Solid Signal HCPOWERBANKPRO User Manual

USB POWER PRO BANK
HIDDEN CAMERA
SKU: HCPOWERBANKPRO
THANK YOU FOR PURCHASING THE USB POWER PRO BANK HIDDEN CAMERA
Please read this manual before operating the USB power pro bank hidden camera and keep it handy.
The HC Power Bank Pro looks and operates exactly like a normal portable battery pack. These devices are normally used for backup or extra power for cell phones and other portable electronics. As phones get more and more powerful, they consume more and more battery life, making a backup charger not only sensible but almost necessary. The HC Power Bank Pro will fit in perfectly with any other portable electronics, making any recordings completely under the radar while it charges your device at the same time! This power bank needs no cables or batteries, making perfect for the covert operative on the go. It doesn't need to be plugged in or require a remote. Recording is as simple as a touch of the button.
Your purchase should include: 1 x USB Power Pro Bank Hidden Camera 1 x USB Cable 1 x Combo Charging Cable 1 x Carrying Case 2 x Back Plates 1 x Instruction Booklet
GET FAMILIAR WITH YOUR USB POWER PRO BANK HIDDEN CAMERA
USB Port
(Computer)
USB Port
(Power)
Indicator
Lights 1-4
USB
Cable
Mini USB
Port
Adaptable USB Cable
Micro USB Adapter
Power
Flashlight
Mic
Camera
Lens
MicroSD
Card Slot
OPERATING THE USB POWER PRO BANK HIDDEN CAMERA
IMPORTANT NOTICE: Allow the device to charge 4 – 6 hours before using.
HOW TO CHARGE THE HC POWER BANK PRO
1. Insert the Micro USB Adapter into the Adaptable USB Cable
2. Insert the Micro USB Adapter into the Micro USB Port of the
HC Power Bank Pro
3. Insert the Adaptable USB Cable into the USB port of your
computer
The blue indicator light #3 will turn on while charging
TIP: You can use the HC Power Bank Pro while it is charging
HOW TO TURN THE HC POWER BANK PRO ON/OFF
1. Ensure you have inserted a MicroSD Card into the MicroSD
Card Slot
2. Press the Power button The blue indicator light #3 will turn on
o The device is now ON and in standby mode
3. To turn the device off, press and hold the Power button The blue indicator light #3 will turn off
o The device is now OFF
TIP: If the blue indictor light #3 is flashing you need to insert a MicroSD Card into the MicroSD Card Slot
HOW TO RECORD VIDEO MANUALLY
1. In standby mode press the Power button once (do not hold) The blue indicator light #3 will flash slowly three times
and then turn off. Video is now be recorded
2. Press the Power button again to stop and save recording
3. The device is now back in standby mode
HOW TO TAKE SINGLE PHOTOGRAPHS
1. In standby mode, quickly press the Power button twice The blue indicator light #3 will flash once
o Your photo has been saved
HOW TO RECORD AUDIO ONLY
1. In standby mode, quickly press the Power button three times The blue indicator light #3 will stay on continuously
and blue indicator light #4 will flash while recording audio
2. Press the Power button again to stop recording
HOW TO RECORD VIDEO USING MOTION DETECTION
1. In standby mode, quickly press the Power button four times
The blue indicator lights #3 and #4 will flash. When movement is detected, indicator #3 turn off and
indicator #4 will flash slowly.
2. Press the Power button again to return to standby mode
TIP: In motion detection mode your video will be saved every 1 minute
HOW TO USE THE FLASHLIGHT FUNCTION
1. In standby mode, quickly press the Power button 5 times
2. To turn off the flashlight, press the Power button 1 time
HOW TO CHARGE OTHER DEVICES
1. Insert the USB Cable or the Adaptable USB Cable into the USB
Port (Power) on the HC Power Bank Pro
2. Insert the USB Cable or the Adapter as needed into the device
you would like to charge
RETRIEVE THE FILES ON YOUR COMPUTER
1. Turn the device ON
2. Insert the USB Cable into the USB port of your computer
3. Insert the USB Cable into the DC 5V 1A USB port on the
device
4. Locate “Removable Disk” inside the (My) Computer folder AutoPlay Removable Disk > Open folder to view files
Or…
Go to Start > Computer > Removable Disk
5. Open the Removable Disk drive
6. Open the DCIM folder
7. Double click the file you want to view VLC Player is recommended for watching videos
HOW TO SET THE TIME/DATE STAMP (Windows only)
1. Turn on the device
2. Connect the device to your computer using the USB cable The device should automatically appear as a
removable disc drive
3. Open the removable disc drive
4. Right click below the DCIM folder with your mouse
5. Scroll down to “New”
6. Click “Text Document”
7. Name “New Text Document” as “timeset”
IMPORTANT NOTICE: The title must be in all lowercase letters
8. Double Left =click the timeset text document to open it
9. Enter the current Year.Month.Day
10. Enter the current Hour:Minute:Seconds in Military format
11. Type “Y” to make the time stamp visible or type “N” to make
the time stamp non visible. An example date is shown below:
2014.09.17 13:33:00 Y
12. Save the timeset text document by going to File > Save
13. Close the timeset text document
14. Disconnect the device from your computer
15. Power on the device. Any files recorded will now have the
time and date you just set
ADJUSTING THE VIDEO RESOLUTION
While you can adjust the video resolution, it is not recommended. The device has a default video resolution of 1280x720 at 30 frames per second. This is a good choice between resolution and video quality. If you still want to change the resolution, please use the following steps:
1. Connect the device to your computer.
2. Open the removable disk drive.
3. Below the DCIM folder, right click, go to New, then choose
Text Document
4. Name the document sizeset (all lowercase)
5. Double Click to open the text file.
6. The contents of the file will be a single number in accordance
with the following options:
1 – 1920 x 1080 @ 10 fps 2 – 1280 x 720 @ 30 fps 3 640 x 480 @ 30 fps 4 320 x 240 @ 30 fps
7. Be sure to only include the number, not the resolution.
8. Go to File > Save to save the file
9. Close Notepad and disconnect the device
10. Turn on the device to update the resolution
TROUBLESHOOTING
THE DEVICE WON’T TURN ON
Charge the device for at least 4 hours before the first use Make sure the charging cable is securely inserted into the
device and into the power source
THE DEVICE ISN’T CHARGING
If available, use a different USB cable If available, use a USB AC adapter
MY COMPUTER DOESN’T RECOGNIZE THE DEVICE
Unplug the device from your PC and reboot the device Unplug the device from your PC and reboot your PC Use a different USB slot on your PC, preferably on the back of
your computer, if available.
Replace the USB cable
THE SOUND OR VIDEO IS UNCLEAR
The device needs charging
OTHER PROBLEMS
Call our technical support at 770–6946923
SPECIFICATIONS
Video Resolution
1280x720
Video Format
AVI
Frames per Second
30
Motion Detection
Yes
Photo Resolution
4032x3024
Photo Format
JPEG
Water Resistant
No
Battery Life
3 hours
Type of Memory
MicroSD Card
Memory Capacity
32GB
Recording Capacity
2GB ≈ 1 hour 4GB ≈ 2 hours 8GB ≈ 4 hours 16GB ≈ 8 hours 32GB ≈ 16 hours
USB Interface
2.0 USB
Player Software
VLC recommended
Operating Systems
Windows 2000 – Windows 8 Mac OSX Linux
Loading...