Soleus Air air-condition,RT-135 Owner's Manual

Please read Owner’s Manual carefully

before operating the unit

.

Main technical parameter of RT-135

Capability Unit Value

Cooling Capacity Btu/h 13500

Watts W 1220

Operating

Capabilities:

Cooling

Rated Full Load Current A 11.2

Heating Capacity Btu/h 14400

Watts W 1620

Operating

capabilities:

Heating

Rated Full Load Current A 14.8

Air Flow Volume

CFM 412/235

Power Supply 115VAC/60HZ/1Phase

Operational Range-Cooling

F 61 to 115

Operational Range-Heating

F 17 to 90

Inside The Room

dB(A) 51

Noise
Level

Outside The Room dB(A) 62

Refrigerant / Amount

ounce R22 / 42

Top Mount Unit 103.5

Net Weight

Indoor Unit

lbs

7.5

Top Mount Unit In 44(W) ×28 3/4(D) ×14 3/4 (H) Assembled

Dimensions

Indoor Unit In 21 1/2(W) ×20 1/2(D) ×3 1/4(H)

RT-135 series dimensions (Unit: In)

SOLEUSAIR

A

1

Use

RT-135 series air-condition have the capability of cooling / heating / ventilation and

dehumidification and contain the character of resisting shake attrition and high-dependability. It

can be used for applications such as RV units, trucks & vans, small-scale shipping vehicles & farm

equipment.

Structure and character

Structure

This air conditioning is in the top of structure

Main components include evaporator, condenser, compressor, throttling device, air blower

system, protection cover, tunnel and the control panel in main cabin.

Character

1) Instant cooling/adjustable temperature: It can reduce the environment temperature in a

short time in order of passenger’s demand.

2) Continuously running in adverse condition.

3) Lengthy continuously running time in acid and alkali condition.

4) The Width & Height capability : The appearance and assembly size keep the same with

present products on the market and helps keep air flow fluent.

5) Quiet operation: Improve comfortableness, low noise.level.

6) Delay start: With sudden loss of power and rapid reset, compressor is time delayed for 3

minutes for protection

Control panel

2

Remote device

Operation through the control panel or remote device

Through the control panel in the room, user can control all functions of the air-conditioner. The

parts of control contain the following functions:

1. Switch

The air-conditioner can be started or stopped by the button “ON/OFF”. The indicator lamp

“POWER” in the upper left corner is lighted when air-conditioner is running.

2. Choose button “MODE”

This button confirms the working status of the air-conditioner.

You can switch it in:”FAN” state, “COOL” state and “HEAT” state.

3. Temperature setting button “TEMP”

Through buttons “▲” and “▼”, you can increase and reduce the setting temperature in the

room.

4. Fan speed switch button “SPEED”

You can switch fan speed in “HIGH” or “LOW”.

5. Temperature showing “temperature”

In holding state, control panel shows present indoor temperature. The control panel shows

temperature in setting state. If you don’t press the “TEMP” key more than ten minutes, the

control panel will be back awaiting state and show present indoor temperature.

6． Push“SPEED+MODE”(in the control panel) or “SET”(in the remote device) into setting state

In this state you can set parameter with “▲” and “▼”.

3