Sol Expert 44481 User Manual

Firmenanschrift aufbewahren -

4 0 37 37 3 4 44 81 6

Kleinteile! Not suitable for children under 3 years! -

Keep the address of the company -

Contains small parts! Ne convient pas pour les enfants de moins
de trois ans! - Contient de petites pièces pouvant être absorbées! Niet
geschikt voor kinderen beneden 3 jaar! - Kleine onderdelen Kunnen worden ingeslikt!

SOL-EXPERT group, C.Repky - Mehlisstrasse 19 - D-88255 Baindt

Tel.: [phone] - 94115-0 - Fax: [phone]

[e-mail] - www.sol-expert-group.de

Nicht geeignet für Kinder unter 3 Jahren! - Verschluckbare

Veuillez conserver l'adresse -

Adres bewaren -

10+

MADE IN EUROPE

Return the device
to a certified provider at the
end of its useful life!

SOL-EXPERT

group

group

No. 44481

Hier geht es zur Anleitung:

https://www.sol-expert-group.de/Solar-

QR Codes

Produkte/Modelle-aus­Kunststoff/Bausaetze/Solarboot-Airstream­Bausatz::1258.html?language=de

Parts list:

Qty. Part

1
1
1
1
1

EPP boat hull Buoyant and sturdy
Low-friction motor RF300L
Propeller Diameter: 65 mm
Motor bracket Metal
Solar cell 50 mA@ 2 - 3 V

Check and

sort out parts!

Click here for the instructions:

https://www.sol-expert-group.de/Solar­products/Models-made-of­plastic/Building-kits/Solar-boat­Airstream-kit::1258.html?language=en

Property

You will also need: glue gun

Cliquez ici pour les instructions:

https://www.sol-expert-group.de/Articles­solaires/ModEles-rEduits-en-plastique/Kits­d-039-assemblage/Bateau-solaire­Airstream-kit::1258.html?language=fr

Conrad No. 1818585

Klik hier voor de instructies:

https://www.sol-expert-group.de/Producten-op­zonne-energie/Modellen-van­kunststof/Bouwsets/Zonneboot-Airstream­kit::1258.html?language=nl

GLUEGLUE

Dimensions:

150 x 70 x 70 mm

CAUTION:

The glue coming out of the glue gun is very
hot. Be very careful not to get it on your
skin. If it does get on your skin, immediately
cool the area with water and seek medical
attention if the glue does not come off on ist
own. The nozzle on the glue gun also
becomes very hot during use.
Be careful not to burn yourself on it.

The tough part about hot glue:
The glue remains very hot for some time after
being applied with the glue gun.

So always wait a good 2 minutes after
applying glue to allow the glue to cool
down. Then continue.

Apply hot glue to the spacer, then attach to the hull (approx. from the edge). Let cool for 2 min.

A

45.00 mm

Rear

15.00 mm

20.00 mm

Attach with

Attach with
hot glue

hot glue

45 mm

round bow

Spacer

Glue the motor bracket onto the middle of the

B

spacer, let cool for 2 min.

Hull

Slide the motor into the motor bracket and attach the propeller.

C

Motor bracket

Spacer

Attach with

Attach with
hot glue

hot glue

Hull

Place the solar cell on top and apply hot glue all around. If the solar place is glued in place clean on all sides, the back of the solar

D

cell will be protected from water.

Spacer

Side view

Attach with

Attach with

Solar cell

Hull

Solar cell

hot glue

hot glue

Attach with

Attach with
hot glue

hot glue

Rear view

Spacer

Hull

Motor

Changes and error reserved, September 2018 / Christian Repky ©