Soleus Air KFHHP-22-OD, KFHHP-22-ID User Manual
Wall Mounted Mini Split
Heat Pump
OPERATING AND INSTALLATION MANUAL
Model: KFHHP-22-ID / KFHHP-22-OD
Air Conditioner
Indoor Unit.
Outdoor Unit.
Thank you for selecting Soleus Air. To ensure proper
operation, please read this manual and keep it for
future reference.
TABLE OF CONTENTS
OPERATION AND MAINTENANCE…………..………..…………………………………….....1-12
Instructions before Use
……………………………………………………………………………1-2
Description of Air Conditioner Components………………………………………………...………3
Remote Control Operation…………………………………………………………………………4-6
How to Insert Batteries…………………………………………………….…………………………6
User Notices…………………………………………………….………………….…………………7
Care and Maintenance………………………………………………….......……………...….……8-9
Trouble-Shooting…………………………………………………….…...……..…………..…….9-10
Specifications and Technical Data………………………………...…….…....………...……..…….11
INSTALLATION………………………………………………...………..……...………….……12-21
Installation Diagram……………………………………………………………………..………….12
Installation Location………………………………….……………………………..………………13
Installation………………………………...……...……………………………………...………14-20
Test Operation and Check after Installation…………………………………………….………..…21
ELECTRICAL SCHEMATIC DIAGRAM…………………………………...………..…………22-23
Electrical Schematic Diagram (Indoor Unit)…………………………...……………......………….22
Electrical Schematic Diagram (Outdoor Unit)………..……………………….……………………23
WARRANTY…………………………………………………………………………………………24
Thank you for selecting Soleus Air. To ensure proper operation, please read this
manual and keep it for future reference.
Danger Caution.
This mark indicates a direction/procedure that
must be followed!
◆ Instructions before Use
Carefully read the following instructions before use
Operation and Maintenance
Warning
★Do not use flammable liquids on or near this air
conditioner.
★Do not use for long periods of time if the
humidity is high. Condensation may be present.
Touching metal parts after removing filter can
★
cause an electric shock.
★Don’t operate the air conditioner with web
hands. It can cause an electric shock.
★Do not insert your hands or any other object into
the air intake or outlets.
★If your air conditioner malfunctions,
discontinue use and call your authorized dealer.
- 1 -
◆Instructions before Use
★Don’t attempt to repair the air conditioner by
yourself. There are no user replaceable parts.
Please contact your authorized dealer.
★Always use new batteries in your remote.
Never mix batteries.
★Be sure to turn the power off when not using the
air conditioner for a long time.
★The condensing unit should be
securely mounted to avoid
damage.
★Don’t step on the top of the
outdoor unit.
★Never store flammable liquids near your air
conditioner.
★Don’t block the air intake or
outlet vents of both the outdoor
and indoor unit. It can decrease
the air conditioning capacity or
cause a malfunction.
- 2 -
◆Description of Air Conditioner Components
On/Off Switch
Signal Sensor
Connecting Pipe /
Line set
- 3 -
◆Remote Control Operation
Function-Remote control
Note:
• Don't drop the remote control.
• Don't place the remote control in a location exposed to direct sunlight.
• When the unit is restarted after stopped, it will automatically resume its last running mode, and the
outdoor unit will start there after.
TEMP+ TEMP- Button:
Under the COOL, DRY,
FAN or HEAT mode, press
these two buttons could set
the temperature, the temp.
setting range is 60.8°F
-86°F, the temp. can be
memorized under each
mode.
MODE Button:
When the unit is
turned on, press this
button. The AUTO,
COOL, DRY, FAN or
HEAT mode can then
be selected.
FAN SPEED Button:
When the unit starts up,
under the AUTO, COOL,
FAN or HEAT mode, press
this button and select Auto
fan, Low fan, Middle fan,
High fan. At DRY mode,
the fan speed runs at Low
fan speed. The FAN
SPEED can be memorized
under various modes.
SLEEP Button:
Under COOL, DRY &
HEAT mode, press the
button once to start the
SLEEP function, when
pressed again, it will stop.
CLOCK Button:
When pressing this button
once, the icon of CLOCK
will flash, and can be
adjusted. At CLOCK
adjustment, press the
TIME+ once, the ones
placed on the minute will
be increased 1, and
continuously press 1 sec
above, the tens place on
the minute will be
increased 1 in every half
second. When pressing
the TIME-, the ones
placed on the minute will
be decreased 1, and
continuously press 1 sec
above, the tens place will
be decreased 1 in every
half second. After
adjusting please press the
CLOCK button again for
confirming.
- 4 -
◆Remote Control Operation (Continued)
Liquid Crystal Display.
It shows all set contents.
ON/OFF Button
Press ON.
Press OFF.
T-ON Button.
When pressing this button
once, enter into T-ON
setting, the icon of T-ON
flash, every press of
TIME+, the time of T-ON
will be increased 1min.
When continuously press 1
sec above, the tens placed
on minute will be increased
1, every press of TIMEwill be decreased 1 minute,
when continuously press 1
sec above, the tens placed
on minute will be decrease
1 in every half second, and
it goes round with 12 hours.
SWING Button:
Press once to have louvers
swing [oscillate]. Press
twice in one second the
panel light will turn on.
Press twice again and the
light will turn off.
T-OFF Button
Press this button once to
enter into T-OFF setting,
the icon of T-OFF will
flash, the T-OFF button
is available in ON or
OFF mode, the setting
method is the same with
T-ON.
CANCEL Button
Pressing this button will
TIME+ TIME- Button
Function instruction please
refer to T-ON button,
T-OFF button, CLOCK
button.
cancel timer.
- 5 -
◆Remote Control Operation (Continued)
The General Procedure:
1. Press ON/OFF button to start the unit.
2. Press MODE button to select the suitable operation mode.
3. Press SWING button to swing. It will stop when pressed again.
4. Press FAN button to set desired fan speed.
5. Press +/- button to set desired temperature.
The Selected Procedure:
6. Press SLEEP button to set timer.
7. Press ON/OFF button to set desired temperature.
Note:
In AUTO mode, the unit will automatically adjust its running modes according to the room
temperature.
◆How to Insert Batteries
The remote control uses two AAA batteries.
1. Remove the cover from the back of the remote control and insert two new batteries.
2. Re-attach the cover.
Note:
• Don’t mix new and used or different types of batteries.
• Remove batteries when the remote control is not in use for a long time.
• Keep remote at least 3.28 feet from TV’s and other electronic devices.
When the wireless remote control is lost or broken, please use the manual switch,
It will start in AUTO mode, the temperature setting and fan speed cannot
be changed. Please use a ball point pen or similar device to operate switch.
Turn on the unit: By pressing the Manual Switch the unit will start in AUTO automatically.
The microcomputer will adjust to the indoor temperature by selecting (COOL, HEAT, FAN), in order to
achieve a comfortable condition.
• Turn off the unit: When unit is running, press the manual switch STOP button, the unit will stop running.
- 6 -
Loading...