patented elements provide long life and superior scaling
resistance. Low watt density means lower surface temperature to minimize scale buildup
and more surface to heat water. Gold elements carry a one-year warranty against failure

due to lime scale buildup.

GLASSLINED TANK - Three sizes: 50, 80 and 119-gallon capacity. Tank interior is

coated with glass specially developed for water heater use. Tanks rated at 150 psi (1034
kPa) working pressure (ASME 150 psi). Foam insulation reduces costly heat loss, and is
vermin proof.

FUSING - Protects all elements, thermostats, and internal wiring circuits against excess

current flow. Meets National Electrical Code requirements that non-ASME tanks must
have internal fusing when current draw exceeds 48 amps.

STANDARD VOLTAGES - 208, 240 and 480V single-phase and three-phase delta.

Convertible from three-phase to single-phase (in field) and vice versa. 277V single-phase
also available.

TERMINAL BLOCK - Factory installed. Just bring the service to the heater and

connect to block.

MAGNETIC CONTACTORS - Heavy duty, UL rated 100,000 cycles.
OTHER STANDARD FEATURES -

■

Immersion style thermostats Simplified circuitry, color coded for ease of service

■

Two anode rods for maximum corrosion protection Cabinet has bonderized
undercoat with baked enamel finish
drain valve CSA certified and ASME rated T&P Relief Valve Single panel control box

■

THREE YEAR LIMITED TANK WARRANTY - For complete warranty information,
consult written warranty or contact State Water Heaters.

■

OPTIONS -

■

UL listed conversion kits to adjust voltage and kW requirements in the field before
and after installation ASME 150 psi tank construction International voltages - 220,
380, 400, 415, 575, and 600 volts, three phase available with Y connected elements
MANIFOLD KITS - for multiple tank installations. Two heaters -part # 9003429205, three
heaters- part # 9003430205 and four heaters- part # 9003431205

■

■

■

Bottom inlet and top outlet openings Brass

■

■

■

■

■

For more information on this product contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015

800.365.0024 Toll-free USA
www.statewaterheaters.com

Revised May 2011 80600SSECS

SOLID.STATE.

COMMERCIAL

RECOVERY RATE IN GALLONS PER HOUR AT TEMPERATURE RISE OF

Standard
kW Input

13.5 46,075 184

40.5 138,226 554

Figured at 1 kW (3413 BTU) = 4.1 Gallons at 100°F temperature rise.

BTU/ Hour3O°

6 20,478 82

9 30,717 123

12 40,956 164

15 51,195 205

18 61,434 246

24 81,912 328

27 92,151 369

30 102,390 410

36 122,868 492

45 153,585 615

54 184,302 738

17°C

310

4659234974279622335319946174411553714034127311162810726100

620

698

775

930

1241

1396

1551

1861

2094

2326

2791

F

40°F

5O°F

60°F

70°F

8O°F

9O°F

100°F

110°F

22°C

28°C

33°C

39°C

45°C

50°C

62

2334916641155351333111627103

123
46598372823107026661233552074918645169411553814335133
138

111

523

419923497929969262622335520950190461744316140150
154
582
184
698
246
930
276

1047

307

1163

369

1396

418

1570

461

1745

554

2094

102

123

465

3888833277291682586123356211511944714944166

148

123
558
197
744
221
938
246
930
295

1117

332

1256

369

1398

443

1675

105

465

39992349823107427967254622335721553199

164

140
532
158
509
176
665
211
798
237
897
263
997
316

1196

123
465
138
523
154
582
184
698
208
785
230
872
277

1047

620

185

609

205

775

246

930

277

1047

307

1163

359

1396

56°C

25 9322852178197218

109
4149837290338823107628670266
123

111

465

410

137

123

517

465

164

148

620

556

185

166

698

628

205

184

755

698

246

221
837

930

120°F

61°C

67°C

101
391923408532279299
112

102

423

3889535888332

134

123

508

465

151

138

634

582

168

154

634

582

201

185

761

696

130°F

72°C

113
429
128
537
142
537
170
644

140°F

78°C

66

105
399
119
498
132
498
158
598

142
153

158.1

Element

Wattage

Dimensions

21 3/4

55.2

25 1/2

64.8

29 1/2

75.0

Inlet/

Outlet (NPT)

27

68.6

78.7

88.9

1 1/4
1 1/4
1 1/4

31
35

Approx. Ship.

Wt. (Lbs.)

3.2 265 120

3.2 280 127

3.2 390 177

Full Load Current In Amperes

Single Phase Three Phase

kW

Input

Number

CSB 52**IFE
CSB 82**IFE

CSB

Model Numbers

Tank Capacity in Gallons

Model

Tank

Capacity
gal.

litre

50 189
80 300

120**IFE 119 450

ABC

in. cm in. cm in. cm in. cm Ib kg

55 3/4
60 1/4

62 1/4

Number

Of

Elements

6 CSB 52 6 IFE CSB 82 6 IFE CSB 120 6 IFE 3 2,000 28.8 25.0 21.7 12.5 16.7 14.4 7.2
9 CSB 52 9 IFE CSB 82 9 IFE CSB 120 9 IFE 3 3,000 43.3 37.5 **32.5 18.8 25.0 21.7 10.8

12 CSB 52 12 IFE CSB 82 12 IFE CSB 120 12 IFE 3 4,000 57.7 50.0 43.3 25.0 33.3 28.9 14.4

13.5 CSB 52 135 IFE CSB 82 135 IFE CSB 120 135 IFE 3 4,500 64.9 56.3 **48.7 28.1 37.5 32.5 16.2
15 CSB 52 15 IFE CSB 82 15 IFE CSB 120 15 IFE 3 5,000 72.1 62.5 **54.2 31.3 41.6 36.1 18.0

18 CSB 52 18 IFE CSB 82 18 IFE CSB 120 18 IFE 3* 6,000 86.5 75.0 65.0 37.5 50.0 43.3 21.7
24 CSB 52 24 IFE CSB 82 24 IFE CSB 120 24 IFE 6 4,000 115.4 100.0 86.6 50.0 66.6 57.7 28.9
27 CSB 52 27 IFE CSB 82 27 IFE CSB 120 27 IFE 6 4,500 129.8 112.5 **97.5 56.3 74.9 65.0 32.5
30 CSB 52 30 IFE CSB 82 30 IFE CSB 120 30 IFE 6 5,000 144.2 125.0 **108.3 62.5 83.3 72.2 36.1
36 CSB 52 36 IFE CSB 82 36 IFE CSB 120 36 IFE 6* 6,000 173.1 150.0 130.0 75.0 99.9 86.6 43.3

*208 volt models may contain three (3) additional elements. ** Elements available in incoloy only.

SUGGESTED SPECIFICATION

The heater(s) shall be SandBlaster CSB Series Commercial Electric Model Number ______________ as manufactured by State Industries shall be rated at
____________kW,_______volts, ____________ phase, 60 cycle AC, and listed by Underwriters’ Laboratories and approved to the NSF Standard 5 by UL. Tank(s) shall
be ________ gallon capacity. Tanks shall be 50, 80 and 119 gallon capacity and shall have 150 psi working pressure and be equipped with extruded high density anode.
Water heater shall have LCD display with built-in diagnostic and troubleshooting information. All internal surfaces of the heater(s) exposed to water shall be glasslined with
an alkaline borosilicate composition that has been fused-to-steel by firing at a temperature range of 1400°F to 1600°F. Electric heating elements shall be gold plated low
watt density screw-in type. Control circuit shall be factory fused and include an immersion thermistor temperature probe with built-in ECO control. All internal circuits shall
be fused. The outer jacket shall be of baked enamel finish and shall be provided with full size control compartment for performance of service and maintenance through
hinged front panel and shall enclose the tank with foam insulation. Electrical junction box with heavy duty terminal block shall be provided. The drain valve shall be located
in the front for ease of servicing. Heater tank shall have a three year limited warranty as outlined in the written warranty. Manufacturer shall supply CSA Certified and ASME
Rated T&P Relief Valve. Fully illustrated instruction manual to be included. Meets standby loss requirements of the U.S. Department of Energy and current edition
ASHRAE/IESNA 90.1.

V084V042V802V084V772V042V8029110805

For more information on this product contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015

800.365.0024 Toll-free USA
www.statewaterheaters.com

Revised May 2011 80500SSECS

SOLID.STATE.