Sole Fitness SC200 Owner's Manual
OWNER’S MANUAL
SC200 Climber Trainer
Please carefully read this entire manual
before operating your new climber.
ATTENTION:
Before returning your Sole product to any retailer, or if you require any assistance with assembly or
technical support please call us first for assistance at 866-697-6531. Thank you for your Sole purchase.
TABLE OF
Product Registration 1
Important Safety Instructions 2
Important Electrical Information 3
CONTENTS
Important Operation Instructions 3
SC200 Assembly Instructions 5
Operation of Your New Fitness Climber 9
Programmable Features 12
General Maintenance 18
Manufacturer’s Limited Warranty 19
AT TE NT IO N
THIS FITNESS CLIMBER IS INTENDED FOR RESIDENTIAL USE ONLY AND IS WARRANTED
FOR THE APPLICATION. ANY OTHER APPLICATION VOIDS THIS WARRANTY IN ITS
ENTIRETY.
Before returning your Sole product to any retailer, or if you require an
assistance with assembly or technical support please call us first for
assistance at 866-697-6531. Thank you for your Sole purchase.
SC200_2016Ver.B
y
IMPORTANT
WARNING - Read all instructions before using this appliance.
DANGER - To reduce the risk of electric shock disconnect your SOLE climber from the electrical
outlet prior to cleaning and/or service work.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install the climber
on a flat level surface with access to a 110-volt, 15-amp grounded outlet with only the climber
plugged into the circuit.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER.
Do not operate climber on deeply padded, plush or shag carpet. Damage to both carpet
and climber may result.
Keep children under the age of 13 away from this machine. There are obvious pinch
points and other caution areas that can cause harm.
Keep hands away from all moving parts.
Never operate the climber if it has a damaged cord or plug. If the climber is not working
properly, call your dealer.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being
administered. Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
Do not use outdoors.
To disconnect, turn all controls to the off position and then remove the plug from the
outlet.
Do not attempt to use your climber for any purpose other than for the purpose it is
intended.
The hand pulse sensors are not medical devices. Various factors, including the user’s
movement, may affect the accuracy of heart rate readings. The pulse sensors are intended
only as exercise aids in determining heart rate trends in general.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use
on your climber. Quality athletic shoes are recommended to avoid leg fatigue.
This appliance is not intended for use by persons with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for
their safety.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
SAFETY
INSTRUCTIONS
SC200 FITNESS
2
CONGRATULATIONS ON YOUR NEW FITNESS CLIMBER AND WELCOME TO THE SOLE FAMILY!
Thank you for your purchase of this quality fitness climber from SOLE. Your new fitness climber has
been manufactured by one of the leading fitness manufacturers in the world and is backed by one
of the most comprehensive warranties available. SOLE will do all we can to make your ownership
experience as pleasant as possible for many years to come.
If you have any questions about your new product contact SOLE Fitness at 866-780-SOLE (7653).
If you have a technical problem with your new fitness climb e r contact SOLE technical service at 866-
MYSOLE1 (1-866-697-6531).
Please take a moment at this time to record below the name of the dealer, their telephone number,
and the date of purchase for easy contact in the future. We appreciate your confidence in SOLE and
we will always remember that you are the reason that we are in business. Please complete and mail
your registration card today and enjoy your new fitness climber.
Your s i n H ea lt h,
SOLE Fitness
Nam of Dealer
Telephone Number of Dealer
Purchase Date
PRODUCT
REGISTRATION
RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this fitness product
in the space provided below.
Serial Number
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and returned to SOLE.
You ca n a ls o go to www.soletreadmills.com under the support tab to register online.
SC200_20151222
1 SC200 FITNESS
3 SC200
FITNESS
IMPORTANT
ELECTRICAL
INSTRUCTIONS
WARNING!
NEVER remove any cover without first disconnecting AC power.
If voltage varies by ten percent (10%) or more, the performance of your fitness climber may be
affected. Such conditions are not covered under your warranty. If you suspect the voltage is
low, contact your local power company or a licensed electrician for proper testing.
NEVER expose this fitness climber to rain or moisture. This product is NOT designed for use out-
doors, near a pool or spa, or in any other high humidity environment. The operating temperature specification is 40 to 120 degrees Fahrenheit, and humidity is 95% non-condensing
(no water drops forming on surfaces).
IMPORTANT
NEVER operate this climber without reading and completely understanding the results of
any operational change you request from the computer.
Understand that changes in resistance and incline do not occur immediately. Set your
desired resistance level on the computer console and release the adjustment key. The
computer will obey the command gradually.
NEVER use your climber during an electrical storm. Surges may occur in your household
power supply that could damage climber components. Unplug the climber during an
electrical storm as a precaution.
Use caution while participating in other activities while using your climber; such as watching
television, reading, etc. These distractions may cause you to lose balance; which may result
in serious injury.
Always hold on to a handle bar while making control changes.
Do not use excessive pressure on console control keys. They are precision set to function
properly with little finger pressure. If you feel the buttons are not functioning properly with
normal pressure contact your SOLE dealer.
OPERATION
INSTRUCTIONS
DC Power Connector Location
SC200
FITNESS
4
SC200
ASSEMBLY PACK CHECKLIST
HARDWARE STEP 1
1
2
108. 3/8” Split Washer
(6 pcs)
HARDWARE
#83. M5 × 10mm Phillips
Head Screw (8 pcs)
#78. 3/8" × 3-3/4"
Hex Head Bolt (2 pcs)
STEP
#106. 3/8" Curved Washer
(2 pcs)
#85. 4mm × 15mm Sheet
Metal Screw (3 pcs)
#100. 3/8" Flat Washer (4 pcs)
#81. 3/8”X3/4” Socket
Head Cap Bolt (4 pcs)
#90. 5/16" Nyloc Nut
(6 pcs)
#113. 5/16” Curved Washer
(4 pcs)
#74. 5/16" × 1-3/4"_
Hex Head Bolt (6pcs)
5 SC200
FITNESS
#116.
#117.
ASSEMBLY
#118. Phillips Head Screw Driver
13/14mm Wrench
TOOLS
#119. M8_L Allen Wrench
12/14mm Wrench
SC200
PRE
1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along
2. Carefully remove all parts from carton and inspect for any damage or missing
3. Locate the hardware package. Remove the tools first. Remove the hardware
ASSEMBLY
-ASSEMBLY
the dotted Line. Lift Box over the unit and unpack.
parts. If damaged parts are found, or parts are missing, contact your dealer
immediately.
for each step as needed to avoid confusion. The numbers in the instructions
that are in parenthesis (#) are the item number from the assembly drawing
for reference.
INSTRUCTIONS
Loading...