Soleus Air LX-120BL, LX-120, LX-100 Owner’s Manual

10,000 / 12,000 BTU Portable Air Conditioner

LX-100/LX- 100 BL/LX- 120/LX- 120BL

Operating Instructions

I ,,

Ih,:

i,i,

' i

li'

il'

_,_1_ "'-; ......

iiiill.................................

,,,,111111111111111111111111

.;_,_._;. _,rF",< ro,

Model No. LX- 100/120

,(:,2006 Soleus Air International

Thank you for choosing a Soleus Air Portable Air Conditioner. This owner's manual will provide you

with valuable information necessary for the proper care and maintenance of your new product. Please

take a few moments to thoroughly read the instructions and familiarize yourself with all the opera- tional aspects of your new Soleus Air Portable Air Conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store

name/location, date purchased, and serial number below:

Store Name: Location:

Date Purchased:

Serial Number (located on back of unit):

IMPORTANT INSTRUCTIONS

Before installing and using your portable air conditioner, please read this owner's manual carefully. Store this manual in a safe place for future reference.

1) Always place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this manual.

3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or outlet grilles.

4) The unit must be connected to a correctly grounded power supply.

5) Do not start or stop the unit by inserting or pulling out the power plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this manual.

9) Do not let children play near this unit.

10) Always inspect the cord for signs of damage be%re use. If the power cord is damaged, it must be replaced by the manufacturer or a qualified service technician.

11) When cleaning the unit, always turn the unit off and unplug the power cord.

PACKAGE CONTENTS

Portable Air Conditioner Exhaust Hoses (2)

Hose Adapters (2) Window Kit Adapter (2)

Remote Control AAA Batteries (2) Window Kit - 3 Sliding Panels (1 dual hose panel, 2 extension panels)

Air Intake and Outlet Covers (2) Owner's Manual

SPECIFICATIONS

• The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F.

• Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode.

• Power consumption is measured when the fan runs at the highest speed setting.

• These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

• If the environment temperature is higher than the max operating temperature or lower than the minimum operating temperature, the air conditioner may not work properly.

MODEL

COOLING CAPACITY

HEATING CAPACITY

DEHUMIDIFYING CAPACITY

POWER COOLING

AIR FLOW VOLUME

POWER SOURCE

SOUND PRESSURE LEVEL

NET WEtGHT

OPERATING

TEMPERATURE

HEATING

COOLING

HEATING

LX-100 & LX-100BL/LX-120 & LX-120BL

10,000 BTU/H / 12,000 BTU/H

1350 Watts / 1350 watts

50 pts/Day / 60 pts/Day

1020 W / 1350 W

1350W / 1350W

225 CFM

115 V~60 HZ

9/12 AMP / 12/12 AMP

COOLI NG/H EATI NG

46 dB(A)

76 Lbs / 82 Lbs

60.8°_:'-107.6°_:'

23_t-'_89.6_t-'

DIMENSIONS

ASSEMBLED

PACKAGE 22.4" W × 34.44" H × 19.88" D

REFRIGERANT R22

17.5"W x32.75" H x19" D

PRODUCT DIAGRAM

Signal Rece

Control Panet

Filter Compartment

Air Outlet Ho_

Drain Po_

Evaporator Air Inta_e

Air Intake He_

Air intake CovedFilter

PARTS & ASSEMBLY

PARTS

EXHAUST HOSES

Hose Adapter

Wl N DOW KIT

Exhaust Hose

- Window Kit Adaptor

ASSEMBLY & INSTALLATION

INSTALLATION

When the unit is operating as an air conditioner or dehumidifier, the unit draws in flesh outdoor air and exhausts hot air out of the room to complete the air exchange. When the unit is operating in tan or heater modes, no outdoor air exchange takes place. The window kit and exhaust hose do not need to be installed when the unit is used as a fan or heater.

NOTE: The supplied window kit can be installed in sliding windows and sliding glass doors up to 8 ft. long

(approximate length).

MOUNTING THE EXHAUST HOSES

* Choose a suitable location, near a grounded electrical outlet and suitable window or door. Remove

packaging and locate components.

. Extend both ends of the exhaust hoses approximately 6 inches. . Screw the window kit adapter onto one end of the exhaust hose clockwise. Screw the hose adapter onto

the other end of the exhaust hose clockwise. Repeat on the other exhaust hose.

. Remove outlet covers flom the back of the unit by screwing them counter-cloclcwise, then lifting up. . Mount the exhaust hoses onto the back of the unit by locking the hose adapters into place.

+ 9 hidden pages