Soleus Air GM-TTW-12HC, GM-TTW-10HC, GM-TTW-14HC User Manual
Models
GM-TTW-10HC
GM-TTW-12HC
GM-TTW-14HC
Electronic Through the Wall Air Conditioner
Operating Instructions
Thank you for choosing a Soleus Air powered by Gree Air Conditioner. This owner’s manual will
provide you with valuable information necessary for the proper care and maintenance of your new
product. Please take a few moments to thoroughly read the instructions and familiarize yourself with
all the operational aspects of your new air conditioner.
For your own records, please attach a copy of your sales receipt to this manual. Also, write the store
name/location, date purchased, and serial number below:
Store Name: ____________________________________________________
Location: ______________________________________________________
Date Purchased: _________________________________________________
Serial Number (located on back of unit): ______________________________
IMPORTANT SAFETY INSTRUCTIONS
Before installing and using your air conditioner, please read this owner’s manual carefully. Store this
manual in a safe place for future reference. Your safety and the safety of others is very important to
us. Please pay attention to all safety messages outlined in this owner’s manual.
WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow
the following basic precautions:
x Plug into a grounded 3 prong outlet.
x Do not remove the ground prong.
x Do not use a plug adapter.
This is a safety alert symbol.
This symbol alerts you to potential hazards that can harm you or others or even cause
death.
All safety messages will directly follow the safety alert symbol and/or the words
“DANGER” or “WARNING”.
x Do not use an extension cord.
x Unplug the air conditioner before servicing
x Use two or more people to move and install the air
conditioner
All Safety messages alert you of potential hazards, how to reduce the chance of injury,
and what can happen if instructions are not followed correctly.
2
Failure to immediately follow these
instructions may cause serious injury
or even death.
ELECTRICAL REQUIREMENTS
The electrical ratings for your air conditioner are listed on the model and serial
number label located on the front left side of the unit (when facing the front).
Specific electrical requirements are listed in the chart below. Follow the
requirements below for the type of plug on the power supply cord.
Power Supply Cord
Plug into a grounded 3 prong outlet.
Do not remove the ground prong.
Do not use an adapter
NEMA 6-20P
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock
Electrical Shock Hazard
Recommended Ground Method
For your personal safety, this air conditioner must be grounded. This air conditioner is equipped with a 3 prong power
supply cord with a grounded plug. To minimize the possibility of electrical shock, the cord must be plugged into a 3 prong
outlet and grounded in accordance with all local codes and ordinances. If a 3 prong outlet is not available, it is the customer’s responsibility to have a properly grounded 3 prong outlet installed by a qualified electrician.
It is the customer’s responsibility:
• To contact a qualified electrician
• To assure that the electrical installation is adequate
and in conformance with the National Electrical Code,
Copies of the standards listed may be obtained from:
National Fire Protection Association
One Batterymarch Park
Quincy, Massachusetts 02269
ANSI/NFPA 70 - latest edition, and all local codes and
ordinances.
LCDI Power Cord and Plug
- NEMA 6-20P
This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as
required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination
on the load side and a LCDI attachment plug on the line side.
The LCDI power cord and plug will remove the supply source via electrical disconnect (ci rcuit trip) if the nominal current
leakage between the cord shield and either load conductor exceed s a pre determined value. The cord will remain deenergized until the devise has been manually reset. This is intended to reduce the risk of a fire in the power cord or
combustible materials nearby. The cord shields are not grounded and they must be con side red a shock hazards if
exposed. The cord shield must not be connected to ground or to any exposed metal.
The test and reset buttons on the LCDI Plug are used to check if
the plug is functioning properly. To test the plug:
1. Plug power cord into a wall outlet, the power light will turn
on.
2. Press the TEST Button, the circuit should trip and cut all
power to the air conditioner. The power light will turn off.
3. Press the RESET button for use. The power light will turn
back on.
If a test is performed
and the indicator light remains ON prior to
pressing RESET, current leakage has been detected. Do not
use the air conditioner or attempt to reset the LCDI Plug. Contact Customer Service for troubleshooting recommendations.
3
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this air conditioner
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read
product labels for flammability and other warnings.
ACCIDENT PREVENTION
To reduce the risk of fire, electrical shock, or injury to persons when using your air conditioner, follow basic precautions,
including the following:
x Be sure the electrical service is adequate for the model you have chosen. This information can be found on the se-
rial number plate located on the side of the cabinet or behind the grille.
x If the air conditioner is to be installed in a window, you will probably want to clean both sides of the glass prior to in-
stallation. If the windows is a triple-track type with a screen panel included, remove the screen completely before
installation.
x Be sure the air conditioner has been securely and correctly installed according to the installation instructions pro-
vided with this manual. Save this manual and the installation instructions for future use when removing and reinstalling the unit.
x When handling the air conditioner, be careful to avoid cuts form sharp metal fins on the front and rear coils.
DISCLAIMER
ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE
PRESENTATION OF THE MANUFACTURER. SOLEUS INTERNATIONAL HAS NOT CONDUCTED INDEPENDENT
TEST TO THE INFORMATION AND THE SPECIFICATIONS PRESENTED HEREWITHIN.
4
SPECIFICATIONS
x Noise level is measured at a distance of 3.28 ft away from the front of the unit in cooling mode.
x Power consumption is measured when the fan runs at the highest speed setting.
x These specifications are for reference only. For actual data, please refer to the rating label on the unit.
Model
Power Supply (Ph/V/Hz)
Dehumidifier Capacity (Pints/Day)
Rated Cooling Capacity (BTU/Hr)
Rated Heating Capacity (BTU/Hr)
Cooling Power Input (Watts)
Heating Power Input (Watts)
Rated Current Cooling (Amperage)
Rated Current Heating (Amperage)
EER (Cooling)
Noise Level Indoor/Outdoor [dB(A)]
Air Flow (CFM)
Product Dimensions WxHxD (Inches)
Product Weight (LBS)
Refrigerant
NORMAL OPERATING SOUNDS
GM-TTW-10HC GM-TTW-12HC GM-TTW-14HC
1/230-208/60 1/230-208/60 1/230-208/60
60 91.6 100
10,000/9,700 12,000/11,700 14,000/13,600
10,600/8,600 10,600/8,600 10,600/8,600
1,060/1,030 1,280/1,240 1,650/1,600
3,450/2,800 3,450/2,800 3,450/2,800
4.8/5.1 6.0/6.5 7.0/7.5
15/13.6 15.0/13.6 15/13.6
9.4 9.4 8.5
59/70 59/70 59/57
290 300 320
24 x 14.5 x 20.625 24 x 14.5 x 20.625 24 x 14.5 x 20.625
79.4 81.6 84
R-410A R-410A R-410A
5
Loading...