Soleus Air WS2-06E-201, WS2-08E-201, WS2-12E-201, WS2-10E-201 Operating Instructions Manual

V181219

Air conditioner must be upright for 24 hours prior to operating.

This ensures that the compressor will function as intended.

Model

WS2-06E-201 6,200 BTU

WS2-08E-201 8,000 BTU
WS2-10E-201 10,200 BTU
WS2-12E-201 12,000 BTU

Electronic Window Air Conditioner
Operating Instructions

AIR CONDITIONER

2MF3

File No. SA 12793

Thank you for choosing a Soleus Air Window Air Conditioner. This Owner’s Manual will provide
you with valuable information necessary for the proper care and maintenance of your new product.
Please take a few moments to thoroughly read the instructions and familiarize yourself with all the
operational aspects of your new Soleus Air Window Air Conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the
store name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: _____________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT INSTRUCTIONS

PURCHASE INFORMATION

Before installing and using your air conditioner, please read this owner’s manual carefully. Store this manual in a
safe place for future reference. Your safety and the safety of others is very important to us. Please pay attention to
all safety messages outlined in this owner’s manual.

WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic
precautions:

• Plug into a grounded 3 prong outlet.

• Do not remove the ground prong.

• Do not use a plug adapter.

• Do not use an extension cord.

• Unplug the air conditioner before servicing.

• Use two or more people to move and install the air

conditioner.

This is a safety alert symbol.
This symbol alerts you to potential hazards that can harm you or others or even cause death.
All safety messages will directly follow the safety alert symbol and/or the words “DANGER”
or “WARNING.”

All Safety messages alert you of potential hazards, how to reduce the chance of injury, and what
can happen if instructions are not followed correctly.

Failure to immediately follow these in­structions may cause serious injury or
even death.

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord
and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexi­ble cord with no termination on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the
nominal current leakage between the cord shield and either load conductor exceeds a predetermined value.
The cord will remain de-energized until the device has been manually reset. This is intended to reduce the
risk of a fire in the power cord or combustible materials nearby. The cord shields are not grounded and they
must be considered a shock hazard if exposed. The cord shield must not be connected to ground or to any
exposed metal.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly.
To test:

1. Plug power cord into wall outlet, the LED light will turn on.

2. Press TEST Button, circuit should trip, cutting power to the air conditioner. When this occurs, the LED
light will turn off.

3. Press RESET button to restore power to the unit. Once power is restored, the LED light will turn on
again.

If test button is pressed and unit can still be turned on, current leakage has been detected. Do not use the air
conditioner or attempt to reset the LCDI Plug. Contact Customer Service for troubleshooting recommenda­tions.

WARNING:

1. DO NOT press the TEST button while the air conditioner is operating.

2. The TEST and RESET buttons should not be used as “ON” and “OFF” switches.

3. The cord and plug are not intended to offer protection to externally connected loads or supply circuits.

4. The cord and plug are intended for

indoor use only.

POWER CORD AND PLUG

RESET

TEST

LED LIGHT

Note: Your unit’s power cord may
differ from the one shown.

PACKAGE CONTENTS

Top Mounting Rail

Air Conditioner

Side Curtain

Top Mounting Rail

Foam Seal

Insert Strip

Short Screw Long Screw

Sash Lock

Curtain Lock

• Window Air Conditioner (1)

• Remote Control (1)

• AAA Battery (2)

• Top Mounting Rail (1)

• Insert Strip (1)

• Short Screw (8)

• Side Curtain (2)

• Sash Lock (2)

• Foam Seal (1)

• Long Screw for Window Locking Bracket & Cur-

tains (12)

• Curtain Lock (2)

• Owner’s Manual (1)

• Weather Insulation Board (2)

Remote

Control

2 AAA

Batteries

Owner’s

Manual

Weather Insulation Board

SPECIFICATIONS

• Noise level is measured at a distance of 3.28 ft away from the front of the unit in cooling mode.

• Power consumption is measured when the fan runs at the highest speed setting.

• These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

Model WS2-06E-201 WS2-08E-201

Power Supply (Ph/V/Hz) 1/115/60 1/115/60

Rated Cooling Capacity (BTU/h) 6,200 8,000

Cooling Power Input (Watts) 495 667

Rated Current Cooling (Amperage) 4.3 6.5

CEER 12.1 12

Noise Level dB(A) (L/H) 55/58 58/61

Airflow (H/L) CFM 194/158 264/223

Dehumidifying Capacity 30.48 Pints per day 34.8 Pints per day

Product Dimensions (W” x H” x D”) 18.625” x 12.625” x 15.5” 19” x 14.375” x 19.5”

Package Dimensions (W” x H” x D”) 23” x 15” x 18.625” 22.5” x 17” x 21.5”

Net/Gross Weight (Lbs) 46.3/55.1 57.3/63.9

Refrigerant Type R-410A R-410A

Plug Type NEMA 5-15P NEMA 5-15P

Model WS2-10E-201 WS2-12E-201

Power Supply (Ph/V/Hz) 1/115/60

1/115/60

Rated Cooling Capacity (BTU/h) 10,200 12,000

Cooling Power Input (Watts) 850

1,000

Rated Current Cooling (Amperage) 7.5 8.7

CEER 12 12

Noise Level dB(A) (L/H) 55/59

55/59

Airflow (H/L) CFM 264/223

264/155

Dehumidifying Capacity 43.4 Pints per day 52.3 Pints per day

Product Dimensions (W” x H” x D”) 19” x 14.375” x 21.5” 19” x 14.375” x 21.5”

Package Dimensions (W” x H” x D”) 21.3” x 17.1” x 22.7”

21.3” x 17.1” x 22.7”

Net/Gross Weight (Lbs) 66/72 72.7/77.2

Refrigerant Type R-410A

R-410A

Plug Type NEMA 5-15P NEMA 5-15P

ELECTRICAL SAFETY

WARNING:

grounding prong!!

Power supply cord with 3-prong grounding
plug and current detection device

DISCLAIMER

ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE
PRESENATION OF THE MANUFACTURER. SOLEUS N.A. HAS NOT CONDUCTED AN INDEPENDENT TEST TO
VERIFY THE INFORMATION AND SPECIFICATIONS PRESENTED HEREWITHIN.