Soleus Air SH011 Instruction Manual

Soleus Pulse Rhythm BLE

Instruction Manual

SH011

Ref: 13192D/ 02W079G078)

Pulse Rhythm BLE Optical HRM watch

Thank you for purchasing the Pulse Rhythm BLE Optical HRM watch. This product uses an
Electro-optical technology to sense the heart beat. It has two LED beams and electro-optical
cell to sense the volume of blood under your skin.

Push Button location / Main function

WARNING:

• Consult your doctor before you begin a new exercise program. This is important for
persons with pre-existing health problems or persons who have taking medication
regularly.

• This watch provides heart rate measurements. However, this is not a medical device.

• This watch may affect pacemakers. If you have any concerns, consult your doctor before

use.

• Over exercising may result in serious injury or death. If you feel faint, if you become short
of breath, or if you experience pain while doing an exercise, stop immediately and cool
down.

How to wear the watch properly in your forearm:

• Fasten the watch snugly so that the optical sensor makes a tight contact with your skin.
The tighter you can wear the watch the better.

• Wear the watch not on your wrist bone but higher on your forearm.

• If the Heart rate data displayed in the watch is not stable or erratic, try to move the

watch along your forearm within the best wearing position as shown.

Important reminder:

Before starting your exercise

• You may need to tighten the strap.

* After sweating, you have to tighten again the strap of the watch for more accurate

measurement

• Make sure the heart rate reading is already stable.

• Minimize extreme wrist movement while the HR is in use.

Caring for your Watch:

• Clean your watch with a dampened cloth preferably with mild detergent solution. Wipe dry
using a dry cloth. Do not use chemical cleaners and solvents that may damage plastic
components.

• Do not store your Watch to prolonged exposure to extreme temperatures as this may

result to permanent damage to your unit

Soleus Pulse Rhythm BLE

How to turn On the HRM watch:

• Turn On the HRM by doing any of the following:

a. Press S1 while in Time mode and it will then search the HRM signal. Once

signal is received, it will automatically show your heart rate.

b. Press S7 from TIME mode to go to HRM mode.

• It will then SEARCH HRM signal. Once signal is received, it will automatically show

your heart rate.

c. Press and hold S5 from TIME mode to go to HRM mode.

• The HRM ON screen will appear momentarily then “SEARCH HRM” signal.

Once signal is received, it will automatically show your heart rate.

d. Press S7 from TIME mode to go to CHRONO mode.

• It will then “SEARCH HRM” signal. Once signal is received, it will automatically

show your heart rate.

e. Press S7 from TIME mode to go to TIMER mode.

• It will then “SEARCH HRM” signal. Once signal is received, it will automatically

show your heart rate (press S5 to go to next view to show the heart rate).

Notes:

! While in Time mode, press and hold S11 to turn the Bluetooth ON or OFF.
! When press and hold S7 from any mode where the chronograph is running, the

watch will go back to TIME mode.

! In any mode, press and hold S5 to turn OFF the HRM.
! Please set the TIMERS (in SET mode) first before using this mode.

Soleus Pulse Rhythm BLE

How to pair the watch with Smartphone:

1) Press and hold S11 of your watch while in TIME mode. The pairing ID screen appears.

2) Open the Smart Life App on your Smartphone to pair.

Notes:

! If pairing is successful, the “OK” appears.
! If pairing is not successful, after about 1 minute, the “FAIL” appears.
! In any mode except Data and Set mode, press and hold S11 to turn OFF the

Bluetooth and it will display “OFF”.

Knowing the watch

1) How to change views in CHRONO mode while chronograph is running/reset.

• Press S7 from Time mode to go to CHRONO mode.

• Press S5 to change the information displayed in Line 1.

The watch will remember the last view you have selected and display it first the next time
you enter CHRONO mode.

2) How to change views in HRM mode

• Press S7 from Time mode to go to HRM mode

• Press S5 to change the information displayed in Line 2.

The watch will remember the last view you have selected and display it first the next time
you enter HRM mode.

3) How to change views in CHRONO mode and HRM mode while the chronograph is

stopped.

• Following are the information as you press S5: