Sole Fitness SB900 Owner's Manual
OWNER’S MANUAL
SB900 Indoor Cycle
Please carefully read this entire manual
before operating your new indoor cycle.
Before returning your Sole product to any retailer, or if you require any
assistance with assembly or technical support please call us rst for
assistance at 866-697-6531. Thank you for your Sole purchase.
TABLE OF CONTENTS
Product Registration
Important Safety Instructions
Important Operation Instructions
SB900 Assembly Instructions
Operation of Your New Indoor Cycle
Manufacturer’s Limited Warranty
1
2
2
4
8
16
Before returning your Sole product to any retailer, or if you require any
assistance at 866-697-6531. Thank you for your Sole purchase.
SB900-2014_ver.B
CONGRATULATIONS ON YOUR NEW INDOOR CYCLE AND WELCOME TO THE SOLE FAMILY!
Thank you for your purchase of this quality indoor cycle from SOLE. Your new indoor cycle has been
comprehensive warranties available. SOLE will do all we can to make your ownership
experience as pleasant as possible for many years to come.
If you have any questions about your new product or questions about the warranty contact SOLE Fitness at
1-866-780-SOLE (7653). If you have a technical problem with your new indoor cycle contact SOLE technical
service at 866-MYSOLE1 (1-866-697-6531).
Please take a moment at this time to record below the name of the dealer, their telephone number, and the
SOLE and we will always
remember that you are the reason that we are in business. Please complete and mail your registration card
today and enjoy your new indoor cycle.
Yours in Health,
SOLE Fitness
Name of Dealer
Telephone Number of Dealer
Purchase Date
PRODUCT REGISTRATION
RECORD YOUR SERIAL NUMBER
product in the space provided below.
Serial Number
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and returned to SOLE.
You can also go to www.soletreadmills.com under the support tab to register online.
SB900_20140623
SB900 INDOOR CYCLE1
IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this appliance.
1. Use this equipment only for its intended use as described in this manual. Do not attempt to ride this bike at
high pedal speeds until you have ridden the bike for some time and are comfortable riding at slower pedal
speeds.
2. The bike is NOT equipped with a freewheel system which means that when the ywheel is in motion, the pedals will be in motion. Do not attempt to stop the unit by applying backward pressure to pedals while they are
turning as knee injury may occur. Do not attempt to remove your feet from pedals while they are moving.
3. Wait for ywheel to coast to a stop before dismounting the bike. If you want to stop the ywheel, push down
on the brake knob.
4. Serious injury or death may occur from over-training. Consult a medical doctor or qualied tness instructor to
determine an exercise program appropriate for your level of tness.
5. Do not attempt to turn the pedal cranks by hand. Do not touch any driving mechanism while it is in motion as
possible injury could occur.
6. In a home setting, keep children away from the bike when it is not in use. Keep children and pets away from
the unit while it is in use.
7. Do not attempt to perform dip movements on handlebars.
8. Never drop or insert any object into any opening of the bike.
9. Only use the bike on a stable, level oor.
10. Follow instructions for safe use of the equipment including proper seat position, handlebar position, and use
of foot positioning system of pedals. Do not attempt to pull up handlebar post and seat post over the ‘MAX.’
graduation.
11. For safe operation, allow for at least 1foot (30cm) of free space to either side of the unit and 2 feet (60cm) of
free space to the rear of the unit.
Regularly examine the bike for damage and wear. Inoperable components should be replaced immediately or the
equipment should not be used until it is repaired.
Failure to follow all guidelines may compromise the eectiveness of the exercise experience, expose yourself (and
possibly others) to injury, and reduce the longevity of the equipment.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
IMPORTANT OPERATION INSTRUCTIONS
WARNING - AS THE OWNER OF THIS EXERCISE EQUIPMENT, YOU SHOULD INSIST THAT ALL USERS FOLLOW THE
SAME GUIDELINES: YOU SHOULD MAKE THIS MANUAL AVAILABLE TO ALL USERS.
1. Obtain a complete physical examination from your medical doctor and enlist a health/
tness professional’s aid in developing an exercise program suitable for your current health status.
2. When working out for the rst time, start out slowly for a minimum of ve minutes. After your muscles are
warmed up, gradually increase the pedaling speed and/or resistance.
3. The speed and duration of your exercise program should always be subject to how you feel. Never permit peer
pressure to exceed your personal judgment while exercising.
4. Overweight or severely de-conditioned individuals should be particularly cautious when
using the equipment for the rst time. Even though such individuals may not have histories of serious physical
problems, they may perceive the exercise to be far less intense than it
really is, resulting in the possibility of overexertion or injury.
5. Proper installation and regular maintenance are required to ensure user’s safety.
Maintenance is the sole responsibility of the owner.
2SB900 INDOOR CYCLE
1
SB900 ASSEMBLY PACK CHECKLIST
HARDWARE STEP 1
2
3
#82. 3/8”
Nut (4 pcs)
Button Head Socket Bolt (4 pcs)
HARDWARE STEP 2
#91. M5 x 10mm
Screw (2 pcs)
HARDWARE STEP 3
#81. 3/8” x 3-1/2”
#83. 3/8” x 23mm
Curved Washer (4 pcs)
#49. ø8
Split Washer (4 pcs)
ASSEMBLY TOOLS
#85. Wrench #86. Combination M5 Allen Wrench &
#48. ø8 x 16mm
Flat Washer (4 pcs)
#88. M8 × P1.25 × 20L
Screw (4 pcs)
Phillips Head Screw Driver
SB900 INDOOR CYCLE3
SB900 ASSEMBLY INSTRUCTIONS
PRE-ASSEMBLY
1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along
the dotted Line. Lift Box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing
parts. If damaged parts are found, or parts are missing, contact your dealer
immediately.
3.
for each step as needed to avoid confusion. The numbers in the instructions
that are in parenthesis (#) are the item number from the assembly drawing
for reference.
1
STABILIZER TUBES
82
83
83
81
81
1. Install the front and rear stabilizers with four Button Head Socket Bolts (81),
four Curved Washers (83) and four Nuts (82). The front and rear stabilizer are
the bike.
82
83
82
Front Stabilizer with Wheels
HARDWARE STEP 1
#82. 3/8” Nut (4 pcs)
#81. 3/8” x 3-1/2”
Button Head Socket
Bolt (4 pcs)
#83. 3/8” x 23mm
Curved Washer (4 pcs)
81
4SB900 INDOOR CYCLE
Loading...